# Standards Drift: every tracked EU harmonised standard, one line each # Record as of 2026-10-08. Rebuilt daily. CC BY 4.0. Cite as: Standards Drift, "", , record as of 2026-10-08. # Fields: reference | regime(s) | status | first in OJ | end of legal effect | citing decision(s) | last moved | title | url | cited with (amendments and corrigenda listed under the same OJ entry) # Status values: cited (presumption applies, no end date) · restricted (cited with a restriction notice in the list) · ceasing (end of legal effect set, not yet passed) · ended (every entry's end of legal effect has passed) · draft (in the work programme, not cited) · unlabelled (capture had no column headers). # Dates are the Commission's own columns. Not the legal edition; the authentic text is the Official Journal. Method: https://standardsdrift.com/method/ EN 1005-1:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human physical performance - Part 1: Terms and definitions | https://standardsdrift.com/standards/en-1005-1-2001-a1-2008/ | EN 1005-2:2003+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery | https://standardsdrift.com/standards/en-1005-2-2003-a1-2008/ | EN 1005-3:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation | https://standardsdrift.com/standards/en-1005-3-2002-a1-2008/ | EN 1005-4:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery | https://standardsdrift.com/standards/en-1005-4-2005-a1-2008/ | EN 1010-1:2004+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements | https://standardsdrift.com/standards/en-1010-1-2004-a1-2010/ | EN 1010-2:2006+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery | https://standardsdrift.com/standards/en-1010-2-2006-a1-2010/ | EN 1010-3:2002+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines | https://standardsdrift.com/standards/en-1010-3-2002-a1-2009/ | EN 1010-4:2004+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines | https://standardsdrift.com/standards/en-1010-4-2004-a1-2009/ | EN 1012-1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors | https://standardsdrift.com/standards/en-1012-1-2010/ | EN 1012-2:1996+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps | https://standardsdrift.com/standards/en-1012-2-1996-a1-2009/ | EN 1012-3:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors | https://standardsdrift.com/standards/en-1012-3-2013/ | EN 1028-1:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements | https://standardsdrift.com/standards/en-1028-1-2002-a1-2008/ | EN 1028-2:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements | https://standardsdrift.com/standards/en-1028-2-2002-a1-2008/ | EN 1032:2003+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value | https://standardsdrift.com/standards/en-1032-2003-a1-2008/ | EN 1034-13:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units | https://standardsdrift.com/standards/en-1034-13-2005-a1-2009/ | EN 1034-14:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter | https://standardsdrift.com/standards/en-1034-14-2005-a1-2009/ | EN 1034-16:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines | https://standardsdrift.com/standards/en-1034-16-2012/ | EN 1034-17:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines | https://standardsdrift.com/standards/en-1034-17-2012/ | EN 1034-1:2000+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements | https://standardsdrift.com/standards/en-1034-1-2000-a1-2010/ | EN 1034-21:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines | https://standardsdrift.com/standards/en-1034-21-2012/ | EN 1034-22:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders | https://standardsdrift.com/standards/en-1034-22-2005-a1-2009/ | EN 1034-26:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines | https://standardsdrift.com/standards/en-1034-26-2012/ | EN 1034-27:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems | https://standardsdrift.com/standards/en-1034-27-2012/ | EN 1034-2:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums | https://standardsdrift.com/standards/en-1034-2-2005-a1-2009/ | EN 1034-3:1999+A1:2009 | Machinery | ended | 2010-05-26 | 2012-06-30 | | 2012-06-30 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines | https://standardsdrift.com/standards/en-1034-3-1999-a1-2009/ | EN 1034-3:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders | https://standardsdrift.com/standards/en-1034-3-2011/ | EN 1034-4:2005+A1:2009 | Machinery | ended | 2010-05-26 | 2025-02-02 | | 2025-02-02 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities | https://standardsdrift.com/standards/en-1034-4-2005-a1-2009/ | EN 1034-4:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities | https://standardsdrift.com/standards/en-1034-4-2021/ | EN 1034-5:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters | https://standardsdrift.com/standards/en-1034-5-2005-a1-2009/ | EN 1034-6:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender | https://standardsdrift.com/standards/en-1034-6-2005-a1-2009/ | EN 1034-7:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests | https://standardsdrift.com/standards/en-1034-7-2005-a1-2009/ | EN 1034-8:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants | https://standardsdrift.com/standards/en-1034-8-2012/ | EN 1037:1995+A1:2008 | Machinery | ended | 2009-09-08 | 2020-09-19 | | 2020-09-19 | Safety of machinery - Prevention of unexpected start-up | https://standardsdrift.com/standards/en-1037-1995-a1-2008/ | EN 1088:1995+A2:2008 | Machinery | ended | 2009-09-08 | 2015-04-30 | | 2015-04-30 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection | https://standardsdrift.com/standards/en-1088-1995-a2-2008/ | EN 1093-11:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index | https://standardsdrift.com/standards/en-1093-11-2001-a1-2008/ | EN 1093-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods | https://standardsdrift.com/standards/en-1093-1-2008/ | EN 1093-2:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | https://standardsdrift.com/standards/en-1093-2-2006-a1-2008/ | EN 1093-3:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant | https://standardsdrift.com/standards/en-1093-3-2006-a1-2008/ | EN 1093-4:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method | https://standardsdrift.com/standards/en-1093-4-1996-a1-2008/ | EN 1093-6:1998+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet | https://standardsdrift.com/standards/en-1093-6-1998-a1-2008/ | EN 1093-7:1998+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet | https://standardsdrift.com/standards/en-1093-7-1998-a1-2008/ | EN 1093-8:1998+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method | https://standardsdrift.com/standards/en-1093-8-1998-a1-2008/ | EN 1093-9:1998+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method | https://standardsdrift.com/standards/en-1093-9-1998-a1-2008/ | EN 1114-1:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders | https://standardsdrift.com/standards/en-1114-1-2011/ | EN 1114-2:1998+A1:2008 | Machinery | ended | 2009-09-08 | 2010-10-20 | | 2010-10-20 | Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers | https://standardsdrift.com/standards/en-1114-2-1998-a1-2008/ | EN 1114-3:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | https://standardsdrift.com/standards/en-1114-3-2001-a1-2008/ | EN 1114-3:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | https://standardsdrift.com/standards/en-1114-3-2019/ | EN 1127-1:2007 | Machinery | ended | 2009-12-18 | 2014-07-31 | | 2014-07-31 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | https://standardsdrift.com/standards/en-1127-1-2007/ | EN 1127-1:2011 | Machinery | ended | 2011-11-18 | 2021-10-02 | | 2021-10-02 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | https://standardsdrift.com/standards/en-1127-1-2011/ | EN 1127-1:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | https://standardsdrift.com/standards/en-1127-1-2019/ | EN 1127-2:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining | https://standardsdrift.com/standards/en-1127-2-2002-a1-2008/ | EN 1127-2:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining | https://standardsdrift.com/standards/en-1127-2-2014/ | EN 1129-1:1995 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Furniture - Foldaway beds - Safety requirements and testing - Part 1: Safety requirements | https://standardsdrift.com/standards/en-1129-1-1995/ | EN 1129-2:1995 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods | https://standardsdrift.com/standards/en-1129-2-1995/ | EN 1130:2019 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Children's furniture - Cribs - Safety requirements and test methods | https://standardsdrift.com/standards/en-1130-2019/ | EN 1130:2019/AC:2020 EN 115-1:2008 | Machinery | ended | 2009-09-08 | 2010-09-30 | | 2010-09-30 | Safety of escalators and moving walks - Part 1: Construction and installation | https://standardsdrift.com/standards/en-115-1-2008/ | EN 115-1:2008+A1:2010 | Machinery | ended | 2010-05-26 | 2019-01-31 | | 2019-01-31 | Safety of escalators and moving walks - Part 1: Construction and installation | https://standardsdrift.com/standards/en-115-1-2008-a1-2010/ | EN 115-1:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Safety of escalators and moving walks - Part 1: Construction and installation | https://standardsdrift.com/standards/en-115-1-2017/ | EN 1175-1:1998+A1:2010 | Machinery | ended | 2011-04-08 | 2023-04-15 | | 2023-04-15 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks | https://standardsdrift.com/standards/en-1175-1-1998-a1-2010/ | EN 1175-2:1998+A1:2010 | Machinery | ended | 2011-04-08 | 2023-04-15 | | 2023-04-15 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | https://standardsdrift.com/standards/en-1175-2-1998-a1-2010/ | EN 1175-3:1998+A1:2010 | Machinery | ended | 2011-04-08 | 2023-04-15 | | 2023-04-15 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | https://standardsdrift.com/standards/en-1175-3-1998-a1-2010/ | EN 1175:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Safety of industrial trucks - Electrical/electronic requirements | https://standardsdrift.com/standards/en-1175-2020/ | EN 1175:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Safety of industrial trucks - Electrical/electronic requirements | https://standardsdrift.com/standards/en-1175-2025/ | EN 12001:2003+A1:2009 | Machinery | ended | 2010-05-26 | 2013-03-28 | | 2013-03-28 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements | https://standardsdrift.com/standards/en-12001-2003-a1-2009/ | EN 12001:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements | https://standardsdrift.com/standards/en-12001-2012/ | EN 12012-1:2007+A1:2008 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators | https://standardsdrift.com/standards/en-12012-1-2007-a1-2008/ | EN 12012-1:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders | https://standardsdrift.com/standards/en-12012-1-2018/ | EN 12012-2:2001+A2:2008 | Machinery | ended | 2009-09-08 | 2010-10-20 | | 2010-10-20 | Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers | https://standardsdrift.com/standards/en-12012-2-2001-a2-2008/ | EN 12012-3:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders | https://standardsdrift.com/standards/en-12012-3-2001-a1-2008/ | EN 12012-4:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2024-02-02 | | 2024-02-02 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators | https://standardsdrift.com/standards/en-12012-4-2006-a1-2008/ | EN 12012-4:2019+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators | https://standardsdrift.com/standards/en-12012-4-2019-a1-2021/ | EN 12013:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2020-09-19 | | 2020-09-19 | Plastics and rubber machines - Internal mixers - Safety requirements | https://standardsdrift.com/standards/en-12013-2000-a1-2008/ | EN 12013:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Plastics and rubber machines - Internal mixers - Safety requirements | https://standardsdrift.com/standards/en-12013-2018/ | EN 12016:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2014-02-28 | | 2014-02-28 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | https://standardsdrift.com/standards/en-12016-2004-a1-2008/ | EN 12016:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | https://standardsdrift.com/standards/en-12016-2013/ | EN 12041:2000+A1:2009 | Machinery | ended | 2009-12-18 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Moulders - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12041-2000-a1-2009/ | EN 12041:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Moulders - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12041-2014/ | EN 12042:2005+A1:2010 | Machinery | ended | 2011-04-08 | 2015-02-13 | | 2015-02-13 | Food processing machinery - Automatic dividers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12042-2005-a1-2010/ | EN 12042:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Automatic dough dividers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12042-2014/ | EN 12043:2000+A1:2010 | Machinery | ended | 2011-04-08 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Intermediate provers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12043-2000-a1-2010/ | EN 12043:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Intermediate provers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12043-2014/ | EN 12044:2005+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements | https://standardsdrift.com/standards/en-12044-2005-a1-2009/ | EN 12053:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of industrial trucks - Test methods for measuring noise emissions | https://standardsdrift.com/standards/en-12053-2001-a1-2008/ | EN 12077-2:1998+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2025-08-14 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | https://standardsdrift.com/standards/en-12077-2-1998-a1-2008/ | EN 12077-2:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | https://standardsdrift.com/standards/en-12077-2-2024/ | EN 12110:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Tunnelling machines - Air locks - Safety requirements | https://standardsdrift.com/standards/en-12110-2002-a1-2008/ | EN 12110:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Tunnelling machines - Air locks - Safety requirements | https://standardsdrift.com/standards/en-12110-2014/ | EN 12111:2002+A1:2009 | Machinery | ended | 2009-12-18 | 2015-02-13 | | 2015-02-13 | Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements | https://standardsdrift.com/standards/en-12111-2002-a1-2009/ | EN 12111:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Tunnelling machines - Road headers and continuous miners - Safety requirements | https://standardsdrift.com/standards/en-12111-2014/ | EN 12158-1:2000+A1:2010 | Machinery | ended | 2011-04-08 | 2025-02-02 | | 2025-02-02 | Builders' hoists for goods - Part 1: Hoists with accessible platforms | https://standardsdrift.com/standards/en-12158-1-2000-a1-2010/ | EN 12158-1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Builders' hoists for goods - Part 1: Hoists with accessible platforms | https://standardsdrift.com/standards/en-12158-1-2021/ | EN 12158-2:2000+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices | https://standardsdrift.com/standards/en-12158-2-2000-a1-2010/ | EN 12159:2000+A1:2009 | Machinery | ended | 2009-12-18 | 2013-05-31 | | 2013-05-31 | Builders hoists for persons and materials with vertically guided cages | https://standardsdrift.com/standards/en-12159-2000-a1-2009/ | EN 12159:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2025-08-14 | Builders hoists for persons and materials with vertically guided cages | https://standardsdrift.com/standards/en-12159-2012/ | EN 12159:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Builders hoists for persons and materials with vertically guided cages | https://standardsdrift.com/standards/en-12159-2024/ | EN 12162:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing | https://standardsdrift.com/standards/en-12162-2001-a1-2009/ | EN 1218-1:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2025-11-15 | | 2025-11-15 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table | https://standardsdrift.com/standards/en-1218-1-1999-a1-2009/ | EN 1218-2:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2025-11-15 | | 2025-11-15 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains | https://standardsdrift.com/standards/en-1218-2-2004-a1-2009/ | EN 1218-3:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | https://standardsdrift.com/standards/en-1218-3-2001-a1-2009/ | EN 1218-4:2004+A2:2009 | Machinery | ended | 2009-09-08 | 2016-03-31 | | 2016-03-31 | Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | https://standardsdrift.com/standards/en-1218-4-2004-a2-2009/ | EN 1218-5:2004+A1:2009 | Machinery | ended | 2009-12-18 | 2025-11-15 | | 2025-11-15 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain | https://standardsdrift.com/standards/en-1218-5-2004-a1-2009/ | EN 12196:2003 | General Product Safety | ceasing | 2005-10-15 | 2027-10-27 | | 2026-04-27 | Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-12196-2003/ | EN 12196:2023 | General Product Safety | cited | 2026-04-27 | | 2026/901 | 2026-04-27 | Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-12196-2023/ | EN 12197:1997 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Gymnastic equipment - Horizontal bars - Safety requirements and test methods | https://standardsdrift.com/standards/en-12197-1997/ | EN 12198-1:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles | https://standardsdrift.com/standards/en-12198-1-2000-a1-2008/ | EN 12198-2:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure | https://standardsdrift.com/standards/en-12198-2-2002-a1-2008/ | EN 12198-3:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening | https://standardsdrift.com/standards/en-12198-3-2002-a1-2008/ | EN 12203:2003+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements | https://standardsdrift.com/standards/en-12203-2003-a1-2009/ | EN 12221-1:2008+A1:2013 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Child use and care articles - Changing units for domestic use - Part 1: Safety requirements | https://standardsdrift.com/standards/en-12221-1-2008-a1-2013/ | EN 12221-2:2008+A1:2013 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Child use and care articles - Changing units for domestic use - Part 2: Test methods | https://standardsdrift.com/standards/en-12221-2-2008-a1-2013/ | EN 12254:1998+A2:2008 | Machinery | ended | 2009-09-08 | 2010-09-30 | | 2010-09-30 | Screens for laser working places - Safety requirements and testing | https://standardsdrift.com/standards/en-12254-1998-a2-2008/ | EN 12254:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Screens for laser working places - Safety requirements and testing | https://standardsdrift.com/standards/en-12254-2010/ | EN 12254:2010/AC:2011 EN 12267:2003+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Circular saw machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12267-2003-a1-2010/ | EN 12268:2003+A1:2010 | Machinery | ended | 2010-10-20 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Band saw machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12268-2003-a1-2010/ | EN 12268:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Band saw machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12268-2014/ | EN 12301:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Plastics and rubber machines - Calenders - Safety requirements | https://standardsdrift.com/standards/en-12301-2000-a1-2008/ | EN 12301:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377, 2023/1586 | 2026-09-28 | Plastics and rubber machines - Calenders - Safety requirements | https://standardsdrift.com/standards/en-12301-2019/ | EN 12301:2019/AC:2021 EN 12312-10:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters | https://standardsdrift.com/standards/en-12312-10-2005-a1-2009/ | EN 12312-12:2002+A1:2009 | Machinery | ended | 2009-09-08 | 2018-06-30 | | 2018-06-30 | Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment | https://standardsdrift.com/standards/en-12312-12-2002-a1-2009/ | EN 12312-12:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment | https://standardsdrift.com/standards/en-12312-12-2017/ | EN 12312-13:2002+A1:2009 | Machinery | ended | 2009-09-08 | 2018-06-30 | | 2018-06-30 | Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment | https://standardsdrift.com/standards/en-12312-13-2002-a1-2009/ | EN 12312-13:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment | https://standardsdrift.com/standards/en-12312-13-2017/ | EN 12312-14:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles | https://standardsdrift.com/standards/en-12312-14-2006-a1-2009/ | EN 12312-14:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles | https://standardsdrift.com/standards/en-12312-14-2014/ | EN 12312-15:2006+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors | https://standardsdrift.com/standards/en-12312-15-2006-a1-2009/ | EN 12312-15:2020+A2:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors | https://standardsdrift.com/standards/en-12312-15-2020-a2-2025/ | EN 12312-16:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment | https://standardsdrift.com/standards/en-12312-16-2005-a1-2009/ | EN 12312-17:2004+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-03-13 | Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment | https://standardsdrift.com/standards/en-12312-17-2004-a1-2009/ | EN 12312-18:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units | https://standardsdrift.com/standards/en-12312-18-2005-a1-2009/ | EN 12312-19:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions | https://standardsdrift.com/standards/en-12312-19-2005-a1-2009/ | EN 12312-1:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | https://standardsdrift.com/standards/en-12312-1-2001-a1-2009/ | EN 12312-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | https://standardsdrift.com/standards/en-12312-1-2013/ | EN 12312-1:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | https://standardsdrift.com/standards/en-12312-1-2024/ | EN 12312-20:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units | https://standardsdrift.com/standards/en-12312-20-2005-a1-2009/ | EN 12312-2:2002+A1:2009 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles | https://standardsdrift.com/standards/en-12312-2-2002-a1-2009/ | EN 12312-2:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles | https://standardsdrift.com/standards/en-12312-2-2014/ | EN 12312-3:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2017-07-31 | | 2017-07-31 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | https://standardsdrift.com/standards/en-12312-3-2003-a1-2009/ | EN 12312-3:2017 | Machinery | ended | 2017-06-09 | 2023-04-15 | | 2023-04-15 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | https://standardsdrift.com/standards/en-12312-3-2017/ | EN 12312-3:2017+A1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | https://standardsdrift.com/standards/en-12312-3-2017-a1-2020/ | EN 12312-4:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2014-09-30 | | 2014-09-30 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | https://standardsdrift.com/standards/en-12312-4-2003-a1-2009/ | EN 12312-4:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2025-08-14 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | https://standardsdrift.com/standards/en-12312-4-2014/ | EN 12312-4:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | https://standardsdrift.com/standards/en-12312-4-2024/ | EN 12312-5:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2023-10-11 | | 2023-10-11 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | https://standardsdrift.com/standards/en-12312-5-2005-a1-2009/ | EN 12312-5:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2025-08-14 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | https://standardsdrift.com/standards/en-12312-5-2021/ | EN 12312-5:2021+A1:2025 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | https://standardsdrift.com/standards/en-12312-5-2021-a1-2025/ | EN 12312-6:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2017-09-30 | | 2017-09-30 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment | https://standardsdrift.com/standards/en-12312-6-2004-a1-2009/ | EN 12312-6:2017 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment | https://standardsdrift.com/standards/en-12312-6-2017/ | EN 12312-7:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | https://standardsdrift.com/standards/en-12312-7-2005-a1-2009/ | EN 12312-7:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment | https://standardsdrift.com/standards/en-12312-7-2020/ | EN 12312-8:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms | https://standardsdrift.com/standards/en-12312-8-2005-a1-2009/ | EN 12312-8:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms | https://standardsdrift.com/standards/en-12312-8-2018/ | EN 12312-9:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | https://standardsdrift.com/standards/en-12312-9-2005-a1-2009/ | EN 12312-9:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | https://standardsdrift.com/standards/en-12312-9-2013/ | EN 12321:2003+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors | https://standardsdrift.com/standards/en-12321-2003-a1-2009/ | EN 12331:2003+A2:2010 | Machinery | ended | 2010-10-20 | 2024-02-02 | | 2024-02-02 | Food processing machinery - Mincing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12331-2003-a2-2010/ | EN 12331:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Food processing machinery - Mincing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12331-2021/ | EN 12336:2005+A1:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements | https://standardsdrift.com/standards/en-12336-2005-a1-2008/ | EN 12346:1998 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods | https://standardsdrift.com/standards/en-12346-1998/ | EN 12348:2000+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Core drilling machines on stand - Safety | https://standardsdrift.com/standards/en-12348-2000-a1-2009/ | EN 12355:2003+A1:2010 | Machinery | ended | 2010-10-20 | 2025-02-02 | | 2025-02-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12355-2003-a1-2010/ | EN 12355:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12355-2022/ | EN 12385-10:2003+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | https://standardsdrift.com/standards/en-12385-10-2003-a1-2008/ | EN 12385-1:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire ropes - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-12385-1-2002-a1-2008/ | EN 12385-2:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification | https://standardsdrift.com/standards/en-12385-2-2002-a1-2008/ | EN 12385-3:2004+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire ropes - Safety - Part 3: Information for use and maintenance | https://standardsdrift.com/standards/en-12385-3-2004-a1-2008/ | EN 12385-4:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications | https://standardsdrift.com/standards/en-12385-4-2002-a1-2008/ | EN 12385-5:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621, 2023/1586 | 2026-09-28 | Steel wire ropes - Safety - Part 5: Stranded ropes for lifts | https://standardsdrift.com/standards/en-12385-5-2021/ | EN 12385-5:2021/AC:2021 EN 12387:2005+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements | https://standardsdrift.com/standards/en-12387-2005-a1-2009/ | EN 12409:2008 | Machinery | ended | 2009-09-08 | 2012-04-30 | | 2012-04-30 | Plastics and rubber machines - Thermoforming machines - Safety requirements | https://standardsdrift.com/standards/en-12409-2008/ | EN 12409:2008+A1:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Thermoforming machines - Safety requirements | https://standardsdrift.com/standards/en-12409-2008-a1-2011/ | EN 12417:2001+A2:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machine tools - Safety - Machining centres | https://standardsdrift.com/standards/en-12417-2001-a2-2009/ | EN 12417:2001+A2:2009/AC:2010 EN 12418:2000+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Masonry and stone cutting-off machines for job site - Safety | https://standardsdrift.com/standards/en-12418-2000-a1-2009/ | EN 12418:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Masonry and stone cutting-off machines for job site - Safety | https://standardsdrift.com/standards/en-12418-2021/ | EN 12432:1998 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-12432-1998/ | EN 12453:2017+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods | https://standardsdrift.com/standards/en-12453-2017-a1-2021/ | EN 12463:2004+A1:2011 | Machinery | ceasing | 2011-07-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12463-2004-a1-2011/ | EN 1247:2004+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines | https://standardsdrift.com/standards/en-1247-2004-a1-2010/ | EN 1248:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Foundry machinery - Safety requirements for abrasive blasting equipment | https://standardsdrift.com/standards/en-1248-2001-a1-2009/ | EN 12505:2000+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12505-2000-a1-2009/ | EN 12525:2000+A2:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | 2024/1256 | 2026-09-28 | Agricultural machinery - Front loaders - Safety | https://standardsdrift.com/standards/en-12525-2000-a2-2010/ | EN 12545:2000+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements | https://standardsdrift.com/standards/en-12545-2000-a1-2009/ | EN 12547:1999+A1:2009 | Machinery | ended | 2009-09-08 | 2016-02-29 | | 2016-02-29 | Centrifuges - Common safety requirements | https://standardsdrift.com/standards/en-12547-1999-a1-2009/ | EN 12547:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Centrifuges - Common safety requirements | https://standardsdrift.com/standards/en-12547-2014/ | EN 12549:1999+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Noise test code for fastener driving tools - Engineering method | https://standardsdrift.com/standards/en-12549-1999-a1-2008/ | EN 12581:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | https://standardsdrift.com/standards/en-12581-2005-a1-2010/ | EN 12601:2010 | Machinery | ended | 2011-04-08 | 2017-06-30 | | 2017-06-30 | Reciprocating internal combustion engine driven generating sets - Safety | https://standardsdrift.com/standards/en-12601-2010/ | EN 12609:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Truck mixers - Safety requirements | https://standardsdrift.com/standards/en-12609-2021/ | EN 12621:2006+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2025-08-14 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements | https://standardsdrift.com/standards/en-12621-2006-a1-2010/ | EN 12621:2025 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Machinery for supply and circulation of liquid coating materials - Safety requirements | https://standardsdrift.com/standards/en-12621-2025/ | EN 12622:2009 | Machinery | ended | 2010-05-26 | 2014-04-30 | | 2014-04-30 | Safety of machine tools - Hydraulic press brakes | https://standardsdrift.com/standards/en-12622-2009/ | EN 12622:2009+A1:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Safety of machine tools - Hydraulic press brakes | https://standardsdrift.com/standards/en-12622-2009-a1-2013/ | EN 12629-1:2000+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements | https://standardsdrift.com/standards/en-12629-1-2000-a1-2010/ | EN 12629-2:2002+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines | https://standardsdrift.com/standards/en-12629-2-2002-a1-2010/ | EN 12629-3:2002+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines | https://standardsdrift.com/standards/en-12629-3-2002-a1-2010/ | EN 12629-4:2001+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines | https://standardsdrift.com/standards/en-12629-4-2001-a1-2010/ | EN 12629-5-1:2003+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis | https://standardsdrift.com/standards/en-12629-5-1-2003-a1-2010/ | EN 12629-5-2:2003+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis | https://standardsdrift.com/standards/en-12629-5-2-2003-a1-2010/ | EN 12629-5-3:2003+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines | https://standardsdrift.com/standards/en-12629-5-3-2003-a1-2010/ | EN 12629-5-4:2003+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines | https://standardsdrift.com/standards/en-12629-5-4-2003-a1-2010/ | EN 12629-6:2004+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | https://standardsdrift.com/standards/en-12629-6-2004-a1-2010/ | EN 12629-7:2004+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | https://standardsdrift.com/standards/en-12629-7-2004-a1-2010/ | EN 12629-8:2002+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | https://standardsdrift.com/standards/en-12629-8-2002-a1-2010/ | EN 12635:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Industrial, commercial and garage doors and gates - Installation and use | https://standardsdrift.com/standards/en-12635-2002-a1-2008/ | EN 12643:1997+A1:2008 | Machinery | ended | 2009-09-08 | 2014-08-31 | | 2014-08-31 | Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) | https://standardsdrift.com/standards/en-12643-1997-a1-2008/ | EN 12643:2014 | Machinery | ended | 2014-07-11 | 2022-09-03 | | 2022-09-03 | Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) | https://standardsdrift.com/standards/en-12643-2014/ | EN 12644-1:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Cranes - Information for use and testing - Part 1: Instructions | https://standardsdrift.com/standards/en-12644-1-2001-a1-2008/ | EN 12644-2:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Cranes - Information for use and testing - Part 2: Marking | https://standardsdrift.com/standards/en-12644-2-2000-a1-2008/ | EN 12649:2008 | Machinery | ended | 2009-09-08 | 2012-01-31 | | 2012-01-31 | Concrete compactors and smoothing machines - Safety | https://standardsdrift.com/standards/en-12649-2008/ | EN 12649:2008+A1:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Concrete compactors and smoothing machines - Safety | https://standardsdrift.com/standards/en-12649-2008-a1-2011/ | EN 12653:1999+A2:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements | https://standardsdrift.com/standards/en-12653-1999-a2-2009/ | EN 12655:1998 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-12655-1998/ | EN 1265:1999+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Noise test code for foundry machines and equipment | https://standardsdrift.com/standards/en-1265-1999-a1-2008/ | EN 12693:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors | https://standardsdrift.com/standards/en-12693-2008/ | EN 12693:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors | https://standardsdrift.com/standards/en-12693-2026/ | EN 12717:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machine tools - Drilling machines | https://standardsdrift.com/standards/en-12717-2001-a1-2009/ | EN 1272:2017 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Child care articles - Table mounted chairs - Safety requirements and test methods | https://standardsdrift.com/standards/en-1272-2017/ | EN 12733:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | https://standardsdrift.com/standards/en-12733-2001-a1-2009/ | EN 12733:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | https://standardsdrift.com/standards/en-12733-2018/ | EN 12750:2001+A1:2009 | Machinery | ended | 2009-12-18 | 2013-11-28 | | 2013-11-28 | Safety of woodworking machines - Four-sided moulding machines | https://standardsdrift.com/standards/en-12750-2001-a1-2009/ | EN 12750:2013 | Machinery | ended | 2013-11-28 | 2025-02-02 | | 2025-02-02 | Safety of woodworking machines - Four sided moulding machines | https://standardsdrift.com/standards/en-12750-2013/ | EN 12753:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements | https://standardsdrift.com/standards/en-12753-2005-a1-2010/ | EN 12757-1:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing | https://standardsdrift.com/standards/en-12757-1-2005-a1-2010/ | EN 12779:2004+A1:2009 | Machinery | ended | 2009-12-18 | 2016-05-31 | | 2016-05-31 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements | https://standardsdrift.com/standards/en-12779-2004-a1-2009/ | EN 12779:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements | https://standardsdrift.com/standards/en-12779-2015/ | EN 12786:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards | https://standardsdrift.com/standards/en-12786-2013/ | EN 12790-1:2023 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Child care articles - Reclined cradles - Part 1: Reclined cradles for children up to when they start to try to sit up | https://standardsdrift.com/standards/en-12790-1-2023/ | EN 12790-2:2023 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Child care articles - Reclined cradles - Part 2: Reclined cradles for children up to when they start to stand up | https://standardsdrift.com/standards/en-12790-2-2023/ | EN 12851:2005+A1:2010 | Machinery | ended | 2010-05-26 | 2016-01-15 | | 2016-01-15 | Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12851-2005-a1-2010/ | EN 12852:2001+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12852-2001-a1-2010/ | EN 12853:2001+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12853-2001-a1-2010/ | EN 12853:2001+A1:2010/AC:2010 EN 12854:2003+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Beam mixers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12854-2003-a1-2010/ | EN 12855:2003+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12855-2003-a1-2010/ | EN 12881-1:2005+A1:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests | https://standardsdrift.com/standards/en-12881-1-2005-a1-2008/ | EN 12881-1:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests | https://standardsdrift.com/standards/en-12881-1-2014/ | EN 12881-2:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test | https://standardsdrift.com/standards/en-12881-2-2005-a1-2008/ | EN 12882:2008 | Machinery | ended | 2009-09-08 | 2016-02-29 | | 2016-02-29 | Conveyor belts for general purpose use - Electrical and flammability safety requirements | https://standardsdrift.com/standards/en-12882-2008/ | EN 12882:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Conveyor belts for general purpose use - Electrical and flammability safety requirements | https://standardsdrift.com/standards/en-12882-2015/ | EN 12921-1:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements | https://standardsdrift.com/standards/en-12921-1-2005-a1-2010/ | EN 12921-2:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids | https://standardsdrift.com/standards/en-12921-2-2005-a1-2008/ | EN 12921-3:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids | https://standardsdrift.com/standards/en-12921-3-2005-a1-2008/ | EN 12921-4:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents | https://standardsdrift.com/standards/en-12921-4-2005-a1-2008/ | EN 12957:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2014-02-28 | | 2014-02-28 | Machine tools - Safety - Electro discharge machines | https://standardsdrift.com/standards/en-12957-2001-a1-2009/ | EN 12965:2003+A2:2009 | Machinery | ended | 2009-12-18 | 2022-09-03 | | 2022-09-03 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | https://standardsdrift.com/standards/en-12965-2003-a2-2009/ | EN 12965:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-03-13 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | https://standardsdrift.com/standards/en-12965-2019/ | EN 12965:2019+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | https://standardsdrift.com/standards/en-12965-2019-a1-2025/ | EN 12978:2003+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2025-08-14 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods | https://standardsdrift.com/standards/en-12978-2003-a1-2009/ | EN 12978:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods | https://standardsdrift.com/standards/en-12978-2024/ | EN 12981:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements | https://standardsdrift.com/standards/en-12981-2005-a1-2009/ | EN 12984:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements | https://standardsdrift.com/standards/en-12984-2005-a1-2010/ | EN 12999:2011 | Machinery | ended | 2011-04-08 | 2012-12-31 | | 2012-12-31 | Cranes - Loader cranes | https://standardsdrift.com/standards/en-12999-2011/ | EN 12999:2011+A1:2012 | Machinery | ended | 2012-08-24 | 2020-09-19 | | 2020-09-19 | Cranes - Loader cranes | https://standardsdrift.com/standards/en-12999-2011-a1-2012/ | EN 12999:2011+A2:2018 | Machinery | ended | 2019-03-19 | 2023-04-15 | 2019/436 | 2023-04-15 | Cranes - Loader cranes | https://standardsdrift.com/standards/en-12999-2011-a2-2018/ | EN 12999:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-03-13 | Cranes - Loader cranes | https://standardsdrift.com/standards/en-12999-2020/ | EN 12999:2020+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Cranes - Loader cranes | https://standardsdrift.com/standards/en-12999-2020-a1-2025/ | EN 1299:1997+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation | https://standardsdrift.com/standards/en-1299-1997-a1-2008/ | EN 13000:2010 | Machinery | ended | 2010-05-26 | 2015-02-13 | | 2015-02-13 | Cranes - Mobile cranes | https://standardsdrift.com/standards/en-13000-2010/ | EN 13000:2010/AC:2010 EN 13000:2010+A1:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Cranes - Mobile cranes | https://standardsdrift.com/standards/en-13000-2010-a1-2014/ | EN 13001-1:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2016-02-29 | | 2016-02-29 | Cranes - General design - Part 1: General principles and requirements | https://standardsdrift.com/standards/en-13001-1-2004-a1-2009/ | EN 13001-1:2004+A1:2009/AC:2009 EN 13001-1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Cranes - General design - Part 1: General principles and requirements | https://standardsdrift.com/standards/en-13001-1-2015/ | EN 13001-2:2004+A3:2009 | Machinery | ended | 2009-09-08 | 2011-11-18 | | 2011-11-18 | Crane safety - General design - Part 2: Load effects | https://standardsdrift.com/standards/en-13001-2-2004-a3-2009/ | EN 13001-2:2011 | Machinery | ended | 2011-11-18 | 2016-02-29 | | 2016-02-29 | Crane safety - General design - Part 2: Load actions | https://standardsdrift.com/standards/en-13001-2-2011/ | EN 13001-2:2011/AC:2012 EN 13001-2:2014 | Machinery | ended | 2016-01-15 | 2023-10-11 | | 2023-10-11 | Crane safety - General design - Part 2: Load actions | https://standardsdrift.com/standards/en-13001-2-2014/ | EN 13001-2:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Crane safety - General design - Part 2: Load actions | https://standardsdrift.com/standards/en-13001-2-2021/ | EN 13001-3-1:2012 | Machinery | ended | 2012-06-05 | 2014-01-31 | | 2014-01-31 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | https://standardsdrift.com/standards/en-13001-3-1-2012/ | EN 13001-3-1:2012+A1:2013 | Machinery | ended | 2013-11-28 | 2020-09-19 | | 2020-09-19 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | https://standardsdrift.com/standards/en-13001-3-1-2012-a1-2013/ | EN 13001-3-1:2012+A2:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-03-13 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | https://standardsdrift.com/standards/en-13001-3-1-2012-a2-2018/ | EN 13001-3-1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Cranes - General design - Part 3-1: Limit states and proof competence of steel structure | https://standardsdrift.com/standards/en-13001-3-1-2025/ | EN 13001-3-2:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | https://standardsdrift.com/standards/en-13001-3-2-2014/ | EN 13001-3-3:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts | https://standardsdrift.com/standards/en-13001-3-3-2014/ | EN 13001-3-5:2016 | Machinery | ended | 2017-06-09 | 2025-02-02 | | 2025-02-02 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks | https://standardsdrift.com/standards/en-13001-3-5-2016/ | EN 13001-3-5:2016+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks | https://standardsdrift.com/standards/en-13001-3-5-2016-a1-2021/ | EN 13001-3-5:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks | https://standardsdrift.com/standards/en-13001-3-5-2025/ | EN 13001-3-6:2018 | Machinery | ended | 2019-03-19 | 2023-10-11 | 2019/436 | 2023-10-11 | Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | https://standardsdrift.com/standards/en-13001-3-6-2018/ | EN 13001-3-6:2018+A1:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | https://standardsdrift.com/standards/en-13001-3-6-2018-a1-2021/ | EN 13015:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Maintenance for lifts and escalators - Rules for maintenance instructions | https://standardsdrift.com/standards/en-13015-2001-a1-2008/ | EN 13019:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Machines for road surface cleaning - Safety requirements | https://standardsdrift.com/standards/en-13019-2001-a1-2008/ | EN 13020:2004+A1:2010 | Machinery | ended | 2010-10-20 | 2016-05-31 | | 2016-05-31 | Road surface treatment machines - Safety requirements | https://standardsdrift.com/standards/en-13020-2004-a1-2010/ | EN 13020:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Road surface treatment machines - Safety requirements | https://standardsdrift.com/standards/en-13020-2015/ | EN 13021:2003+A1:2008 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Winter service machines - Safety requirements | https://standardsdrift.com/standards/en-13021-2003-a1-2008/ | EN 13023:2003+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 | https://standardsdrift.com/standards/en-13023-2003-a1-2010/ | EN 13035-11:2006+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines | https://standardsdrift.com/standards/en-13035-11-2006-a1-2010/ | EN 13035-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory | https://standardsdrift.com/standards/en-13035-1-2008/ | EN 13035-2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory | https://standardsdrift.com/standards/en-13035-2-2008/ | EN 13035-3:2003+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines | https://standardsdrift.com/standards/en-13035-3-2003-a1-2009/ | EN 13035-3:2003+A1:2009/AC:2010 EN 13035-4:2003+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables | https://standardsdrift.com/standards/en-13035-4-2003-a1-2009/ | EN 13035-5:2006+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking | https://standardsdrift.com/standards/en-13035-5-2006-a1-2009/ | EN 13035-6:2006+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out | https://standardsdrift.com/standards/en-13035-6-2006-a1-2009/ | EN 13035-7:2006+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass | https://standardsdrift.com/standards/en-13035-7-2006-a1-2009/ | EN 13035-9:2006+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations | https://standardsdrift.com/standards/en-13035-9-2006-a1-2010/ | EN 13042-1:2007+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder | https://standardsdrift.com/standards/en-13042-1-2007-a1-2009/ | EN 13042-2:2004+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding | https://standardsdrift.com/standards/en-13042-2-2004-a1-2009/ | EN 13042-3:2007+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines | https://standardsdrift.com/standards/en-13042-3-2007-a1-2009/ | EN 13042-5:2003+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses | https://standardsdrift.com/standards/en-13042-5-2003-a1-2009/ | EN 13059:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of industrial trucks - Test methods for measuring vibration | https://standardsdrift.com/standards/en-13059-2002-a1-2008/ | EN 13102:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ceramic machines - Safety - Loading and unloading of fine clay tiles | https://standardsdrift.com/standards/en-13102-2005-a1-2008/ | EN 13112:2002+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements | https://standardsdrift.com/standards/en-13112-2002-a1-2009/ | EN 13113:2002+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Tannery machines - Roller coating machines - Safety requirements | https://standardsdrift.com/standards/en-13113-2002-a1-2010/ | EN 13114:2002+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Tannery machines - Rotating process vessels - Safety requirements | https://standardsdrift.com/standards/en-13114-2002-a1-2009/ | EN 13118:2000+A1:2009 | Machinery | ended | 2009-12-18 | 2025-02-02 | | 2025-02-02 | Agricultural machinery - Potato harvesting equipment - Safety | https://standardsdrift.com/standards/en-13118-2000-a1-2009/ | EN 13120:2009 | Machinery | ended | 2009-09-08 | 2014-08-31 | | 2014-08-31 | Internal blinds - Performance requirements including safety | https://standardsdrift.com/standards/en-13120-2009/ | EN 13120:2009+A1:2014 | General Product Safety, Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | Internal blinds - Performance requirements including safety | https://standardsdrift.com/standards/en-13120-2009-a1-2014/ | EN 13120:2009+A1:2014/AC:2015 EN 13128:2001+A2:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machine tools - Milling machines (including boring machines) | https://standardsdrift.com/standards/en-13128-2001-a2-2009/ | EN 13128:2001+A2:2009/AC:2010 EN 13135-1:2003+A1:2010 | Machinery | ended | 2010-10-20 | 2013-11-28 | | 2013-11-28 | Cranes - Equipment - Part 1: Electrotechnical equipment | https://standardsdrift.com/standards/en-13135-1-2003-a1-2010/ | EN 13135-2:2004+A1:2010 | Machinery | ended | 2011-04-08 | 2013-11-28 | | 2013-11-28 | Cranes - Equipment - Part 2: Non-electrotechnical equipment | https://standardsdrift.com/standards/en-13135-2-2004-a1-2010/ | EN 13135:2013 | Machinery | ended | 2013-11-28 | 2020-09-19 | | 2020-09-19 | Cranes - Safety - Design - Requirements for equipment | https://standardsdrift.com/standards/en-13135-2013/ | EN 13135:2013+A1:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Cranes - Safety - Design - Requirements for equipment | https://standardsdrift.com/standards/en-13135-2013-a1-2018/ | EN 13140:2000+A1:2009 | Machinery | ended | 2009-12-18 | 2025-02-02 | | 2025-02-02 | Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety | https://standardsdrift.com/standards/en-13140-2000-a1-2009/ | EN 13155:2003+A2:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-03-13 | Cranes - Safety - Non-fixed load lifting attachments | https://standardsdrift.com/standards/en-13155-2003-a2-2009/ | EN 13155:2020+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/2015, 2026/546 | 2026-09-28 | Crane - Safety - Non-fixed load lifting attachments | https://standardsdrift.com/standards/en-13155-2020-a1-2025/ | EN 13155:2020+A1:2025/AC:2026 EN 13157:2004+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Cranes - Safety - Hand powered cranes | https://standardsdrift.com/standards/en-13157-2004-a1-2009/ | EN 13204:2004+A1:2012 | Machinery | ended | 2012-08-24 | 2017-11-30 | | 2017-11-30 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | https://standardsdrift.com/standards/en-13204-2004-a1-2012/ | EN 13204:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-03-13 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | https://standardsdrift.com/standards/en-13204-2016/ | EN 13204:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Powered rescue tools for fire and rescue service use - Safety and performance requirements | https://standardsdrift.com/standards/en-13204-2025/ | EN 13208:2003+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13208-2003-a1-2010/ | EN 13209-1:2004 | General Product Safety | cited | 2006-07-22 | | | 2024-12-13 | Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers | https://standardsdrift.com/standards/en-13209-1-2004/ | EN 13209-2:2015 | General Product Safety | cited | 2017-08-11 | | | 2024-12-13 | Child use and care articles - Baby carriers - Safety requirements and test methods - Part 2: Soft carrier | https://standardsdrift.com/standards/en-13209-2-2015/ | EN 13218:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2017-06-30 | | 2017-06-30 | Machine tools - Safety - Stationary grinding machines | https://standardsdrift.com/standards/en-13218-2002-a1-2008/ | EN 13219:2008 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Gymnastic equipment - Trampolines - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-13219-2008/ | EN 13241-1:2003+A1:2011 | Machinery | ended | 2011-11-18 | 2018-06-30 | | 2018-06-30 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics | https://standardsdrift.com/standards/en-13241-1-2003-a1-2011/ | EN 13241:2003+A2:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | 2019/1863 | 2026-09-28 | Industrial, commercial, garage doors and gates - Product standard, performance characteristics | https://standardsdrift.com/standards/en-13241-2003-a2-2016/ | EN 13288:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13288-2005-a1-2009/ | EN 13288:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13288-2025/ | EN 13289:2001+A1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13289-2001-a1-2013/ | EN 13319:2000 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods | https://standardsdrift.com/standards/en-13319-2000/ | EN 13355:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Coating plants - Combined booths - Safety requirements | https://standardsdrift.com/standards/en-13355-2004-a1-2009/ | EN 13367:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ceramic machines - Safety - Transfer platforms and cars | https://standardsdrift.com/standards/en-13367-2005-a1-2008/ | EN 13367:2005+A1:2008/AC:2009 EN 13378:2001+A1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Pasta processing plants - Pasta presses - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13378-2001-a1-2013/ | EN 13379:2001+A1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13379-2001-a1-2013/ | EN 13389:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13389-2005-a1-2009/ | EN 13390:2002+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13390-2002-a1-2009/ | EN 13411-1:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings | https://standardsdrift.com/standards/en-13411-1-2002-a1-2008/ | EN 13411-2:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings | https://standardsdrift.com/standards/en-13411-2-2001-a1-2008/ | EN 13411-3:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing | https://standardsdrift.com/standards/en-13411-3-2004-a1-2008/ | EN 13411-4:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2011-09-30 | | 2011-09-30 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | https://standardsdrift.com/standards/en-13411-4-2002-a1-2008/ | EN 13411-4:2011 | Machinery | ended | 2011-07-20 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | https://standardsdrift.com/standards/en-13411-4-2011/ | EN 13411-5:2003+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips | https://standardsdrift.com/standards/en-13411-5-2003-a1-2008/ | EN 13411-6:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket | https://standardsdrift.com/standards/en-13411-6-2004-a1-2008/ | EN 13411-7:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket | https://standardsdrift.com/standards/en-13411-7-2006-a1-2008/ | EN 13411-8:2011 | Machinery | ended | 2011-11-18 | 2023-04-15 | | 2023-04-15 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | https://standardsdrift.com/standards/en-13411-8-2011/ | EN 13414-1:2003+A2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service | https://standardsdrift.com/standards/en-13414-1-2003-a2-2008/ | EN 13414-2:2003+A2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer | https://standardsdrift.com/standards/en-13414-2-2003-a2-2008/ | EN 13414-3:2003+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings | https://standardsdrift.com/standards/en-13414-3-2003-a1-2008/ | EN 13418:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2013-11-30 | | 2013-11-30 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements | https://standardsdrift.com/standards/en-13418-2004-a1-2008/ | EN 13418:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements | https://standardsdrift.com/standards/en-13418-2013/ | EN 13448:2001+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Inter-row mowing units - Safety | https://standardsdrift.com/standards/en-13448-2001-a1-2009/ | EN 13457:2004+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements | https://standardsdrift.com/standards/en-13457-2004-a1-2010/ | EN 13478:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2016-09-09 | | 2016-09-09 | Safety of machinery - Fire prevention and protection | https://standardsdrift.com/standards/en-13478-2001-a1-2008/ | EN 13490:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration | https://standardsdrift.com/standards/en-13490-2001-a1-2008/ | EN 13524:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2014-08-31 | | 2014-08-31 | Highway maintenance machines - Safety requirements | https://standardsdrift.com/standards/en-13524-2003-a1-2009/ | EN 13524:2003+A2:2014 | Machinery | ended | 2014-07-11 | 2025-02-02 | | 2025-02-02 | Highway maintenance machines - Safety requirements | https://standardsdrift.com/standards/en-13524-2003-a2-2014/ | EN 13525:2005+A2:2009 | Machinery | ended | 2009-12-18 | 2015-01-08 | | 2015-01-08 | Forestry machinery - Wood chippers - Safety | https://standardsdrift.com/standards/en-13525-2005-a2-2009/ | EN 13525:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Forestry machinery - Wood chippers - Safety | https://standardsdrift.com/standards/en-13525-2020/ | EN 13531:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) | https://standardsdrift.com/standards/en-13531-2001-a1-2008/ | EN 13534:2006+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Curing injection machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13534-2006-a1-2010/ | EN 13557:2003+A2:2008 | Machinery | ended | 2009-09-08 | 2026-03-16 | | 2026-03-16 | Cranes - Controls and control stations | https://standardsdrift.com/standards/en-13557-2003-a2-2008/ | EN 13557:2024 | Machinery | ceasing | 2024-09-16 | 2027-01-20 | 2024/2408 | 2026-09-28 | Cranes - Control devices and control stations | https://standardsdrift.com/standards/en-13557-2024/ | EN 13561:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2017-02-28 | | 2017-02-28 | External blinds - Performance requirements including safety | https://standardsdrift.com/standards/en-13561-2004-a1-2008/ | EN 13561:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | External blinds and awnings - Performance requirements including safety | https://standardsdrift.com/standards/en-13561-2015/ | EN 13561:2015/AC:2016 EN 13570:2005+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Mixing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13570-2005-a1-2010/ | EN 13586:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Cranes - Access | https://standardsdrift.com/standards/en-13586-2004-a1-2008/ | EN 13586:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Cranes - Access | https://standardsdrift.com/standards/en-13586-2020/ | EN 13591:2005+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13591-2005-a1-2009/ | EN 13617-1:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2012-11-30 | | 2012-11-30 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | https://standardsdrift.com/standards/en-13617-1-2004-a1-2009/ | EN 13617-1:2012 | Machinery | ended | 2012-08-24 | 2025-02-02 | | 2025-02-02 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | https://standardsdrift.com/standards/en-13617-1-2012/ | EN 13617-1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | https://standardsdrift.com/standards/en-13617-1-2021/ | EN 13621:2004+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Salad dryers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13621-2004-a1-2010/ | EN 13659:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2017-02-28 | | 2017-02-28 | Shutters - Performance requirements including safety | https://standardsdrift.com/standards/en-13659-2004-a1-2008/ | EN 13659:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Shutters and external venetian blinds - Performance requirements including safety | https://standardsdrift.com/standards/en-13659-2015/ | EN 13675:2004+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment | https://standardsdrift.com/standards/en-13675-2004-a1-2010/ | EN 13683:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2011-07-20 | | 2011-07-20 | Garden equipment - Integrally powered shredders/chippers - Safety | https://standardsdrift.com/standards/en-13683-2003-a1-2009/ | EN 13683:2003+A2:2011 | Machinery | ceasing | 2011-07-20 | 2027-01-20 | | 2026-09-28 | Garden equipment - Integrally powered shredders/chippers - Safety | https://standardsdrift.com/standards/en-13683-2003-a2-2011/ | EN 13683:2003+A2:2011/AC:2013 EN 13684:2004+A2:2009 | Machinery | ended | 2009-12-18 | 2010-06-30 | | 2010-06-30 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | https://standardsdrift.com/standards/en-13684-2004-a2-2009/ | EN 13684:2004+A3:2009 | Machinery | ended | 2010-05-26 | 2020-09-19 | | 2020-09-19 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | https://standardsdrift.com/standards/en-13684-2004-a3-2009/ | EN 13684:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2025-08-14 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | https://standardsdrift.com/standards/en-13684-2018/ | EN 13684:2018+A1:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | https://standardsdrift.com/standards/en-13684-2018-a1-2024/ | EN 13731:2007 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Lifting bag systems for fire and rescue service use - Safety and performance requirements | https://standardsdrift.com/standards/en-13731-2007/ | EN 13732:2002+A2:2009 | Machinery | ended | 2009-09-08 | 2014-01-31 | | 2014-01-31 | Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene | https://standardsdrift.com/standards/en-13732-2002-a2-2009/ | EN 13732:2013 | Machinery | ended | 2013-11-28 | 2025-02-02 | | 2025-02-02 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene | https://standardsdrift.com/standards/en-13732-2013/ | EN 13732:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene | https://standardsdrift.com/standards/en-13732-2022/ | EN 13736:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2021-09-19 | | 2021-09-19 | Safety of machine tools - Pneumatic presses | https://standardsdrift.com/standards/en-13736-2003-a1-2009/ | EN 1374:2000+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Silos stationary unloaders for round silos - Safety | https://standardsdrift.com/standards/en-1374-2000-a1-2010/ | EN 13852-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-03-13 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes | https://standardsdrift.com/standards/en-13852-1-2013/ | EN 13852-1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes | https://standardsdrift.com/standards/en-13852-1-2025/ | EN 13852-3:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Cranes - Offshore cranes - Part 3: Light offshore cranes | https://standardsdrift.com/standards/en-13852-3-2021/ | EN 13862:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Floor cutting-off machines - Safety | https://standardsdrift.com/standards/en-13862-2001-a1-2009/ | EN 13862:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Floor cutting-off machines - Safety | https://standardsdrift.com/standards/en-13862-2021/ | EN 13869:2016 | General Product Safety | cited | 2017-08-11 | | | 2024-12-13 | Lighters - Child safety requirements for lighters - Safety requirements and test methods | https://standardsdrift.com/standards/en-13869-2016/ | EN 13870:2005+A1:2010 | Machinery | ended | 2010-10-20 | 2016-03-31 | | 2016-03-31 | Food processing machinery - Chop cutting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13870-2005-a1-2010/ | EN 13870:2015 | Machinery | ended | 2016-01-15 | 2025-02-02 | | 2025-02-02 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13870-2015/ | EN 13870:2015+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13870-2015-a1-2021/ | EN 13871:2005+A1:2010 | Machinery | ended | 2010-10-20 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13871-2005-a1-2010/ | EN 13871:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13871-2014/ | EN 13885:2005+A1:2010 | Machinery | ended | 2010-10-20 | 2025-02-02 | | 2025-02-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13885-2005-a1-2010/ | EN 13885:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Food processing machinery - Clipping machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13885-2022/ | EN 13886:2005+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13886-2005-a1-2010/ | EN 13889:2003+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety | https://standardsdrift.com/standards/en-13889-2003-a1-2008/ | EN 13898:2003+A1:2009 | Machinery | ended | 2009-09-08 | 2018-06-30 | | 2018-06-30 | Machine tools - Safety - Sawing machines for cold metal | https://standardsdrift.com/standards/en-13898-2003-a1-2009/ | EN 13898:2003+A1:2009/AC:2010 EN 13899:2003 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Roller sports equipment - Roller skates - Safety requirements and test methods | https://standardsdrift.com/standards/en-13899-2003/ | EN 13951:2003+A1:2008 | Machinery | ended | 2009-09-08 | 2012-10-31 | | 2012-10-31 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use | https://standardsdrift.com/standards/en-13951-2003-a1-2008/ | EN 13951:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use | https://standardsdrift.com/standards/en-13951-2012/ | EN 13954:2005+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Bread slicers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-13954-2005-a1-2010/ | EN 13977:2011 | Machinery | ceasing | 2011-07-20 | 2027-01-20 | | 2026-09-28 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance | https://standardsdrift.com/standards/en-13977-2011/ | EN 13985:2003+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machine tools - Safety - Guillotine shears | https://standardsdrift.com/standards/en-13985-2003-a1-2009/ | EN 1398:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Dock levellers - Safety requirements | https://standardsdrift.com/standards/en-1398-2009/ | EN 1400:2013+A2:2018 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods | https://standardsdrift.com/standards/en-1400-2013-a2-2018/ | EN 14010:2003+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages | https://standardsdrift.com/standards/en-14010-2003-a1-2009/ | EN 14017:2005+A1:2008 | Machinery | ended | 2009-09-08 | 2010-01-31 | | 2010-01-31 | Agricultural and forestry machinery - Solid fertilizer distributors - Safety | https://standardsdrift.com/standards/en-14017-2005-a1-2008/ | EN 14017:2005+A2:2009 | Machinery | ended | 2009-12-18 | 2020-09-19 | | 2020-09-19 | Agricultural and forestry machinery - Solid fertilizer distributors - Safety | https://standardsdrift.com/standards/en-14017-2005-a2-2009/ | EN 14018:2005+A1:2009 | Machinery | ended | 2009-12-18 | 2021-10-02 | | 2021-10-02 | Agricultural and forestry machinery - Seed drills - Safety | https://standardsdrift.com/standards/en-14018-2005-a1-2009/ | EN 14033-3:2009 | Machinery | ended | 2010-05-26 | 2018-06-30 | | 2018-06-30 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | https://standardsdrift.com/standards/en-14033-3-2009/ | EN 14033-3:2009+A1:2011 | Machinery | ended | 2012-02-29 | 2018-06-30 | | 2018-06-30 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | https://standardsdrift.com/standards/en-14033-3-2009-a1-2011/ | EN 14033-3:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | https://standardsdrift.com/standards/en-14033-3-2017/ | EN 14033-4:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail | https://standardsdrift.com/standards/en-14033-4-2019/ | EN 14043:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2014-07-31 | | 2014-07-31 | High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods | https://standardsdrift.com/standards/en-14043-2005-a1-2009/ | EN 14043:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods | https://standardsdrift.com/standards/en-14043-2014/ | EN 14044:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2014-07-31 | | 2014-07-31 | High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods | https://standardsdrift.com/standards/en-14044-2005-a1-2009/ | EN 14044:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods | https://standardsdrift.com/standards/en-14044-2014/ | EN 14059:2002 | General Product Safety | cited | 2004-04-24 | | | 2024-12-13 | Decorative oil lamps - Safety requirements and test methods | https://standardsdrift.com/standards/en-14059-2002/ | EN 14070:2003+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machine tools - Transfer and special-purpose machines | https://standardsdrift.com/standards/en-14070-2003-a1-2009/ | EN 14070:2003+A1:2009/AC:2010 EN 1417:1996+A1:2008 | Machinery | ended | 2009-09-08 | 2016-12-31 | | 2016-12-31 | Plastics and rubber machines - Two roll mills - Safety requirements | https://standardsdrift.com/standards/en-1417-1996-a1-2008/ | EN 1417:1996+A1:2008/AC:2009 EN 1417:2014 | Machinery | ended | 2016-01-15 | 2025-11-15 | | 2025-11-15 | Plastics and rubber machines - Two-roll mills - Safety requirements | https://standardsdrift.com/standards/en-1417-2014/ | EN 1417:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Plastics and rubber machines - Two-roll mills - Safety requirements | https://standardsdrift.com/standards/en-1417-2023/ | EN 14238:2004+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Cranes - Manually controlled load manipulating devices | https://standardsdrift.com/standards/en-14238-2004-a1-2009/ | EN 14344:2004 | General Product Safety | ended | 2005-10-15 | 2026-03-13 | | 2026-04-27 | Child use and care articles - Child seats for cycles - Safety requirements and test methods | https://standardsdrift.com/standards/en-14344-2004/ | EN 14344:2022 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Child care articles - Child seats for cycles - Safety requirements and test methods | https://standardsdrift.com/standards/en-14344-2022/ | EN 14350-1:2004 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests | https://standardsdrift.com/standards/en-14350-1-2004/ | EN 14439:2006+A2:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-03-13 | Cranes - Safety - Tower cranes | https://standardsdrift.com/standards/en-14439-2006-a2-2009/ | EN 14439:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/2015, 2026/546 | 2026-09-28 | Cranes - Tower cranes | https://standardsdrift.com/standards/en-14439-2025/ | EN 14439:2025/AC:2026 EN 14462:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | https://standardsdrift.com/standards/en-14462-2005-a1-2009/ | EN 14466:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests | https://standardsdrift.com/standards/en-14466-2005-a1-2008/ | EN 14492-1:2006+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Cranes - Power driven winches and hoists - Part 1: Power driven winches | https://standardsdrift.com/standards/en-14492-1-2006-a1-2009/ | EN 14492-1:2006+A1:2009/AC:2010 EN 14492-2:2006+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Cranes - Power driven winches and hoists - Part 2: Power driven hoists | https://standardsdrift.com/standards/en-14492-2-2006-a1-2009/ | EN 14492-2:2006+A1:2009/AC:2010 EN 14502-2:2005+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations | https://standardsdrift.com/standards/en-14502-2-2005-a1-2008/ | EN 1459-1:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-03-13 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks | https://standardsdrift.com/standards/en-1459-1-2017/ | EN 1459-1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks | https://standardsdrift.com/standards/en-1459-1-2025/ | EN 1459-2:2015 | Machinery | ended | 2016-01-15 | 2021-10-02 | | 2021-10-02 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | https://standardsdrift.com/standards/en-1459-2-2015/ | EN 1459-2:2015+A1:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | https://standardsdrift.com/standards/en-1459-2-2015-a1-2018/ | EN 1459-4:2020+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads | https://standardsdrift.com/standards/en-1459-4-2020-a1-2025/ | EN 1459-5:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-03-13 | Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | https://standardsdrift.com/standards/en-1459-5-2020/ | EN 1459-5:2020+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | https://standardsdrift.com/standards/en-1459-5-2020-a1-2025/ | EN 1459:1998+A3:2012 | Machinery | ended | 2012-03-23 | 2018-09-30 | | 2018-09-30 | Safety of industrial trucks - Self-propelled variable reach trucks | https://standardsdrift.com/standards/en-1459-1998-a3-2012/ | EN 14655:2005+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Baguette slicers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-14655-2005-a1-2010/ | EN 14656:2006+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals | https://standardsdrift.com/standards/en-14656-2006-a1-2010/ | EN 14658:2005+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining | https://standardsdrift.com/standards/en-14658-2005-a1-2010/ | EN 1466:2014 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Child use and care articles - Carry cots and stands - Safety requirements and test methods | https://standardsdrift.com/standards/en-1466-2014/ | EN 1466:2014/AC:2015 EN 14673:2006+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals | https://standardsdrift.com/standards/en-14673-2006-a1-2010/ | EN 14677:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel | https://standardsdrift.com/standards/en-14677-2008/ | EN 14681:2006+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces | https://standardsdrift.com/standards/en-14681-2006-a1-2010/ | EN 14682:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Safety of children's clothing - Cords and drawstrings on children's clothing - Specifications | https://standardsdrift.com/standards/en-14682-2014/ | EN 14710-1:2005+A2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements | https://standardsdrift.com/standards/en-14710-1-2005-a2-2008/ | EN 14710-2:2005+A2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements | https://standardsdrift.com/standards/en-14710-2-2005-a2-2008/ | EN 14753:2007 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel | https://standardsdrift.com/standards/en-14753-2007/ | EN 14861:2004+A1:2009 | Machinery | ended | 2009-12-18 | 2012-05-31 | | 2012-05-31 | Forest machinery - Self propelled machinery - Safety requirements | https://standardsdrift.com/standards/en-14861-2004-a1-2009/ | EN 14886:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements | https://standardsdrift.com/standards/en-14886-2008/ | EN 14910:2007+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety | https://standardsdrift.com/standards/en-14910-2007-a1-2009/ | EN 1492-1:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use | https://standardsdrift.com/standards/en-1492-1-2000-a1-2008/ | EN 1492-2:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use | https://standardsdrift.com/standards/en-1492-2-2000-a1-2008/ | EN 1492-4:2004+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes | https://standardsdrift.com/standards/en-1492-4-2004-a1-2008/ | EN 14930:2007+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces | https://standardsdrift.com/standards/en-14930-2007-a1-2009/ | EN 1493:1998+A1:2008 | Machinery | ended | 2009-09-08 | 2011-04-08 | | 2011-04-08 | Vehicle lifts | https://standardsdrift.com/standards/en-1493-1998-a1-2008/ | EN 1493:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Vehicle lifts | https://standardsdrift.com/standards/en-1493-2010/ | EN 1494:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mobile or movable jacks and associated lifting equipment | https://standardsdrift.com/standards/en-1494-2000-a1-2008/ | EN 14957:2006+A1:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements | https://standardsdrift.com/standards/en-14957-2006-a1-2010/ | EN 14958:2006+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements | https://standardsdrift.com/standards/en-14958-2006-a1-2009/ | EN 1495:1997+A2:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Lifting platforms - Mast climbing work platforms | https://standardsdrift.com/standards/en-1495-1997-a2-2009/ | EN 1495:1997+A2:2009/AC:2010 EN 14973:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2016-05-31 | | 2016-05-31 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements | https://standardsdrift.com/standards/en-14973-2006-a1-2008/ | EN 14973:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements | https://standardsdrift.com/standards/en-14973-2015/ | EN 14985:2012 | Machinery | ceasing | 2012-03-23 | 2027-01-20 | | 2026-09-28 | Cranes - Slewing jib cranes | https://standardsdrift.com/standards/en-14985-2012/ | EN 14988:2017+A1:2020 | General Product Safety | ceasing | 2022-08-16 | 2027-10-27 | 2022/1401 | 2026-04-27 | Children's high chairs - Requirements and test methods | https://standardsdrift.com/standards/en-14988-2017-a1-2020/ | EN 14988:2017+A2:2024 | General Product Safety | cited | 2026-04-27 | | 2026/901 | 2026-04-27 | Children's high chairs - Requirements and test methods | https://standardsdrift.com/standards/en-14988-2017-a2-2024/ | EN 15000:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters | https://standardsdrift.com/standards/en-15000-2008/ | EN 1501-1:1998+A2:2009 | Machinery | ended | 2009-12-29 | 2012-02-29 | | 2012-02-29 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-1-1998-a2-2009/ | EN 1501-1:2011 | Machinery | ended | 2011-11-18 | 2016-02-29 | | 2016-02-29 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-1-2011/ | EN 1501-1:2011+A1:2015 | Machinery | ended | 2016-01-15 | 2023-10-11 | | 2023-10-11 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-1-2011-a1-2015/ | EN 1501-1:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-1-2021/ | EN 1501-2:2005+A1:2009 | Machinery | ended | 2009-12-29 | 2023-10-11 | | 2023-10-11 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-2-2005-a1-2009/ | EN 1501-2:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-2-2021/ | EN 1501-3:2008 | Machinery | ended | 2009-09-08 | 2023-10-11 | | 2023-10-11 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-3-2008/ | EN 1501-3:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | https://standardsdrift.com/standards/en-1501-3-2021/ | EN 1501-4:2007 | Machinery | ended | 2009-09-08 | 2025-11-15 | | 2025-11-15 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | https://standardsdrift.com/standards/en-1501-4-2007/ | EN 1501-4:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | https://standardsdrift.com/standards/en-1501-4-2023/ | EN 1501-5:2011 | Machinery | ended | 2011-11-18 | 2023-10-11 | | 2023-10-11 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | https://standardsdrift.com/standards/en-1501-5-2011/ | EN 1501-5:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621, 2026/546 | 2026-09-28 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | https://standardsdrift.com/standards/en-1501-5-2021/ | EN 15011:2011 | Machinery | ended | 2011-07-20 | 2014-08-31 | | 2014-08-31 | Cranes - Bridge and gantry cranes | https://standardsdrift.com/standards/en-15011-2011/ | EN 15011:2011+A1:2014 | Machinery | ended | 2014-07-11 | 2023-04-15 | | 2023-04-15 | Cranes - Bridge and gantry cranes | https://standardsdrift.com/standards/en-15011-2011-a1-2014/ | EN 15011:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Cranes - Bridge and gantry cranes | https://standardsdrift.com/standards/en-15011-2020/ | EN 15027:2007+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Transportable wall saw and wire saw equipment for job site - Safety | https://standardsdrift.com/standards/en-15027-2007-a1-2009/ | EN 15056:2006+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Cranes - Requirements for container handling spreaders | https://standardsdrift.com/standards/en-15056-2006-a1-2009/ | EN 15059:2009 | Machinery | ended | 2009-09-08 | 2016-02-29 | | 2016-02-29 | Snow grooming equipment - Safety requirements | https://standardsdrift.com/standards/en-15059-2009/ | EN 15059:2009+A1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Snow grooming equipment - Safety requirements | https://standardsdrift.com/standards/en-15059-2009-a1-2015/ | EN 15061:2007+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for strip processing line machinery and equipment | https://standardsdrift.com/standards/en-15061-2007-a1-2008/ | EN 15067:2007 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements | https://standardsdrift.com/standards/en-15067-2007/ | EN 15093:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of Machinery - Safety requirements for hot flat rolling mills | https://standardsdrift.com/standards/en-15093-2008/ | EN 15094:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of Machinery - Safety requirements for cold flat rolling mills | https://standardsdrift.com/standards/en-15094-2008/ | EN 15095:2007+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements | https://standardsdrift.com/standards/en-15095-2007-a1-2008/ | EN 15162:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws | https://standardsdrift.com/standards/en-15162-2008/ | EN 15163-1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws | https://standardsdrift.com/standards/en-15163-1-2022/ | EN 15163-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws | https://standardsdrift.com/standards/en-15163-2-2022/ | EN 15163:2008 | Machinery | ended | 2009-09-08 | 2024-02-02 | | 2024-02-02 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws | https://standardsdrift.com/standards/en-15163-2008/ | EN 15164:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines | https://standardsdrift.com/standards/en-15164-2008/ | EN 15166:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements | https://standardsdrift.com/standards/en-15166-2008/ | EN 15180:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Food processing machinery - Food depositors - Safety and hygiene requirements | https://standardsdrift.com/standards/en-15180-2025/ | EN 15194:2017 | Machinery | ended | 2019-03-19 | 2026-05-15 | 2019/436, 2023/69 | 2026-05-15 | Cycles - Electrically power assisted cycles - EPAC Bicycles | https://standardsdrift.com/standards/en-15194-2017/ | EN 15194:2017+A1:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Cycles - Electrically power assisted cycles - EPAC Bicycles | https://standardsdrift.com/standards/en-15194-2017-a1-2023/ | EN 15268:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies | https://standardsdrift.com/standards/en-15268-2008/ | EN 1526:1997+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of industrial trucks - Additional requirements for automated functions on trucks | https://standardsdrift.com/standards/en-1526-1997-a1-2008/ | EN 1539:2009 | Machinery | ended | 2010-05-26 | 2016-05-13 | | 2016-05-13 | Dryers and ovens, in which flammable substances are released - Safety requirements | https://standardsdrift.com/standards/en-1539-2009/ | EN 1539:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Dryers and ovens, in which flammable substances are released - Safety requirements | https://standardsdrift.com/standards/en-1539-2015/ | EN 1547:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment | https://standardsdrift.com/standards/en-1547-2001-a1-2009/ | EN 15503:2009 | Machinery | ended | 2010-05-26 | 2014-04-30 | | 2014-04-30 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | https://standardsdrift.com/standards/en-15503-2009/ | EN 15503:2009+A1:2013 | Machinery | ended | 2014-04-11 | 2017-06-30 | | 2017-06-30 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | https://standardsdrift.com/standards/en-15503-2009-a1-2013/ | EN 15503:2009+A2:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | https://standardsdrift.com/standards/en-15503-2009-a2-2015/ | EN 1550:1997+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machine-tools safety - Safety requirements for the design and construction of work holding chucks | https://standardsdrift.com/standards/en-1550-1997-a1-2008/ | EN 1554:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Conveyor belts - Drum friction testing | https://standardsdrift.com/standards/en-1554-2012/ | EN 15571:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines | https://standardsdrift.com/standards/en-15571-2020/ | EN 15572:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines | https://standardsdrift.com/standards/en-15572-2015/ | EN 15695-1:2009 | Machinery | ended | 2010-05-26 | 2018-06-30 | | 2018-06-30 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures | https://standardsdrift.com/standards/en-15695-1-2009/ | EN 15695-1:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures | https://standardsdrift.com/standards/en-15695-1-2017/ | EN 15695-2:2009 | Machinery | ended | 2010-05-26 | 2018-06-30 | | 2018-06-30 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures | https://standardsdrift.com/standards/en-15695-2-2009/ | EN 15695-2:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures | https://standardsdrift.com/standards/en-15695-2-2017/ | EN 1570-1:2011 | Machinery | ended | 2012-02-29 | 2016-05-13 | | 2016-05-13 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings | https://standardsdrift.com/standards/en-1570-1-2011/ | EN 1570-1:2011+A1:2014 | Machinery | ended | 2016-05-13 | 2026-03-16 | | 2026-03-16 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings | https://standardsdrift.com/standards/en-1570-1-2011-a1-2014/ | EN 1570-1:2024 | Machinery | ceasing | 2024-09-16 | 2027-01-20 | 2024/2408 | 2026-09-28 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landing | https://standardsdrift.com/standards/en-1570-1-2024/ | EN 1570-2:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s | https://standardsdrift.com/standards/en-1570-2-2016/ | EN 15700:2011 | Machinery | ended | 2012-02-29 | 2025-11-15 | | 2025-11-15 | Safety for conveyor belts for winter sport or leisure use | https://standardsdrift.com/standards/en-15700-2011/ | EN 15700:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Safety for conveyor belts for winter sport or tourist use | https://standardsdrift.com/standards/en-15700-2023/ | EN 1570:1998+A2:2009 | Machinery | ended | 2009-12-18 | 2012-04-30 | | 2012-04-30 | Safety requirements for lifting tables | https://standardsdrift.com/standards/en-1570-1998-a2-2009/ | EN 15746-2:2010 | Machinery | ended | 2010-10-20 | 2012-04-30 | | 2012-04-30 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements | https://standardsdrift.com/standards/en-15746-2-2010/ | EN 15746-2:2010+A1:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements | https://standardsdrift.com/standards/en-15746-2-2010-a1-2011/ | EN 15774:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements | https://standardsdrift.com/standards/en-15774-2010/ | EN 15811:2009 | Machinery | ended | 2009-12-18 | 2016-02-29 | | 2016-02-29 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified) | https://standardsdrift.com/standards/en-15811-2009/ | EN 15811:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified) | https://standardsdrift.com/standards/en-15811-2014/ | EN 15830:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Rough-terrain variable reach trucks - Visibility - Test methods and verification | https://standardsdrift.com/standards/en-15830-2012/ | EN 15861:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Smokehouses - Safety and hygiene requirements | https://standardsdrift.com/standards/en-15861-2012/ | EN 15895:2011 | Machinery | ended | 2011-11-18 | 2020-09-19 | | 2020-09-19 | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | https://standardsdrift.com/standards/en-15895-2011/ | EN 15895:2011+A1:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-03-13 | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | https://standardsdrift.com/standards/en-15895-2011-a1-2018/ | EN 15895:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Powder actuated hand-held fixing and hard marking tools - Safety requirements | https://standardsdrift.com/standards/en-15895-2025/ | EN 15949:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills | https://standardsdrift.com/standards/en-15949-2012/ | EN 15954-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-03-13 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements | https://standardsdrift.com/standards/en-15954-2-2013/ | EN 15955-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-03-13 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements | https://standardsdrift.com/standards/en-15955-2-2013/ | EN 15955-2:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Railway applications - Infrastructure - Demountable machines, trailers and associated equipment - Part 2: General safety requirements | https://standardsdrift.com/standards/en-15955-2-2025/ | EN 15967:2011 | Machinery | ended | 2011-11-18 | 2025-02-02 | | 2025-02-02 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | https://standardsdrift.com/standards/en-15967-2011/ | EN 15967:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | https://standardsdrift.com/standards/en-15967-2022/ | EN 15997:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | 2024/1256 | 2026-09-28 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods | https://standardsdrift.com/standards/en-15997-2011/ | EN 15997:2011/AC:2012 EN 16005:2012 | Machinery | ended | 2013-04-05 | 2026-03-16 | | 2026-03-16 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods | https://standardsdrift.com/standards/en-16005-2012/ | EN 16005:2012/AC:2015 EN 16005:2023+A1:2024 | Machinery | ceasing | 2024-09-16 | 2027-01-20 | 2024/2408 | 2026-09-28 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods | https://standardsdrift.com/standards/en-16005-2023-a1-2024/ | EN 16029:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods | https://standardsdrift.com/standards/en-16029-2012/ | EN 1612-1:1997+A1:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units | https://standardsdrift.com/standards/en-1612-1-1997-a1-2008/ | EN 16120:2012+A2:2016 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Child use and care articles - Chair mounted seat | https://standardsdrift.com/standards/en-16120-2012-a2-2016/ | EN 1612:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements | https://standardsdrift.com/standards/en-1612-2019/ | EN 16156:2010 | General Product Safety | ceasing | 2011-11-17 | 2027-10-27 | | 2026-04-27 | Cigarettes - Assessment of the ignition propensity - Safety requirement | https://standardsdrift.com/standards/en-16156-2010/ | EN 16156:2024 | General Product Safety | cited | 2026-04-27 | | 2026/901 | 2026-04-27 | Cigarettes - Assessment of the ignition propensity - Safety requirement | https://standardsdrift.com/standards/en-16156-2024/ | EN 16191:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Tunnelling machinery - Safety requirements | https://standardsdrift.com/standards/en-16191-2014/ | EN 16203:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks | https://standardsdrift.com/standards/en-16203-2014/ | EN 16228-1:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 1: Common requirements | https://standardsdrift.com/standards/en-16228-1-2014/ | EN 16228-1:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 1: Common requirements | https://standardsdrift.com/standards/en-16228-1-2014-a1-2021/ | EN 16228-2:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining | https://standardsdrift.com/standards/en-16228-2-2014/ | EN 16228-2:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining | https://standardsdrift.com/standards/en-16228-2-2014-a1-2021/ | EN 16228-3:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) | https://standardsdrift.com/standards/en-16228-3-2014/ | EN 16228-3:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) | https://standardsdrift.com/standards/en-16228-3-2014-a1-2021/ | EN 16228-4:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment | https://standardsdrift.com/standards/en-16228-4-2014/ | EN 16228-4:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment | https://standardsdrift.com/standards/en-16228-4-2014-a1-2021/ | EN 16228-5:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment | https://standardsdrift.com/standards/en-16228-5-2014/ | EN 16228-5:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment | https://standardsdrift.com/standards/en-16228-5-2014-a1-2021/ | EN 16228-6:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment | https://standardsdrift.com/standards/en-16228-6-2014/ | EN 16228-6:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment | https://standardsdrift.com/standards/en-16228-6-2014-a1-2021/ | EN 16228-7:2014 | Machinery | ended | 2015-02-13 | 2025-02-02 | | 2025-02-02 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment | https://standardsdrift.com/standards/en-16228-7-2014/ | EN 16228-7:2014+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment | https://standardsdrift.com/standards/en-16228-7-2014-a1-2021/ | EN 16230-1:2013 | Machinery | ended | 2013-11-28 | 2016-02-29 | | 2016-02-29 | Leisure karts - Part 1: Safety requirements and test methods for karts | https://standardsdrift.com/standards/en-16230-1-2013/ | EN 16230-1:2013+A1:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Leisure karts - Part 1: Safety requirements and test methods for karts | https://standardsdrift.com/standards/en-16230-1-2013-a1-2014/ | EN 16246:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Backhoes - Safety | https://standardsdrift.com/standards/en-16246-2012/ | EN 16252:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements | https://standardsdrift.com/standards/en-16252-2012/ | EN 16281:2013 | General Product Safety | cited | 2014-07-11 | | | 2024-12-13 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods | https://standardsdrift.com/standards/en-16281-2013/ | EN 16307-1:2013 | Machinery | ended | 2013-04-05 | 2016-02-29 | | 2016-02-29 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | https://standardsdrift.com/standards/en-16307-1-2013/ | EN 16307-1:2013+A1:2015 | Machinery | ended | 2016-01-15 | 2023-04-15 | | 2023-04-15 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | https://standardsdrift.com/standards/en-16307-1-2013-a1-2015/ | EN 16307-1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | https://standardsdrift.com/standards/en-16307-1-2020/ | EN 16307-5:2013 | Machinery | ended | 2014-07-11 | 2025-11-15 | | 2025-11-15 | Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks | https://standardsdrift.com/standards/en-16307-5-2013/ | EN 16307-5:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks | https://standardsdrift.com/standards/en-16307-5-2023/ | EN 16307-6:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers | https://standardsdrift.com/standards/en-16307-6-2014/ | EN 16327:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) | https://standardsdrift.com/standards/en-16327-2014/ | EN 16433:2014 | General Product Safety | cited | 2014-10-10 | | | 2024-12-13 | Internal blinds - Protection from strangulation hazards - Test methods | https://standardsdrift.com/standards/en-16433-2014/ | EN 16434:2014 | General Product Safety | cited | 2014-10-10 | | | 2024-12-13 | Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices | https://standardsdrift.com/standards/en-16434-2014/ | EN 16474:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Tyre curing machines - Safety requirements | https://standardsdrift.com/standards/en-16474-2015/ | EN 16474:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Plastics and rubber machines - Tyre curing machines - Safety requirements | https://standardsdrift.com/standards/en-16474-2025/ | EN 16486:2014 | Machinery | ended | 2016-01-15 | 2023-04-15 | | 2023-04-15 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | https://standardsdrift.com/standards/en-16486-2014/ | EN 16486:2014+A1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | https://standardsdrift.com/standards/en-16486-2014-a1-2020/ | EN 16500:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements | https://standardsdrift.com/standards/en-16500-2014/ | EN 16517:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural and forestry machinery - Mobile yarders for timber logging - Safety | https://standardsdrift.com/standards/en-16517-2021/ | EN 1651:1999 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Paragliding equipment - Harnesses - Safety requirements and strength tests | https://standardsdrift.com/standards/en-1651-1999/ | EN 16564:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions | https://standardsdrift.com/standards/en-16564-2020/ | EN 16590-1:2014 | Machinery | ended | 2015-02-13 | 2025-11-15 | | 2025-11-15 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) | https://standardsdrift.com/standards/en-16590-1-2014/ | EN 16590-2:2014 | Machinery | ended | 2015-02-13 | 2025-11-15 | | 2025-11-15 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) | https://standardsdrift.com/standards/en-16590-2-2014/ | EN 16590-3:2014 | Machinery | ended | 2015-02-13 | 2025-11-15 | | 2025-11-15 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) | https://standardsdrift.com/standards/en-16590-3-2014/ | EN 16590-4:2014 | Machinery | ended | 2015-02-13 | 2025-11-15 | | 2025-11-15 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) | https://standardsdrift.com/standards/en-16590-4-2014/ | EN 16712-4:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16 | https://standardsdrift.com/standards/en-16712-4-2018/ | EN 16719:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Transport platforms | https://standardsdrift.com/standards/en-16719-2018/ | EN 1672-2:2005+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements | https://standardsdrift.com/standards/en-1672-2-2005-a1-2009/ | EN 1673:2000+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1673-2000-a1-2009/ | EN 16743:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-16743-2016/ | EN 1674:2000+A1:2009 | Machinery | ended | 2010-05-26 | 2016-03-31 | | 2016-03-31 | Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1674-2000-a1-2009/ | EN 1674:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Dough sheeters - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1674-2015/ | EN 1677-1:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 | https://standardsdrift.com/standards/en-1677-1-2000-a1-2008/ | EN 1677-2:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 | https://standardsdrift.com/standards/en-1677-2-2000-a1-2008/ | EN 1677-3:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 | https://standardsdrift.com/standards/en-1677-3-2001-a1-2008/ | EN 1677-4:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 4: Links, Grade 8 | https://standardsdrift.com/standards/en-1677-4-2000-a1-2008/ | EN 1677-5:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 | https://standardsdrift.com/standards/en-1677-5-2001-a1-2008/ | EN 1677-6:2001+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Components for slings - Safety - Part 6: Links - Grade 4 | https://standardsdrift.com/standards/en-1677-6-2001-a1-2008/ | EN 16770:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements | https://standardsdrift.com/standards/en-16770-2018/ | EN 16774:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for steel converter and associated equipment | https://standardsdrift.com/standards/en-16774-2016/ | EN 1678:1998+A1:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1678-1998-a1-2010/ | EN 1679-1:1998+A1:2011 | Machinery | ceasing | 2011-07-20 | 2027-01-20 | | 2026-09-28 | Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines | https://standardsdrift.com/standards/en-1679-1-1998-a1-2011/ | EN 16808:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators | https://standardsdrift.com/standards/en-16808-2020/ | EN 16851:2017 | Machinery | ended | 2017-06-09 | 2023-04-15 | | 2023-04-15 | Cranes - Light crane systems | https://standardsdrift.com/standards/en-16851-2017/ | EN 16851:2017+A1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Cranes - Light crane systems | https://standardsdrift.com/standards/en-16851-2017-a1-2020/ | EN 16890:2017 | General Product Safety | ended | 2020-12-01 | 2026-03-13 | 2020/1808 | 2026-03-13 | Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods | https://standardsdrift.com/standards/en-16890-2017/ | EN 16890:2017+A1:2021 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods | https://standardsdrift.com/standards/en-16890-2017-a1-2021/ | EN 16952:2018 | Machinery | ended | 2019-03-19 | 2025-02-02 | 2019/436 | 2025-02-02 | Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety | https://standardsdrift.com/standards/en-16952-2018/ | EN 16952:2018+A1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety | https://standardsdrift.com/standards/en-16952-2018-a1-2021/ | EN 16985:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Spray booths for organic coating material - Safety requirements | https://standardsdrift.com/standards/en-16985-2018/ | EN 17003:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements | https://standardsdrift.com/standards/en-17003-2021/ | EN 17022:2018 | General Product Safety | cited | 2020-12-01 | | 2020/1808 | 2024-12-13 | Child care articles - Bathing aids - Safety requirements and test methods | https://standardsdrift.com/standards/en-17022-2018/ | EN 17059:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Plating and anodizing lines - Safety requirements | https://standardsdrift.com/standards/en-17059-2018/ | EN 17067:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Forestry machinery - Safety requirements on radio remote controls | https://standardsdrift.com/standards/en-17067-2018/ | EN 17072:2018 | General Product Safety | cited | 2020-12-01 | | 2020/1808 | 2024-12-13 | Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods | https://standardsdrift.com/standards/en-17072-2018/ | EN 17076:2020+A1:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Tower cranes - Anti-collision systems - Safety requirements | https://standardsdrift.com/standards/en-17076-2020-a1-2025/ | EN 17088:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Side curtain ventilation systems - Safety | https://standardsdrift.com/standards/en-17088-2021/ | EN 17106-1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road operation machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-17106-1-2021/ | EN 17106-2:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines | https://standardsdrift.com/standards/en-17106-2-2021/ | EN 17106-3-1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs | https://standardsdrift.com/standards/en-17106-3-1-2021/ | EN 17106-3-2:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines | https://standardsdrift.com/standards/en-17106-3-2-2021/ | EN 17106-4:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines | https://standardsdrift.com/standards/en-17106-4-2021/ | EN 1710:2005+A1:2008 | Machinery | ended | 2009-09-08 | 2020-03-19 | | 2020-03-19 | Equipment and components intended for use in potentially explosive atmospheres in underground mines | https://standardsdrift.com/standards/en-1710-2005-a1-2008/ | EN 1710:2005+A1:2008/AC:2010 EN 17191:2021 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Children's Furniture - Seating for children - Safety requirements and test methods | https://standardsdrift.com/standards/en-17191-2021/ | EN 17281:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Safety requirements - Vehicle cleaning equipment | https://standardsdrift.com/standards/en-17281-2021/ | EN 17348:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres | https://standardsdrift.com/standards/en-17348-2022/ | EN 17352:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods | https://standardsdrift.com/standards/en-17352-2022/ | EN 1755:2000+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust | https://standardsdrift.com/standards/en-1755-2000-a1-2009/ | EN 1755:2000+A2:2013 | Machinery | ended | 2013-11-28 | 2024-02-02 | | 2024-02-02 | Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust | https://standardsdrift.com/standards/en-1755-2000-a2-2013/ | EN 1756-1:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2023-10-11 | | 2023-10-11 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | https://standardsdrift.com/standards/en-1756-1-2001-a1-2008/ | EN 1756-1:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | https://standardsdrift.com/standards/en-1756-1-2021/ | EN 1756-2:2004+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers | https://standardsdrift.com/standards/en-1756-2-2004-a1-2009/ | EN 1760-1:1997+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors | https://standardsdrift.com/standards/en-1760-1-1997-a1-2009/ | EN 1760-2:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars | https://standardsdrift.com/standards/en-1760-2-2001-a1-2009/ | EN 1760-3:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2014-01-31 | | 2014-01-31 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices | https://standardsdrift.com/standards/en-1760-3-2004-a1-2009/ | EN 17624:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air | https://standardsdrift.com/standards/en-17624-2022/ | EN 17639:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Safety of machinery - Cableway installations designed for the transport of material and specially designated persons - General safety requirements | https://standardsdrift.com/standards/en-17639-2025/ | EN 17657:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Equipments for slaughterhouses - Slaughtering traps for bovine animals - Safety and cleaning requirements | https://standardsdrift.com/standards/en-17657-2025/ | EN 17677:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements | https://standardsdrift.com/standards/en-17677-2024/ | EN 17744:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for dusters | https://standardsdrift.com/standards/en-17744-2025/ | EN 17745:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for granule applicator of Plant Protection Products | https://standardsdrift.com/standards/en-17745-2025/ | EN 1777:2004+A1:2009 | Machinery | ended | 2009-09-08 | 2010-09-30 | | 2010-09-30 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing | https://standardsdrift.com/standards/en-1777-2004-a1-2009/ | EN 1777:2010 | Machinery | ended | 2010-05-26 | 2010-09-30 | | 2010-09-30 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing | https://standardsdrift.com/standards/en-1777-2010/ | EN 17923:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Equipment for vine cultivation and wine making - Safety - Must and grape harvest pumps | https://standardsdrift.com/standards/en-17923-2025/ | EN 17942:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment | https://standardsdrift.com/standards/en-17942-2024/ | EN 17969 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Earth-moving machinery - Safety - Contamination protective systems | https://standardsdrift.com/standards/en-17969/ | EN 18031-1:2024 | Radio Equipment | restricted | 2025-01-30 | | 2025/138 | 2025-01-30 | Common security requirements for radio equipment - Part 1: Internet connected radio equipment | https://standardsdrift.com/standards/en-18031-1-2024/ | EN 18031-2:2024 | Radio Equipment | restricted | 2025-01-30 | | 2025/138 | 2025-01-30 | Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment | https://standardsdrift.com/standards/en-18031-2-2024/ | EN 18031-3:2024 | Radio Equipment | restricted | 2025-01-30 | | 2025/138 | 2025-01-30 | Common security requirements for radio equipment - Part 3: Internet connected radio equipment processing virtual money or monetary value | https://standardsdrift.com/standards/en-18031-3-2024/ | EN 1804-1:2001+A1:2010 | Machinery | ended | 2010-05-26 | 2023-04-15 | | 2023-04-15 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | https://standardsdrift.com/standards/en-1804-1-2001-a1-2010/ | EN 1804-1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | https://standardsdrift.com/standards/en-1804-1-2020/ | EN 1804-2:2001+A1:2010 | Machinery | ended | 2010-05-26 | 2023-04-15 | | 2023-04-15 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | https://standardsdrift.com/standards/en-1804-2-2001-a1-2010/ | EN 1804-2:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | https://standardsdrift.com/standards/en-1804-2-2020/ | EN 1804-3:2006+A1:2010 | Machinery | ended | 2010-05-26 | 2023-04-15 | | 2023-04-15 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems | https://standardsdrift.com/standards/en-1804-3-2006-a1-2010/ | EN 1804-3:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems | https://standardsdrift.com/standards/en-1804-3-2020/ | EN 1807-1:2013 | Machinery | ended | 2013-11-28 | 2025-02-02 | | 2025-02-02 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws | https://standardsdrift.com/standards/en-1807-1-2013/ | EN 1807-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines | https://standardsdrift.com/standards/en-1807-2-2013/ | EN 1807:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2013-11-28 | | 2013-11-28 | Safety of woodworking machines - Band sawing machines | https://standardsdrift.com/standards/en-1807-1999-a1-2009/ | EN 1808:1999+A1:2010 | Machinery | ended | 2010-10-20 | 2016-05-13 | | 2016-05-13 | Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests | https://standardsdrift.com/standards/en-1808-1999-a1-2010/ | EN 1808:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests | https://standardsdrift.com/standards/en-1808-2015/ | EN 1829-1:2010 | Machinery | ended | 2010-05-26 | 2023-10-11 | | 2023-10-11 | High pressure water jet machines - Safety requirements - Part 1: Machines | https://standardsdrift.com/standards/en-1829-1-2010/ | EN 1829-1:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | High-pressure water jet machines - Safety requirements - Part 1: Machines | https://standardsdrift.com/standards/en-1829-1-2021/ | EN 1829-2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors | https://standardsdrift.com/standards/en-1829-2-2008/ | EN 1829-2:2008/AC:2011 EN 1837:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2023-04-15 | | 2023-04-15 | Safety of machinery - Integral lighting of machines | https://standardsdrift.com/standards/en-1837-1999-a1-2009/ | EN 1837:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Safety of machinery - Integral lighting of machines | https://standardsdrift.com/standards/en-1837-2020/ | EN 1845:2007 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements | https://standardsdrift.com/standards/en-1845-2007/ | EN 1846-2:2001+A3:2009 | Machinery | ended | 2009-09-08 | 2011-02-28 | | 2011-02-28 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | https://standardsdrift.com/standards/en-1846-2-2001-a3-2009/ | EN 1846-2:2009 | Machinery | ended | 2009-12-18 | 2013-11-28 | | 2013-11-28 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | https://standardsdrift.com/standards/en-1846-2-2009/ | EN 1846-2:2009+A1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2025-08-14 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | https://standardsdrift.com/standards/en-1846-2-2009-a1-2013/ | EN 1846-2:2024 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | https://standardsdrift.com/standards/en-1846-2-2024/ | EN 1846-3:2002+A1:2008 | Machinery | ended | 2009-09-08 | 2014-01-31 | | 2014-01-31 | Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | https://standardsdrift.com/standards/en-1846-3-2002-a1-2008/ | EN 1846-3:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | https://standardsdrift.com/standards/en-1846-3-2013/ | EN 1853:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2020-09-19 | | 2020-09-19 | Agricultural machinery - Trailers with tipping body - Safety | https://standardsdrift.com/standards/en-1853-1999-a1-2009/ | EN 1853:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Agricultural machinery - Trailers - Safety | https://standardsdrift.com/standards/en-1853-2017/ | EN 1870-10:2003+A1:2009 | Machinery | ended | 2009-12-18 | 2013-11-30 | | 2013-11-30 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-10-2003-a1-2009/ | EN 1870-10:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-10-2013/ | EN 1870-11:2003+A1:2009 | Machinery | ended | 2009-12-18 | 2014-04-30 | | 2014-04-30 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | https://standardsdrift.com/standards/en-1870-11-2003-a1-2009/ | EN 1870-11:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | https://standardsdrift.com/standards/en-1870-11-2013/ | EN 1870-12:2003+A1:2009 | Machinery | ended | 2009-12-18 | 2014-04-30 | | 2014-04-30 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-12-2003-a1-2009/ | EN 1870-12:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-12-2013/ | EN 1870-13:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2012-09-30 | | 2012-09-30 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | https://standardsdrift.com/standards/en-1870-13-2007-a1-2009/ | EN 1870-13:2007+A2:2012 | Machinery | ended | 2012-06-05 | 2020-09-19 | | 2020-09-19 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | https://standardsdrift.com/standards/en-1870-13-2007-a2-2012/ | EN 1870-14:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2012-09-30 | | 2012-09-30 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | https://standardsdrift.com/standards/en-1870-14-2007-a1-2009/ | EN 1870-14:2007+A2:2012 | Machinery | ended | 2012-06-05 | 2020-09-19 | | 2020-09-19 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | https://standardsdrift.com/standards/en-1870-14-2007-a2-2012/ | EN 1870-15:2004+A1:2009 | Machinery | ended | 2009-12-18 | 2013-04-30 | | 2013-04-30 | Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-15-2004-a1-2009/ | EN 1870-15:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-15-2012/ | EN 1870-16:2005+A1:2009 | Machinery | ended | 2009-12-18 | 2013-04-30 | | 2013-04-30 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting | https://standardsdrift.com/standards/en-1870-16-2005-a1-2009/ | EN 1870-16:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting | https://standardsdrift.com/standards/en-1870-16-2012/ | EN 1870-17:2007+A2:2009 | Machinery | ended | 2009-12-18 | 2016-05-13 | | 2016-05-13 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) | https://standardsdrift.com/standards/en-1870-17-2007-a2-2009/ | EN 1870-17:2012 | Machinery | ended | 2015-02-13 | 2016-05-13 | | 2016-05-13 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) | https://standardsdrift.com/standards/en-1870-17-2012/ | EN 1870-17:2012+A1:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) | https://standardsdrift.com/standards/en-1870-17-2012-a1-2015/ | EN 1870-18:2013 | Machinery | ended | 2013-11-28 | 2018-06-30 | | 2018-06-30 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws | https://standardsdrift.com/standards/en-1870-18-2013/ | EN 1870-19:2013 | Machinery | ended | 2014-04-11 | 2022-09-03 | | 2022-09-03 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws | https://standardsdrift.com/standards/en-1870-19-2013/ | EN 1870-1:2007+A1:2009 | Machinery | ended | 2009-09-08 | 2014-05-31 | | 2014-05-31 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws | https://standardsdrift.com/standards/en-1870-1-2007-a1-2009/ | EN 1870-3:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches | https://standardsdrift.com/standards/en-1870-3-2001-a1-2009/ | EN 1870-4:2001+A1:2009 | Machinery | ended | 2009-12-18 | 2012-09-30 | | 2012-09-30 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-4-2001-a1-2009/ | EN 1870-4:2012 | Machinery | ended | 2012-06-05 | 2022-09-03 | | 2022-09-03 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-4-2012/ | EN 1870-5:2002+A1:2009 | Machinery | ended | 2009-12-18 | 2013-03-31 | | 2013-03-31 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-5-2002-a1-2009/ | EN 1870-5:2002+A2:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines | https://standardsdrift.com/standards/en-1870-5-2002-a2-2012/ | EN 1870-6:2002+A1:2009 | Machinery | ended | 2009-12-18 | 2020-09-19 | | 2020-09-19 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-6-2002-a1-2009/ | EN 1870-6:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood | https://standardsdrift.com/standards/en-1870-6-2017/ | EN 1870-7:2002+A1:2009 | Machinery | ended | 2009-12-18 | 2013-04-30 | | 2013-04-30 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-7-2002-a1-2009/ | EN 1870-7:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-7-2012/ | EN 1870-8:2001+A1:2009 | Machinery | ended | 2009-12-18 | 2013-05-31 | | 2013-05-31 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-8-2001-a1-2009/ | EN 1870-8:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-8-2012/ | EN 1870-9:2000+A1:2009 | Machinery | ended | 2009-12-18 | 2013-03-31 | | 2013-03-31 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-9-2000-a1-2009/ | EN 1870-9:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading | https://standardsdrift.com/standards/en-1870-9-2012/ | EN 1889-1:2011 | Machinery | ended | 2011-11-18 | 2021-10-02 | | 2021-10-02 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles | https://standardsdrift.com/standards/en-1889-1-2011/ | EN 1889-2:2003+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives | https://standardsdrift.com/standards/en-1889-2-2003-a1-2009/ | EN 1915-1:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements | https://standardsdrift.com/standards/en-1915-1-2001-a1-2009/ | EN 1915-1:2013 | Machinery | ended | 2013-11-28 | 2025-11-15 | | 2025-11-15 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements | https://standardsdrift.com/standards/en-1915-1-2013/ | EN 1915-1:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements | https://standardsdrift.com/standards/en-1915-1-2023/ | EN 1915-2:2001+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods | https://standardsdrift.com/standards/en-1915-2-2001-a1-2009/ | EN 1915-3:2004+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction | https://standardsdrift.com/standards/en-1915-3-2004-a1-2009/ | EN 1915-4:2004+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction | https://standardsdrift.com/standards/en-1915-4-2004-a1-2009/ | EN 1930:2011 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Child use and care articles - Safety barriers - Safety requirements and test methods | https://standardsdrift.com/standards/en-1930-2011/ | EN 1953:1998+A1:2009 | Machinery | ended | 2009-12-18 | 2014-03-31 | | 2014-03-31 | Atomising and spraying equipment for coating materials - Safety requirements | https://standardsdrift.com/standards/en-1953-1998-a1-2009/ | EN 1953:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2025-08-14 | Atomising and spraying equipment for coating materials - Safety requirements | https://standardsdrift.com/standards/en-1953-2013/ | EN 1953:2025 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Application equipment for coating materials - Safety requirements | https://standardsdrift.com/standards/en-1953-2025/ | EN 1974:1998+A1:2009 | Machinery | ended | 2009-12-18 | 2023-04-15 | | 2023-04-15 | Food processing machinery - Slicing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1974-1998-a1-2009/ | EN 1974:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Food processing machinery - Slicing machines - Safety and hygiene requirements | https://standardsdrift.com/standards/en-1974-2020/ | EN 201:2009 | Machinery | ended | 2009-12-18 | 2023-04-15 | | 2023-04-15 | Plastics and rubber machines - Injection moulding machines - Safety requirements | https://standardsdrift.com/standards/en-201-2009/ | EN 267:2009 | Machinery | ended | 2010-05-26 | 2012-02-29 | | 2012-02-29 | Automatic forced draught burners for liquid fuels | https://standardsdrift.com/standards/en-267-2009/ | EN 267:2009+A1:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Automatic forced draught burners for liquid fuels | https://standardsdrift.com/standards/en-267-2009-a1-2011/ | EN 280-1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests | https://standardsdrift.com/standards/en-280-1-2022/ | EN 280-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform | https://standardsdrift.com/standards/en-280-2-2022/ | EN 280:2001+A2:2009 | Machinery | ended | 2009-12-18 | 2015-01-31 | | 2015-01-31 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests | https://standardsdrift.com/standards/en-280-2001-a2-2009/ | EN 280:2013 | Machinery | ended | 2013-11-28 | 2017-02-28 | | 2017-02-28 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests | https://standardsdrift.com/standards/en-280-2013/ | EN 280:2013+A1:2015 | Machinery | ended | 2016-01-15 | 2025-02-02 | | 2025-02-02 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests | https://standardsdrift.com/standards/en-280-2013-a1-2015/ | EN 289:2004+A1:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Plastics and rubber machines - Presses - Safety requirements | https://standardsdrift.com/standards/en-289-2004-a1-2008/ | EN 289:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements | https://standardsdrift.com/standards/en-289-2014/ | EN 300 065 V2.1.2 | Radio Equipment | cited | 2016-07-08 | | | 2016-07-08 | Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-065-v2-1-2/ | EN 300 086 V2.1.2 | Radio Equipment | cited | 2016-12-09 | | | 2016-12-09 | Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-086-v2-1-2/ | EN 300 113 V2.2.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-113-v2-2-1/ | EN 300 219 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-219-v2-1-1/ | EN 300 220-2 V3.1.1 | Radio Equipment | ceasing | 2017-03-10 | 2027-06-11 | | 2025-12-11 | Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU for non specific radio equipment | https://standardsdrift.com/standards/en-300-220-2-v3-1-1/ | EN 300 220-2 V3.3.1 | Radio Equipment | cited | 2025-12-11 | | 2025/2499 | 2025-12-11 | Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment | https://standardsdrift.com/standards/en-300-220-2-v3-3-1/ | EN 300 220-3-1 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) | https://standardsdrift.com/standards/en-300-220-3-1-v2-1-1/ | EN 300 220-3-2 V1.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz | https://standardsdrift.com/standards/en-300-220-3-2-v1-1-1/ | EN 300 220-4 V1.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz | https://standardsdrift.com/standards/en-300-220-4-v1-1-1/ | EN 300 224 V2.1.1 | Radio Equipment | cited | 2017-10-13 | | | 2017-10-13 | Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz - 470 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-224-v2-1-1/ | EN 300 224-2 V1.1.1 | Radio Equipment | ended | 2017-06-08 | 2019-02-28 | | 2019-02-28 | Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-300-224-2-v1-1-1/ | EN 300 296 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-296-v2-1-1/ | EN 300 328 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2021-08-06 | | 2021-08-06 | Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-328-v2-1-1/ | EN 300 328 V2.2.2 | Radio Equipment | cited | 2020-02-06 | | 2020/167 | 2020-02-06 | Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-300-328-v2-2-2/ | EN 300 330 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-330-v2-1-1/ | EN 300 341 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-341-v2-1-1/ | EN 300 390 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-390-v2-1-1/ | EN 300 422-1 V2.1.2 | Radio Equipment | ended | 2017-02-10 | 2024-05-10 | | 2024-05-10 | Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-422-1-v2-1-2/ | EN 300 422-1 V2.2.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Audio PMSE Equipment up to 3 GHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-300-422-1-v2-2-1/ | EN 300 422-2 V2.1.1 | Radio Equipment | ended | 2017-03-10 | 2024-05-10 | | 2024-05-10 | Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-422-2-v2-1-1/ | EN 300 422-3 V2.1.1 | Radio Equipment | ended | 2017-03-10 | 2024-05-10 | | 2024-05-10 | Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-422-3-v2-1-1/ | EN 300 422-4 V2.1.1 | Radio Equipment | cited | 2018-02-09 | | | 2018-02-09 | Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-422-4-v2-1-1/ | EN 300 433 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-433-v2-1-1/ | EN 300 440 V2.1.1 | Radio Equipment | restricted | 2017-07-14 | | | 2017-07-14 | Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-440-v2-1-1/ | EN 300 440-2 V1.4.1 | Radio Equipment | ended | 2017-06-08 | 2018-12-31 | | 2018-12-31 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-300-440-2-v1-4-1/ | EN 300 440-2 V3.1.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Short Range Devices (SRD) operating in 1 GHz to 40 GHz; Harmonised Standard for access to radio spectrum; Part 2: Radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz | https://standardsdrift.com/standards/en-300-440-2-v3-1-1/ | EN 300 454-2 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-300-454-2-v1-1-1/ | EN 300 487 V2.1.2 | Radio Equipment | ceasing | 2017-01-13 | 2027-02-14 | | 2025-08-14 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-487-v2-1-2/ | EN 300 487 V2.2.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | Satellite Earth Stations and Systems (SES); Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-300-487-v2-2-1/ | EN 300 674-2-1 V3.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 1: Road Side Units (RSU) | https://standardsdrift.com/standards/en-300-674-2-1-v3-1-1/ | EN 300 674-2-2 V2.1.1 | Radio Equipment | ended | 2018-03-09 | 2021-08-06 | | 2021-08-06 | Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Sub-part 2: On-Board Units (OBU) | https://standardsdrift.com/standards/en-300-674-2-2-v2-1-1/ | EN 300 674-2-2 V2.2.1 | Radio Equipment | cited | 2020-02-06 | | 2020/167 | 2020-02-06 | Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 2: On-Board Units (OBU) | https://standardsdrift.com/standards/en-300-674-2-2-v2-2-1/ | EN 300 676-2 V2.1.1 | Radio Equipment | cited | 2016-07-08 | | | 2016-07-08 | Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-676-2-v2-1-1/ | EN 300 698 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2018-05-31 | | 2018-05-31 | Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-698-v2-1-1/ | EN 300 698 V2.2.1 | Radio Equipment | ended | 2017-12-15 | 2021-08-06 | | 2021-08-06 | Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-698-v2-2-1/ | EN 300 698 V2.3.1 | Radio Equipment | restricted | 2020-02-06 | | 2020/167 | 2020-02-06 | Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard for access to radio spectrum and for features for emergency services | https://standardsdrift.com/standards/en-300-698-v2-3-1/ | EN 300 718-1 V2.2.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/498 | 2022-03-29 | Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-300-718-1-v2-2-1/ | EN 300 718-2 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-300-718-2-v1-1-1/ | EN 300 718-2 V2.1.1 | Radio Equipment | cited | 2018-03-09 | | | 2018-03-09 | Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services | https://standardsdrift.com/standards/en-300-718-2-v2-1-1/ | EN 300 718-3 V1.2.1 | Radio Equipment | ended | 2017-06-08 | 2019-09-30 | | 2019-09-30 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering the essential requirements of Article 3(3)(e) of the R&TTE Directive | https://standardsdrift.com/standards/en-300-718-3-v1-2-1/ | EN 300 720 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-300-720-v2-1-1/ | EN 301 025 V2.1.1 | Radio Equipment | ended | 2016-08-12 | 2018-11-30 | | 2018-11-30 | VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-025-v2-1-1/ | EN 301 025 V2.2.1 | Radio Equipment | ended | 2017-04-12 | 2024-05-10 | | 2024-05-10 | VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-025-v2-2-1/ | EN 301 025 V2.3.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Harmonised Standard for access to radio spectrum and for features for emergency services | https://standardsdrift.com/standards/en-301-025-v2-3-1/ | EN 301 091-2 V1.3.2 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-301-091-2-v1-3-2/ | EN 301 166 V2.1.1 | Radio Equipment | cited | 2017-02-10 | | | 2017-02-10 | Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-166-v2-1-1/ | EN 301 178 V2.2.2 | Radio Equipment | cited | 2017-05-12 | | | 2017-05-12 | Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-178-v2-2-2/ | EN 301 357 V2.1.1 | Radio Equipment | cited | 2017-07-14 | | | 2017-07-14 | Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-357-v2-1-1/ | EN 301 357-2 V1.4.1 | Radio Equipment | ended | 2017-06-08 | 2019-02-28 | | 2019-02-28 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-301-357-2-v1-4-1/ | EN 301 360 V2.1.1 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-360-v2-1-1/ | EN 301 406 V2.2.2 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-406-v2-2-2/ | EN 301 406-2 V3.1.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard for access to radio spectrum; Part 2: DECT-2020 NR | https://standardsdrift.com/standards/en-301-406-2-v3-1-1/ | EN 301 426 V2.1.2 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-426-v2-1-2/ | EN 301 427 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-427-v2-1-1/ | EN 301 428 V2.1.2 | Radio Equipment | cited | 2017-06-08 | | | 2017-06-08 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-428-v2-1-2/ | EN 301 430 V2.1.1 | Radio Equipment | cited | 2016-10-14 | | | 2016-10-14 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-430-v2-1-1/ | EN 301 441 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-441-v2-1-1/ | EN 301 442 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-442-v2-1-1/ | EN 301 443 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-443-v2-1-1/ | EN 301 444 V2.1.2 | Radio Equipment | ended | 2017-01-13 | 2023-09-29 | | 2023-09-29 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-444-v2-1-2/ | EN 301 444 V2.2.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/498 | 2022-03-29 | Satellite Earth Stations and Systems (SES); Land Mobile Earth Stations (LMES) and Maritime Mobile Earth Stations (MMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-301-444-v2-2-1/ | EN 301 447 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-447-v2-1-1/ | EN 301 459 V2.1.1 | Radio Equipment | cited | 2016-10-14 | | | 2016-10-14 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-459-v2-1-1/ | EN 301 473 V2.1.2 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-473-v2-1-2/ | EN 301 489-12 V3.2.1 | Radio Equipment | restricted | 2022-11-10 | 2025-05-15 | 2022/2191, 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS); Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-12-v3-2-1/ | EN 301 489-13 V2.1.1 | Radio Equipment | restricted | 2026-09-07 | | 2026/2003 | 2026-09-28 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for Citizens' Band (CB) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-13-v2-1-1/ | EN 301 489-17 V3.3.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-17-v3-3-1/ | EN 301 489-19 V2.2.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-19-v2-2-1/ | EN 301 489-20 V2.2.1 | Radio Equipment | restricted | 2022-11-10 | | 2022/2191, 2025/893 | 2026-09-28 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-20-v2-2-1/ | EN 301 489-28 V2.1.1 | Radio Equipment | restricted | 2025-08-14 | | 2025/1741 | 2025-08-14 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-28-v2-1-1/ | EN 301 489-3 V2.3.2 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-3-v2-3-2/ | EN 301 489-5 V2.3.1 | Radio Equipment | restricted | 2026-09-07 | | 2026/2003 | 2026-09-28 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-5-v2-3-1/ | EN 301 489-50 V2.4.1 | Radio Equipment | restricted | 2026-09-07 | | 2026/2003 | 2026-09-28 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-50-v2-4-1/ | EN 301 489-52 V1.2.1 | Radio Equipment | ceasing | 2022-11-10 | 2026-11-15 | 2022/2191, 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment;Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-52-v1-2-1/ | EN 301 489-52 V1.3.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility | https://standardsdrift.com/standards/en-301-489-52-v1-3-1/ | EN 301 489-54 V1.1.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 54: Specific conditions for fixed ground based aeronautical and meteorological radars; Harmonised Standard for electromagnetic compatibility | https://standardsdrift.com/standards/en-301-489-54-v1-1-1/ | EN 301 502 V12.5.2 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-502-v12-5-2/ | EN 301 511 V12.5.1 | Radio Equipment | cited | 2018-02-09 | | | 2018-02-09 | Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-511-v12-5-1/ | EN 301 511 V9.0.2 | Radio Equipment | ended | 2017-04-12 | 2019-04-30 | | 2019-04-30 | Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under Article 3(2) of the R&TTE directive (1999/5/EC) | https://standardsdrift.com/standards/en-301-511-v9-0-2/ | EN 301 559 V2.1.1 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-559-v2-1-1/ | EN 301 598 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-301-598-v1-1-1/ | EN 301 681 V2.1.2 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-681-v2-1-2/ | EN 301 721 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-721-v2-1-1/ | EN 301 783 V2.1.1 | Radio Equipment | cited | 2016-07-08 | | | 2016-07-08 | Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-783-v2-1-1/ | EN 301 839 V2.1.1 | Radio Equipment | cited | 2016-07-08 | | | 2016-07-08 | Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-839-v2-1-1/ | EN 301 841-3 V2.1.1 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-841-3-v2-1-1/ | EN 301 842-5 V2.1.1 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-842-5-v2-1-1/ | EN 301 893 V1.8.1 | Radio Equipment | ended | 2017-06-08 | 2018-06-12 | | 2018-06-12 | Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-301-893-v1-8-1/ | EN 301 893 V2.1.1 | Radio Equipment | ceasing | 2017-06-08 | 2028-05-15 | | 2025-05-15 | 5 GHz RLAN; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-893-v2-1-1/ | EN 301 893 V2.2.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | 5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-301-893-v2-2-1/ | EN 301 908-1 V11.1.1 | Radio Equipment | ended | 2016-12-09 | 2021-10-22 | | 2021-10-22 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 1: Introduction and common requirements | https://standardsdrift.com/standards/en-301-908-1-v11-1-1/ | EN 301 908-1 V13.1.1 | Radio Equipment | ended | 2020-04-22 | 2023-09-29 | 2020/553 | 2023-09-29 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements | https://standardsdrift.com/standards/en-301-908-1-v13-1-1/ | EN 301 908-1 V15.1.1 | Radio Equipment | ended | 2022-03-29 | 2025-04-04 | 2022/498 | 2025-04-04 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements Release 15 | https://standardsdrift.com/standards/en-301-908-1-v15-1-1/ | EN 301 908-1 V15.2.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements; Release 15 | https://standardsdrift.com/standards/en-301-908-1-v15-2-1/ | EN 301 908-10 V4.2.2 | Radio Equipment | ended | 2017-01-13 | 2024-05-10 | | 2024-05-10 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-908-10-v4-2-2/ | EN 301 908-10 V4.3.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 10: Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks | https://standardsdrift.com/standards/en-301-908-10-v4-3-1/ | EN 301 908-11 V11.1.2 | Radio Equipment | cited | 2017-02-10 | | | 2017-02-10 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters | https://standardsdrift.com/standards/en-301-908-11-v11-1-2/ | EN 301 908-12 V7.1.1 | Radio Equipment | cited | 2016-09-09 | | | 2016-09-09 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters | https://standardsdrift.com/standards/en-301-908-12-v7-1-1/ | EN 301 908-13 V11.1.1 | Radio Equipment | ended | 2017-05-12 | 2019-02-28 | | 2019-02-28 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-13-v11-1-1/ | EN 301 908-13 V11.1.2 | Radio Equipment | ended | 2017-10-13 | 2021-10-27 | | 2021-10-27 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-13-v11-1-2/ | EN 301 908-13 V13.1.1 | Radio Equipment | ended | 2020-10-27 | 2024-05-10 | 2020/1562 | 2024-05-10 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-13-v13-1-1/ | EN 301 908-13 V13.2.1 | Radio Equipment | ceasing | 2022-11-10 | 2026-11-15 | 2022/2191 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-13-v13-2-1/ | EN 301 908-13 V13.3.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-13-v13-3-1/ | EN 301 908-14 V11.1.2 | Radio Equipment | ended | 2017-05-12 | 2021-10-21 | | 2021-10-21 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-14-v11-1-2/ | EN 301 908-14 V13.1.1 | Radio Equipment | ended | 2020-04-22 | 2023-09-29 | 2020/553 | 2023-09-29 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-14-v13-1-1/ | EN 301 908-14 V15.1.1 | Radio Equipment | ceasing | 2022-03-29 | 2027-02-14 | 2022/498 | 2025-08-14 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) Release 15 | https://standardsdrift.com/standards/en-301-908-14-v15-1-1/ | EN 301 908-14 V17.1.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) Release 17 | https://standardsdrift.com/standards/en-301-908-14-v17-1-1/ | EN 301 908-15 V11.1.2 | Radio Equipment | ended | 2017-02-10 | 2023-09-29 | | 2023-09-29 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters | https://standardsdrift.com/standards/en-301-908-15-v11-1-2/ | EN 301 908-15 V15.1.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters | https://standardsdrift.com/standards/en-301-908-15-v15-1-1/ | EN 301 908-18 V11.1.2 | Radio Equipment | ended | 2017-05-12 | 2021-10-21 | | 2021-10-21 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) | https://standardsdrift.com/standards/en-301-908-18-v11-1-2/ | EN 301 908-18 V13.1.1 | Radio Equipment | ended | 2020-04-22 | 2023-09-29 | 2020/553 | 2023-09-29 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) | https://standardsdrift.com/standards/en-301-908-18-v13-1-1/ | EN 301 908-18 V15.1.1 | Radio Equipment | ceasing | 2022-03-29 | 2027-02-14 | 2022/498 | 2025-08-14 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) Release 15 | https://standardsdrift.com/standards/en-301-908-18-v15-1-1/ | EN 301 908-18 V17.1.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: NR, E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) Release 17 | https://standardsdrift.com/standards/en-301-908-18-v17-1-1/ | EN 301 908-19 V6.3.1 | Radio Equipment | cited | 2017-06-08 | | | 2017-06-08 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-19-v6-3-1/ | EN 301 908-2 V11.1.1 | Radio Equipment | ended | 2017-04-12 | 2019-02-28 | | 2019-02-28 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-2-v11-1-1/ | EN 301 908-2 V11.1.2 | Radio Equipment | ended | 2017-10-13 | 2021-10-27 | | 2021-10-27 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-2-v11-1-2/ | EN 301 908-2 V13.1.1 | Radio Equipment | cited | 2020-10-27 | | 2020/1562 | 2020-10-27 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-2-v13-1-1/ | EN 301 908-20 V6.3.1 | Radio Equipment | cited | 2016-10-14 | | | 2016-10-14 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-20-v6-3-1/ | EN 301 908-21 V6.1.1 | Radio Equipment | cited | 2016-10-14 | | | 2016-10-14 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE) | https://standardsdrift.com/standards/en-301-908-21-v6-1-1/ | EN 301 908-22 V6.1.1 | Radio Equipment | cited | 2016-12-09 | | | 2016-12-09 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-22-v6-1-1/ | EN 301 908-23 V15.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 23: Active Antenna System (AAS) Base Station (BS); Release 15 | https://standardsdrift.com/standards/en-301-908-23-v15-1-1/ | EN 301 908-24 V15.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 24: New Radio (NR) Base Stations (BS) Release 15 | https://standardsdrift.com/standards/en-301-908-24-v15-1-1/ | EN 301 908-25 V15.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 25: New Radio (NR) User Equipment (UE) Release 15 | https://standardsdrift.com/standards/en-301-908-25-v15-1-1/ | EN 301 908-3 V11.1.3 | Radio Equipment | ended | 2017-05-12 | 2021-10-22 | | 2021-10-22 | IMT cellular networks; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-3-v11-1-3/ | EN 301 908-3 V13.1.1 | Radio Equipment | ceasing | 2020-04-22 | 2026-11-15 | 2020/553 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) | https://standardsdrift.com/standards/en-301-908-3-v13-1-1/ | EN 301 908-3 V15.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) Release 15 | https://standardsdrift.com/standards/en-301-908-3-v15-1-1/ | EN 301 929 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-301-929-v2-1-1/ | EN 302 017 V2.1.1 | Radio Equipment | cited | 2017-05-12 | | | 2017-05-12 | Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-017-v2-1-1/ | EN 302 018 V2.1.1 | Radio Equipment | cited | 2017-06-08 | | | 2017-06-08 | Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-018-v2-1-1/ | EN 302 018-2 V1.2.1 | Radio Equipment | ended | 2017-04-12 | 2018-12-31 | | 2018-12-31 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-018-2-v1-2-1/ | EN 302 054 V2.1.1 | Radio Equipment | ended | 2017-12-15 | 2018-10-31 | | 2018-10-31 | Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-054-v2-1-1/ | EN 302 054 V2.2.1 | Radio Equipment | cited | 2018-03-09 | | | 2018-03-09 | Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-054-v2-2-1/ | EN 302 054-2 V1.2.1 | Radio Equipment | ended | 2017-01-13 | 2018-05-31 | | 2018-05-31 | Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-054-2-v1-2-1/ | EN 302 064 V2.2.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Wireless Digital Video Links operating in the 1,3 GHz to 50 GHz frequency band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-064-v2-2-1/ | EN 302 064-2 V1.1.1 | Radio Equipment | ceasing | 2017-06-08 | 2026-11-15 | | 2025-05-15 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-064-2-v1-1-1/ | EN 302 065-1 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications | https://standardsdrift.com/standards/en-302-065-1-v2-1-1/ | EN 302 065-2 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking | https://standardsdrift.com/standards/en-302-065-2-v2-1-1/ | EN 302 065-3 V2.1.1 | Radio Equipment | ceasing | 2017-03-10 | 2027-02-14 | 2020/167 | 2025-08-14 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications | https://standardsdrift.com/standards/en-302-065-3-v2-1-1/ | EN 302 065-3-1 V3.2.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised standard for access to radio spectrum; Part 3: UWB devices installed in motor and railway vehicles; Sub-part 1:Requirements for UWB devices for vehicular access systems within 3,8 GHz to 4,2 GHz or 6 GHz to 8,5 GHz | https://standardsdrift.com/standards/en-302-065-3-1-v3-2-1/ | EN 302 065-3-3 V3.1.0 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised standard for access to radio spectrum; Part 3: UWB devices installed in motor and railway vehicles; Sub-part 3: Requirements for UWB radiodetermination applications operating within 6,0 GHz to 8,5 GHz | https://standardsdrift.com/standards/en-302-065-3-3-v3-1-0/ | EN 302 065-4 V1.1.1 | Radio Equipment | ceasing | 2017-04-12 | 2027-02-14 | | 2025-08-14 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz | https://standardsdrift.com/standards/en-302-065-4-v1-1-1/ | EN 302 065-4-1 V2.2.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard for access to radio spectrum; Part 4: Material Sensing devices; Sub-part 1: Building material analysis operating within 30 MHz to 10,6 GHz | https://standardsdrift.com/standards/en-302-065-4-1-v2-2-1/ | EN 302 065-4-4 V2.1.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard for access to radio spectrum; Part 4: Material Sensing devices; Sub-part 4: Exterior material sensing applications for ground based vehicles below 10,6 GHz | https://standardsdrift.com/standards/en-302-065-4-4-v2-1-1/ | EN 302 066 V2.2.1 | Radio Equipment | restricted | 2021-07-20 | | 2021/1196 | 2021-07-20 | Short Range Devices (SRD); Ground- and Wall- Probing Radio determination (GPR/WPR) devices; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-066-v2-2-1/ | EN 302 066-2 V1.2.1 | Radio Equipment | ended | 2017-06-08 | 2023-01-20 | | 2023-01-20 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-066-2-v1-2-1/ | EN 302 077 V2.3.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-077-v2-3-1/ | EN 302 077-2 V1.1.1 | Radio Equipment | ended | 2017-04-12 | 2025-04-04 | | 2025-04-04 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial - Digital Audio Broadcasting | https://standardsdrift.com/standards/en-302-077-2-v1-1-1/ | EN 302 186 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-186-v2-1-1/ | EN 302 194-2 V1.1.2 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-194-2-v1-1-2/ | EN 302 195 V2.1.1 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-195-v2-1-1/ | EN 302 208 V3.1.1 | Radio Equipment | ended | 2017-04-12 | 2023-01-20 | | 2023-01-20 | Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-208-v3-1-1/ | EN 302 208 V3.3.1 | Radio Equipment | restricted | 2021-07-20 | | 2021/1196 | 2021-07-20 | Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-208-v3-3-1/ | EN 302 217-2 V3.1.1 | Radio Equipment | ended | 2017-06-08 | 2022-04-27 | | 2022-04-27 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-217-2-v3-1-1/ | EN 302 217-2 V3.2.2 | Radio Equipment | ended | 2020-10-27 | 2023-09-29 | 2020/1562 | 2023-09-29 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-217-2-v3-2-2/ | EN 302 217-2 V3.3.1 | Radio Equipment | ceasing | 2022-03-29 | 2028-03-07 | 2022/498 | 2026-09-28 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-217-2-v3-3-1/ | EN 302 217-2 V3.4.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 174,8 GHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-217-2-v3-4-1/ | EN 302 217-2-2 V2.2.1 | Radio Equipment | ended | 2017-04-12 | 2018-12-31 | | 2018-12-31 | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency co-ordination is applied; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-217-2-2-v2-2-1/ | EN 302 245 V2.2.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | Transmitting equipment for the Digital Radio Mondiale (DRM) service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-245-v2-2-1/ | EN 302 245-2 V1.1.1 | Radio Equipment | ended | 2017-04-12 | 2025-04-04 | | 2025-04-04 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service; Part 2: Harmonised EN under Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-245-2-v1-1-1/ | EN 302 248 V2.1.1 | Radio Equipment | cited | 2017-03-10 | | | 2017-03-10 | Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-248-v2-1-1/ | EN 302 264-2 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-264-2-v1-1-1/ | EN 302 288-2 V1.6.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-288-2-v1-6-1/ | EN 302 296 V2.2.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/498 | 2022-03-29 | Digital Terrestrial TV Transmitters; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-296-v2-2-1/ | EN 302 296-2 V1.2.1 | Radio Equipment | ended | 2017-04-12 | 2023-09-29 | | 2023-09-29 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-296-2-v1-2-1/ | EN 302 326-2 V1.2.2 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive for Digital Multipoint Radio Equipment | https://standardsdrift.com/standards/en-302-326-2-v1-2-2/ | EN 302 340 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-340-v2-1-1/ | EN 302 372 V2.1.1 | Radio Equipment | ceasing | 2017-03-10 | 2028-03-07 | | 2026-09-28 | Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-372-v2-1-1/ | EN 302 372 V3.1.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised standard for access to radio spectrum; Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz | https://standardsdrift.com/standards/en-302-372-v3-1-1/ | EN 302 448 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-448-v2-1-1/ | EN 302 454 V2.1.1 | Radio Equipment | ended | 2017-12-15 | 2019-05-31 | | 2019-05-31 | Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-454-v2-1-1/ | EN 302 454 V2.2.1 | Radio Equipment | cited | 2018-09-14 | | | 2018-09-14 | Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-454-v2-2-1/ | EN 302 454-2 V1.2.1 | Radio Equipment | ended | 2017-01-13 | 2018-05-31 | | 2018-05-31 | Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-454-2-v1-2-1/ | EN 302 480 V2.1.2 | Radio Equipment | ended | 2017-03-10 | 2023-09-29 | | 2023-09-29 | Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-480-v2-1-2/ | EN 302 480 V2.2.1 | Radio Equipment | ceasing | 2022-03-29 | 2027-06-11 | 2022/498 | 2025-12-11 | Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-480-v2-2-1/ | EN 302 480 V3.1.1 | Radio Equipment | cited | 2025-12-11 | | 2025/2499 | 2025-12-11 | Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-480-v3-1-1/ | EN 302 502 V2.1.1 | Radio Equipment | cited | 2017-05-12 | | | 2017-05-12 | Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-502-v2-1-1/ | EN 302 510-2 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-510-2-v1-1-1/ | EN 302 536-2 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-536-2-v1-1-1/ | EN 302 537 V2.1.1 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-537-v2-1-1/ | EN 302 561 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-561-v2-1-1/ | EN 302 567 V1.2.1 | Radio Equipment | ended | 2017-06-08 | 2023-09-29 | | 2023-09-29 | Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-567-v1-2-1/ | EN 302 567 V2.2.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | Multiple-Gigabit/s radio equipment operating in the 60 GHz band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-567-v2-2-1/ | EN 302 571 V2.1.1 | Radio Equipment | cited | 2017-06-08 | | | 2017-06-08 | Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-571-v2-1-1/ | EN 302 574-1 V2.1.2 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems | https://standardsdrift.com/standards/en-302-574-1-v2-1-2/ | EN 302 574-2 V2.1.2 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems | https://standardsdrift.com/standards/en-302-574-2-v2-1-2/ | EN 302 574-3 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems | https://standardsdrift.com/standards/en-302-574-3-v2-1-1/ | EN 302 608 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment for Eurobalise railway systems;Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-608-v1-1-1/ | EN 302 609 V2.1.1 | Radio Equipment | ended | 2017-06-08 | 2023-01-20 | | 2023-01-20 | Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-609-v2-1-1/ | EN 302 609 V2.2.1 | Radio Equipment | restricted | 2021-07-20 | | 2021/1196 | 2021-07-20 | Short Range Devices (SRD); Radio equipment for Euroloop communication systems; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-609-v2-2-1/ | EN 302 617 V2.3.1 | Radio Equipment | cited | 2018-09-14 | | | 2018-09-14 | Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-302-617-v2-3-1/ | EN 302 617-2 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2019-03-31 | | 2019-03-31 | Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-617-2-v2-1-1/ | EN 302 686 V1.1.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-686-v1-1-1/ | EN 302 729 V2.1.1 | Radio Equipment | ceasing | 2017-05-12 | 2027-06-11 | | 2025-12-11 | Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-729-v2-1-1/ | EN 302 729-1 V3.1.1 | Radio Equipment | cited | 2025-12-11 | | 2025/2499 | 2025-12-11 | Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised standard for access to radio spectrum; Part 1: Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz for strictly vertical downward installation | https://standardsdrift.com/standards/en-302-729-1-v3-1-1/ | EN 302 752 V1.1.1 | Radio Equipment | ended | 2017-06-08 | 2021-02-06 | | 2021-02-06 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-752-v1-1-1/ | EN 302 858-2 V1.3.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM);Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range;Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-302-858-2-v1-3-1/ | EN 302 885 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2018-12-31 | | 2018-12-31 | Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-885-v2-1-1/ | EN 302 885 V2.2.2 | Radio Equipment | ended | 2017-04-12 | 2019-01-31 | | 2019-01-31 | Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-885-v2-2-2/ | EN 302 885 V2.2.3 | Radio Equipment | cited | 2017-05-12 | | | 2017-05-12 | Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-885-v2-2-3/ | EN 302 961 V2.1.2 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-961-v2-1-2/ | EN 302 977 V2.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-302-977-v2-1-1/ | EN 303 039 V2.1.2 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-039-v2-1-2/ | EN 303 084 V2.1.1 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-084-v2-1-1/ | EN 303 098 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2021-02-06 | | 2021-02-06 | Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-098-v2-1-1/ | EN 303 098 V2.2.1 | Radio Equipment | ceasing | 2020-02-06 | 2026-11-15 | 2020/167 | 2025-05-15 | Maritime low power personal locating devices employing AIS; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-098-v2-2-1/ | EN 303 132 V1.1.1 | Radio Equipment | ended | 2017-05-12 | 2025-04-04 | | 2025-04-04 | Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-132-v1-1-1/ | EN 303 132 V2.1.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | Maritime VHF survivor locating devices employing Digital Selective Calling (DSC Class M); Harmonised Standard for access to radio spectrum and for features for emergency services | https://standardsdrift.com/standards/en-303-132-v2-1-1/ | EN 303 135 V2.1.1 | Radio Equipment | ceasing | 2017-01-13 | 2028-03-07 | | 2026-09-28 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-135-v2-1-1/ | EN 303 135 V2.2.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-135-v2-2-1/ | EN 303 203 V2.1.1 | Radio Equipment | cited | 2016-08-12 | | | 2016-08-12 | Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-203-v2-1-1/ | EN 303 204 V2.1.2 | Radio Equipment | ended | 2016-11-11 | 2023-01-20 | | 2023-01-20 | Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-204-v2-1-2/ | EN 303 204 V3.1.1 | Radio Equipment | cited | 2021-07-20 | | 2021/1196 | 2021-07-20 | Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW e.r.p.; Harmonised Standard for access to the radio spectrum | https://standardsdrift.com/standards/en-303-204-v3-1-1/ | EN 303 213-5-1 V1.1.1 | Radio Equipment | ceasing | 2020-10-27 | 2026-11-15 | 2020/1562 | 2025-05-15 | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standard for access to radio spectrum for Multilateration (MLAT) equipment; Sub-part 1: Receivers and Interrogators | https://standardsdrift.com/standards/en-303-213-5-1-v1-1-1/ | EN 303 213-5-1 V2.1.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standard for access to radio spectrum for Multilateration (MLAT) equipment; Sub-part 1: Receivers and Interrogators | https://standardsdrift.com/standards/en-303-213-5-1-v2-1-1/ | EN 303 213-5-2 V1.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standard for access to radio spectrum for Multilateration (MLAT) equipment; Sub-part 2: Reference and Vehicle Transmitters | https://standardsdrift.com/standards/en-303-213-5-2-v1-1-1/ | EN 303 213-6-1 V2.1.1 | Radio Equipment | ended | 2017-01-13 | 2021-10-27 | | 2021-10-27 | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW | https://standardsdrift.com/standards/en-303-213-6-1-v2-1-1/ | EN 303 213-6-1 V3.1.1 | Radio Equipment | restricted | 2020-10-27 | | 2020/1562 | 2020-10-27 | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard for access to radio spectrum for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW | https://standardsdrift.com/standards/en-303-213-6-1-v3-1-1/ | EN 303 258 V1.1.1 | Radio Equipment | restricted | 2021-07-20 | | 2021/1196 | 2021-07-20 | Wireless Industrial Applications (WIA); Equipment operating in the 5 725 MHz to 5 875 MHz frequency range with power levels ranging up to 400 mW; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-258-v1-1-1/ | EN 303 276 V1.1.1 | Radio Equipment | ended | 2017-12-15 | 2023-01-20 | | 2023-01-20 | Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-276-v1-1-1/ | EN 303 276 V1.2.1 | Radio Equipment | cited | 2021-07-20 | | 2021/1196 | 2021-07-20 | Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-276-v1-2-1/ | EN 303 339 V1.1.1 | Radio Equipment | ended | 2016-11-11 | 2021-04-27 | | 2021-04-27 | Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-339-v1-1-1/ | EN 303 340 V1.1.2 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-340-v1-1-2/ | EN 303 345-2 V1.1.1 | Radio Equipment | ended | 2020-10-27 | 2024-05-10 | 2020/1562 | 2024-05-10 | Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-2-v1-1-1/ | EN 303 345-2 V1.2.1 | Radio Equipment | restricted | 2022-11-10 | | 2022/2191 | 2022-11-11 | Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-2-v1-2-1/ | EN 303 345-3 V1.1.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/2191, 2022/498 | 2022-11-11 | Broadcast Sound Receivers; Part 3: FM broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-3-v1-1-1/ | EN 303 345-4 V1.1.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/2191, 2022/498 | 2022-11-11 | Broadcast Sound Receivers; Part 4: DAB broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-4-v1-1-1/ | EN 303 345-5 V1.1.1 | Radio Equipment | ended | 2020-10-27 | 2024-05-10 | 2020/1562 | 2024-05-10 | Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-5-v1-1-1/ | EN 303 345-5 V1.2.1 | Radio Equipment | restricted | 2022-11-10 | | 2022/2191 | 2022-11-11 | Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-345-5-v1-2-1/ | EN 303 347-1 V2.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 1: Meteorological Radar Sensor operating in the frequency band 2 700 MHz to 2 900 MHz (S band) | https://standardsdrift.com/standards/en-303-347-1-v2-1-1/ | EN 303 347-2 V2.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 2: Meteorological Radar Sensor operating in the frequency band 5 250 MHz to 5 850 MHz (C band) | https://standardsdrift.com/standards/en-303-347-2-v2-1-1/ | EN 303 347-3 V2.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 3: Meteorological Radar Sensor operating in the frequency band 9 300 MHz to 9 500 MHz (X band) | https://standardsdrift.com/standards/en-303-347-3-v2-1-1/ | EN 303 348 V1.2.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | Audio frequency induction loop drivers up to 45 amperes in the frequency range 10 Hz to 9 kHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-348-v1-2-1/ | EN 303 354 V1.1.1 | Radio Equipment | ceasing | 2017-05-12 | 2028-03-07 | | 2026-09-28 | Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-354-v1-1-1/ | EN 303 354 V1.2.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-354-v1-2-1/ | EN 303 363-1 V1.1.1 | Radio Equipment | cited | 2022-11-10 | | 2022/2191 | 2022-11-11 | Air Traffic Control Surveillance Radar Sensors; Secondary Surveillance Radar (SSR); Harmonised Standard for access to radio spectrum; Part 1: SSR Interrogator | https://standardsdrift.com/standards/en-303-363-1-v1-1-1/ | EN 303 363-2 V1.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Air Traffic Control Surveillance Radar Sensors; Secondary Surveillance Radar (SSR); Harmonised Standard for access to radio spectrum; Part 2: Far Field Monitor (FFM) | https://standardsdrift.com/standards/en-303-363-2-v1-1-1/ | EN 303 364-1-1 V1.1.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 1: Air Traffic Control (ATC) PSR sensors operating in the frequency band 1 215 MHz to 1 400 MHz (L band); Sub-part 1: radar systems using reflector antennas | https://standardsdrift.com/standards/en-303-364-1-1-v1-1-1/ | EN 303 364-2 V1.1.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/498 | 2022-03-29 | Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 2: Air Traffic Control (ATC) PSR sensors operating in the frequency band 2 700 MHz to 3 100 MHz (S band) | https://standardsdrift.com/standards/en-303-364-2-v1-1-1/ | EN 303 364-3 V1.1.1 | Radio Equipment | restricted | 2020-10-27 | | 2020/1562 | 2020-10-27 | Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500 MHz to 10 000 MHz (X band) | https://standardsdrift.com/standards/en-303-364-3-v1-1-1/ | EN 303 372-1 V1.1.1 | Radio Equipment | ended | 2017-01-13 | 2024-05-10 | | 2024-05-10 | Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band | https://standardsdrift.com/standards/en-303-372-1-v1-1-1/ | EN 303 372-1 V1.2.1 | Radio Equipment | restricted | 2022-03-29 | | 2022/498 | 2022-03-29 | Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-372-1-v1-2-1/ | EN 303 372-2 V1.1.1 | Radio Equipment | ended | 2016-09-09 | 2024-05-10 | | 2024-05-10 | Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU; Part 2: Indoor unit | https://standardsdrift.com/standards/en-303-372-2-v1-1-1/ | EN 303 372-2 V1.2.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-372-2-v1-2-1/ | EN 303 402 V2.1.2 | Radio Equipment | cited | 2017-10-13 | | | 2017-10-13 | Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3(3)(g) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-402-v2-1-2/ | EN 303 406 V1.1.1 | Radio Equipment | cited | 2017-04-12 | | | 2017-04-12 | Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-406-v1-1-1/ | EN 303 413 V1.1.1 | Radio Equipment | ended | 2017-12-15 | 2024-05-10 | | 2024-05-10 | Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of Article 3(2) of Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-413-v1-1-1/ | EN 303 413 V1.2.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-413-v1-2-1/ | EN 303 520 V1.1.1 | Radio Equipment | ended | 2018-09-14 | 2021-08-06 | | 2021-08-06 | Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-520-v1-1-1/ | EN 303 520 V1.2.1 | Radio Equipment | restricted | 2020-02-06 | | 2020/167 | 2020-02-06 | Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-520-v1-2-1/ | EN 303 609 V12.5.1 | Radio Equipment | cited | 2017-01-13 | | | 2017-01-13 | Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-609-v12-5-1/ | EN 303 659 V1.1.1 | Radio Equipment | cited | 2025-12-11 | | 2025/2499 | 2025-12-11 | Short Range Devices (SRD) in Data Networks; Radio equipment to be used in the frequency ranges 865 MHz to 868 MHz and 915 MHz to 919,4 MHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-659-v1-1-1/ | EN 303 661 V1.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Short Range Devices (SRD); Ground Based Synthetic Aperture Radar (GBSAR) in the frequency range 17,1 GHz to 17,3 GHz and High Definition Ground Based Synthetic Aperture Radar (HD-GBSAR) in the frequency range 76 GHz to 77 GHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-661-v1-1-1/ | EN 303 687 V1.1.1 | Radio Equipment | restricted | 2025-05-15 | | 2025/893 | 2025-05-15 | 6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-687-v1-1-1/ | EN 303 753 V1.1.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Wideband Data Transmission Systems (WDTS) for Mobile and Fixed Radio Equipment operating in the 57 - 71 GHz band; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-753-v1-1-1/ | EN 303 758 V1.1.1 | Radio Equipment | cited | 2022-03-29 | | 2022/498 | 2022-03-29 | TETRA radio equipment using non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-758-v1-1-1/ | EN 303 978 V2.1.2 | Radio Equipment | ceasing | 2016-11-11 | 2027-02-14 | | 2025-08-14 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-978-v2-1-2/ | EN 303 978 V2.2.1 | Radio Equipment | cited | 2025-08-14 | | 2025/1741 | 2025-08-14 | Satellite Earth Stations and Systems (SES); Earth Stations on Mobile Platforms (ESOMP) communicating with satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz and 17,3 GHz to 20,2 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-978-v2-2-1/ | EN 303 979 V2.1.2 | Radio Equipment | cited | 2016-11-11 | | | 2016-11-11 | Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of Article 3(2) of the Directive 2014/53/EU | https://standardsdrift.com/standards/en-303-979-v2-1-2/ | EN 303 980 V1.2.1 | Radio Equipment | ended | 2022-03-29 | 2025-04-04 | 2022/498 | 2025-04-04 | Satellite Earth Stations and Systems (SES); Fixed and in-motion Earth Stations communicating with non-geostationary satellite systems (NEST) in the 11 GHz to 14 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-980-v1-2-1/ | EN 303 980 V1.3.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | Satellite Earth Stations and Systems (SES); Fixed and in-motion Earth Stations communicating with non-geostationary satellite systems (NEST) in the 11 GHz to 14 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-980-v1-3-1/ | EN 303 981 V1.2.1 | Radio Equipment | ended | 2022-03-29 | 2025-04-04 | 2022/498 | 2025-04-04 | Satellite Earth Stations and Systems (SES); Fixed and in-motion Wide Band Earth Stations communicating with non-geostationary satellite systems (WBES) in the 11 GHz to 14 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-981-v1-2-1/ | EN 303 981 V1.3.1 | Radio Equipment | cited | 2023-10-04 | | 2023/2392 | 2023-10-04 | Satellite Earth Stations and Systems (SES); Fixed and in-motion Wide Band Earth Stations communicating with non-geostationary satellite systems (WBES) in the 11 GHz to 14 GHz frequency bands; Harmonised Standard for access to radio spectrum | https://standardsdrift.com/standards/en-303-981-v1-3-1/ | EN 303-5:2012 | Machinery | ended | 2012-08-24 | 2023-10-11 | | 2023-10-11 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | https://standardsdrift.com/standards/en-303-5-2012/ | EN 303-5:2021 | Machinery | ended | 2022-04-13 | 2025-02-02 | 2022/621 | 2025-02-02 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | https://standardsdrift.com/standards/en-303-5-2021/ | EN 303-5:2021+A1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | https://standardsdrift.com/standards/en-303-5-2021-a1-2022/ | EN 30326-1:1994 | Machinery | ended | 2009-09-08 | 2017-11-30 | | 2017-11-30 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) | https://standardsdrift.com/standards/en-30326-1-1994/ | EN 30326-1:1994/A1:2007, EN 30326-1:1994/A2:2011 EN 304 220-1 V1.2.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Wideband data transmission SRD; Harmonised Standard for access to radio spectrum; Part 1: Wideband data transmission devices: network access points operating in the frequency bands 863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz | https://standardsdrift.com/standards/en-304-220-1-v1-2-1/ | EN 304 220-2 V1.2.1 | Radio Equipment | cited | 2025-05-15 | | 2025/893 | 2025-05-15 | Wideband data transmission SRD; Harmonised Standard for access to radio spectrum; Part 2: Wideband data transmission devices: terminal node operating in the frequency bands 863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz | https://standardsdrift.com/standards/en-304-220-2-v1-2-1/ | EN 305 550-2 V1.2.1 | Radio Equipment | restricted | 2017-06-08 | | | 2017-06-08 | Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range;Part 2: Harmonized EN covering the essential requirements of Article 3(2) of the R&TTE Directive | https://standardsdrift.com/standards/en-305-550-2-v1-2-1/ | EN 305 550-5 V1.1.1 | Radio Equipment | cited | 2026-09-07 | | 2026/2003 | 2026-09-28 | Short Range Devices (SRD) to be used in the 40 GHz to 260 GHz frequency range; Harmonised Standard for access to radio spectrum; Part 5: Ultra Short Range Communication (USRC) equipment operating within 57 GHz to 64 GHz | https://standardsdrift.com/standards/en-305-550-5-v1-1-1/ | EN 305 550-6 V1.2.1 | Radio Equipment | cited | 2025-12-11 | | 2025/2499 | 2025-12-11 | Short Range Devices (SRD) to be used in the 40 GHz to 260 GHz frequency range; Harmonised Standard for access to radio spectrum; Part 6: Specific radiodetermination applications - Tank Level Probing Radar (TLPR) and Level Probing Radar (LPR) equipment operating in the frequency ranges 116 GHz to 148,5 GHz; 167 GHz to 182 GHz and 231,5 GHz to 250 GHz | https://standardsdrift.com/standards/en-305-550-6-v1-2-1/ | EN 349:1993+A1:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | https://standardsdrift.com/standards/en-349-1993-a1-2008/ | EN 378-2:2008+A1:2009 | Machinery | ended | 2009-09-08 | 2017-11-30 | | 2017-11-30 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | https://standardsdrift.com/standards/en-378-2-2008-a1-2009/ | EN 378-2:2008+A2:2012 | Machinery | ended | 2012-08-24 | 2017-11-30 | | 2017-11-30 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | https://standardsdrift.com/standards/en-378-2-2008-a2-2012/ | EN 378-2:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | https://standardsdrift.com/standards/en-378-2-2016/ | EN 415-10:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 10: General Requirements | https://standardsdrift.com/standards/en-415-10-2014/ | EN 415-1:2000+A1:2009 | Machinery | ended | 2009-09-08 | 2016-02-29 | | 2016-02-29 | Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment | https://standardsdrift.com/standards/en-415-1-2000-a1-2009/ | EN 415-1:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment | https://standardsdrift.com/standards/en-415-1-2014/ | EN 415-2:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Safety of packaging machines - Part 2: Packaging machines for pre-formed rigid containers | https://standardsdrift.com/standards/en-415-2-2025/ | EN 415-3:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2025-02-02 | | 2025-02-02 | Safety of packaging machines - Part 3: Form, fill and seal machines | https://standardsdrift.com/standards/en-415-3-1999-a1-2009/ | EN 415-3:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines | https://standardsdrift.com/standards/en-415-3-2021/ | EN 415-4:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Safety of packaging machines - Part 4: Palletizers and depalletizers and associated equipment | https://standardsdrift.com/standards/en-415-4-2025/ | EN 415-5:2006+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 5: Wrapping machines | https://standardsdrift.com/standards/en-415-5-2006-a1-2009/ | EN 415-6:2006+A1:2009 | Machinery | ended | 2009-12-18 | 2013-11-30 | | 2013-11-30 | Safety of packaging machines - Part 6: Pallet wrapping machines | https://standardsdrift.com/standards/en-415-6-2006-a1-2009/ | EN 415-6:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 6: Pallet wrapping machines | https://standardsdrift.com/standards/en-415-6-2013/ | EN 415-7:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 7: Group and secondary packaging machines | https://standardsdrift.com/standards/en-415-7-2006-a1-2008/ | EN 415-8:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-03-13 | Safety of packaging machines - Part 8: Strapping machines | https://standardsdrift.com/standards/en-415-8-2008/ | EN 415-8:2025 | Machinery | ceasing | 2026-03-13 | 2027-01-20 | 2026/546 | 2026-09-28 | Safety of packaging machines - Part 8: Strapping machines | https://standardsdrift.com/standards/en-415-8-2025/ | EN 415-9:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 | https://standardsdrift.com/standards/en-415-9-2009/ | EN 422:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Plastics and rubber machines - Blow moulding machines - Safety requirements | https://standardsdrift.com/standards/en-422-2009/ | EN 453:2000+A1:2009 | Machinery | ended | 2010-05-26 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Dough mixers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-453-2000-a1-2009/ | EN 453:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Dough mixers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-453-2014/ | EN 454:2000+A1:2009 | Machinery | ended | 2010-05-26 | 2016-02-29 | | 2016-02-29 | Food processing machinery - Planetary mixers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-454-2000-a1-2009/ | EN 454:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Food processing machinery - Planetary mixers - Safety and hygiene requirements | https://standardsdrift.com/standards/en-454-2014/ | EN 474-10:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 10: Requirements for trenchers | https://standardsdrift.com/standards/en-474-10-2006-a1-2009/ | EN 474-10:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 10: Requirements for trenchers | https://standardsdrift.com/standards/en-474-10-2022/ | EN 474-11:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors | https://standardsdrift.com/standards/en-474-11-2006-a1-2008/ | EN 474-11:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors | https://standardsdrift.com/standards/en-474-11-2022/ | EN 474-12:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators | https://standardsdrift.com/standards/en-474-12-2006-a1-2008/ | EN 474-12:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators | https://standardsdrift.com/standards/en-474-12-2022/ | EN 474-13:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 13: Requirements for rollers | https://standardsdrift.com/standards/en-474-13-2022/ | EN 474-1:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2013-11-28 | | 2013-11-28 | Earth-moving machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-474-1-2006-a1-2009/ | EN 474-1:2006+A4:2013 | Machinery | ended | 2013-11-28 | 2020-09-19 | | 2020-09-19 | Earth-moving machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-474-1-2006-a4-2013/ | EN 474-1:2006+A4:2013/AC:2014 EN 474-1:2006+A5:2018 | Machinery | ended | 2019-03-19 | 2021-10-15 | 2019/436 | 2021-10-15 | Earth-moving machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-474-1-2006-a5-2018/ | EN 474-1:2006+A6:2019 | Machinery | ended | 2021-10-15 | 2025-02-02 | 2021/1813, 2022/621 | 2025-02-02 | Earth-moving machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-474-1-2006-a6-2019/ | EN 474-1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586, 2026/546 | 2026-09-28 | Earth-moving machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-474-1-2022/ | EN 474-2:2006+A1:2008 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers | https://standardsdrift.com/standards/en-474-2-2006-a1-2008/ | EN 474-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers | https://standardsdrift.com/standards/en-474-2-2022/ | EN 474-3:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 3: Requirements for loaders | https://standardsdrift.com/standards/en-474-3-2006-a1-2009/ | EN 474-3:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 3: Requirements for loaders | https://standardsdrift.com/standards/en-474-3-2022/ | EN 474-3:2022/AC:2022 EN 474-4:2006+A2:2012 | Machinery | ended | 2012-03-23 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders | https://standardsdrift.com/standards/en-474-4-2006-a2-2012/ | EN 474-4:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders | https://standardsdrift.com/standards/en-474-4-2022/ | EN 474-5:2006+A1:2009 | Machinery | ended | 2012-03-23 | 2014-01-31 | | 2014-01-31 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators | https://standardsdrift.com/standards/en-474-5-2006-a1-2009/ | EN 474-5:2006+A3:2013 | Machinery | ended | 2013-11-28 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators | https://standardsdrift.com/standards/en-474-5-2006-a3-2013/ | EN 474-5:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators | https://standardsdrift.com/standards/en-474-5-2022/ | EN 474-5:2022/AC:2022 EN 474-6:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers | https://standardsdrift.com/standards/en-474-6-2006-a1-2009/ | EN 474-6:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers | https://standardsdrift.com/standards/en-474-6-2022/ | EN 474-7:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 7: Requirements for scrapers | https://standardsdrift.com/standards/en-474-7-2006-a1-2009/ | EN 474-7:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 7: Requirements for scrapers | https://standardsdrift.com/standards/en-474-7-2022/ | EN 474-8:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 8: Requirements for graders | https://standardsdrift.com/standards/en-474-8-2006-a1-2009/ | EN 474-8:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 8: Requirements for graders | https://standardsdrift.com/standards/en-474-8-2022/ | EN 474-9:2006+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Earth-moving machinery - Safety - Part 9: Requirements for pipelayers | https://standardsdrift.com/standards/en-474-9-2006-a1-2009/ | EN 474-9:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Earth-moving machinery - Safety - Part 9: Requirements for pipelayers | https://standardsdrift.com/standards/en-474-9-2022/ | EN 500-1:2006+A1:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Mobile road construction machinery - Safety - Part 1: Common requirements | https://standardsdrift.com/standards/en-500-1-2006-a1-2009/ | EN 500-2:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines | https://standardsdrift.com/standards/en-500-2-2006-a1-2008/ | EN 500-3:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines | https://standardsdrift.com/standards/en-500-3-2006-a1-2008/ | EN 500-4:2011 | Machinery | ended | 2011-07-20 | 2025-02-02 | | 2025-02-02 | Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines | https://standardsdrift.com/standards/en-500-4-2011/ | EN 500-6:2006+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers | https://standardsdrift.com/standards/en-500-6-2006-a1-2008/ | EN 50059:2025 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Hand-held electrostatic application equipment for non-ignitable liquid coating materials - Safety requirements | https://standardsdrift.com/standards/en-50059-2025/ | EN 50176:2025 | Machinery | ceasing | 2025-08-14 | 2027-01-20 | 2025/1740 | 2026-09-28 | Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements | https://standardsdrift.com/standards/en-50176-2025/ | EN 50223:2010 | Machinery | ended | 2010-10-20 | 2018-04-13 | | 2018-04-13 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements | https://standardsdrift.com/standards/en-50223-2010/ | EN 50223:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements | https://standardsdrift.com/standards/en-50223-2015/ | EN 50348:2010 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements | https://standardsdrift.com/standards/en-50348-2010/ | EN 50348:2010/AC:2010 EN 50360:2017 | Radio Equipment | cited | 2017-11-17 | 2025-06-01 | 2023/2669 | 2025-06-01 | Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear | https://standardsdrift.com/standards/en-50360-2017/ | EN 50360:2017/A1:2023 EN 50374:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Conductor cars | https://standardsdrift.com/standards/en-50374-2025/ | EN 50374:2025/A1:2025 EN 50385:2017 | Radio Equipment | cited | 2017-11-17 | | | 2017-11-17 | Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market | https://standardsdrift.com/standards/en-50385-2017/ | EN 50401:2017 | Radio Equipment | cited | 2017-11-17 | | | 2017-11-17 | Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service | https://standardsdrift.com/standards/en-50401-2017/ | EN 50434:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | 2026/80 | 2026-09-28 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers | https://standardsdrift.com/standards/en-50434-2014/ | EN 50566:2017 | Radio Equipment | ceasing | 2017-11-17 | 2028-03-07 | 2023/2669, 2026/2003 | 2026-09-28 | Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body | https://standardsdrift.com/standards/en-50566-2017/ | EN 50566:2017/A1:2023, EN 50566:2017/A2:2025 EN 50569:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | 2019/436 | 2026-09-28 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | https://standardsdrift.com/standards/en-50569-2013/ | EN 50569:2013/A1:2018 EN 50570:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | 2019/436 | 2026-09-28 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | https://standardsdrift.com/standards/en-50570-2013/ | EN 50570:2013/A1:2018 EN 50571:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | 2019/436 | 2026-09-28 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | https://standardsdrift.com/standards/en-50571-2013/ | EN 50571:2013/A1:2018 EN 50580:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | | 2026-09-28 | Safety of hand-held electric motor operated tools - Particular requirements for spray guns | https://standardsdrift.com/standards/en-50580-2012/ | EN 50580:2012/A1:2013 EN 50636-2-100:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums | https://standardsdrift.com/standards/en-50636-2-100-2014/ | EN 50636-2-107:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | 2019/436, 2021/377, 2022/621 | 2026-09-28 | Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | https://standardsdrift.com/standards/en-50636-2-107-2015/ | EN 50636-2-107:2015/A1:2018, EN 50636-2-107:2015/A2:2020, EN 50636-2-107:2015/A3:2021 EN 50636-2-91:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers | https://standardsdrift.com/standards/en-50636-2-91-2014/ | EN 50636-2-92:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators | https://standardsdrift.com/standards/en-50636-2-92-2014/ | EN 50636-2-94:2014 | Machinery | ceasing | 2015-02-13 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears | https://standardsdrift.com/standards/en-50636-2-94-2014/ | EN 50689:2021 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Safety of laser products - Particular Requirements for Consumer Laser Products | https://standardsdrift.com/standards/en-50689-2021/ | EN 528:2008 | Machinery | ended | 2009-09-08 | 2024-02-02 | | 2024-02-02 | Rail dependent storage and retrieval equipment - Safety requirements | https://standardsdrift.com/standards/en-528-2008/ | EN 528:2021+A1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Rail dependent storage and retrieval equipment - Safety requirements for S/R machines | https://standardsdrift.com/standards/en-528-2021-a1-2022/ | EN 536:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Road construction machines - Mixing plants for road construction materials - Safety requirements | https://standardsdrift.com/standards/en-536-2015/ | EN 547-1:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery | https://standardsdrift.com/standards/en-547-1-1996-a1-2008/ | EN 547-2:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings | https://standardsdrift.com/standards/en-547-2-1996-a1-2008/ | EN 547-3:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Human body measurements - Part 3: Anthropometric data | https://standardsdrift.com/standards/en-547-3-1996-a1-2008/ | EN 55035:2017 | Radio Equipment | cited | 2017-11-17 | | | 2017-11-17 | Electromagnetic compatibility of multimedia equipment - Immunity requirements | https://standardsdrift.com/standards/en-55035-2017/ | EN 574:1996+A1:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design | https://standardsdrift.com/standards/en-574-1996-a1-2008/ | EN 60204-11:2000 | Machinery | ended | 2010-05-26 | 2021-10-02 | | 2026-09-28 | Safety of machinery - Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | https://standardsdrift.com/standards/en-60204-11-2000/ | EN 60204-11:2000/AC:2010 EN 60204-1:2006 | Machinery | ended | 2010-05-26 | 2021-10-02 | | 2026-09-28 | Safety of machinery - Electrical equipment of machines -- Part 1: General requirements | https://standardsdrift.com/standards/en-60204-1-2006/ | EN 60204-1:2006/A1:2009, EN 60204-1:2006/AC:2010 EN 60204-1:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements | https://standardsdrift.com/standards/en-60204-1-2018/ | EN 60204-31:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems | https://standardsdrift.com/standards/en-60204-31-2013/ | EN 60204-32:2008 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines | https://standardsdrift.com/standards/en-60204-32-2008/ | EN 60204-33:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment | https://standardsdrift.com/standards/en-60204-33-2011/ | EN 60335-1:2002 | Machinery | ended | 2010-10-20 | 2014-11-21 | | 2026-09-28 | Household and similar electrical appliances - Safety -- Part 1: General requirements | https://standardsdrift.com/standards/en-60335-1-2002/ | EN 60335-1:2002/A11:2004, EN 60335-1:2002/A12:2006, EN 60335-1:2002/A12:2006/AC:2007, EN 60335-1:2002/A13:2008, EN 60335-1:2002/A14:2010, EN 60335-1:2002/A15:2011, EN 60335-1:2002/A1:2004, EN 60335-1:2002/A1:2004/AC:2007, EN 60335-1:2002/AC:2009, EN 60335-1:2002/AC:2010 EN 60335-1:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | 2019/436, 2022/621 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-60335-1-2012/ | EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A15:2021, EN 60335-1:2012/AC:2014 EN 60335-2-102:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | https://standardsdrift.com/standards/en-60335-2-102-2016/ | EN 60335-2-103:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows | https://standardsdrift.com/standards/en-60335-2-103-2015/ | EN 60335-2-23:2003 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care | https://standardsdrift.com/standards/en-60335-2-23-2003/ | EN 60335-2-23:2003/A2:2015 EN 60335-2-36:2002 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements | https://standardsdrift.com/standards/en-60335-2-36-2002/ | EN 60335-2-36:2002/A11:2012, EN 60335-2-36:2002/AC:2007 EN 60335-2-37:2002 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers | https://standardsdrift.com/standards/en-60335-2-37-2002/ | EN 60335-2-37:2002/A11:2012, EN 60335-2-37:2002/A12:2016, EN 60335-2-37:2002/AC:2007 EN 60335-2-38:2003 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills | https://standardsdrift.com/standards/en-60335-2-38-2003/ | EN 60335-2-38:2003/A11:2024, EN 60335-2-38:2003/A1:2008, EN 60335-2-38:2003/A2:2024, EN 60335-2-38:2003/corrigendum Aug. 2007 EN 60335-2-40:2003 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | https://standardsdrift.com/standards/en-60335-2-40-2003/ | EN 60335-2-40:2003/A11:2004, EN 60335-2-40:2003/A12:2005, EN 60335-2-40:2003/A13:2012, EN 60335-2-40:2003/A13:2012/AC:2013, EN 60335-2-40:2003/A1:2006, EN 60335-2-40:2003/A2:2009, EN 60335-2-40:2003/AC:2006, EN 60335-2-40:2003/AC:2010 EN 60335-2-42:2003 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens | https://standardsdrift.com/standards/en-60335-2-42-2003/ | EN 60335-2-42:2003/A11:2012, EN 60335-2-42:2003/AC:2007 EN 60335-2-47:2003 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans | https://standardsdrift.com/standards/en-60335-2-47-2003/ | EN 60335-2-47:2003/A11:2012, EN 60335-2-47:2003/AC:2007 EN 60335-2-48:2003 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters | https://standardsdrift.com/standards/en-60335-2-48-2003/ | EN 60335-2-48:2003/A11:2012, EN 60335-2-48:2003/AC:2007 EN 60335-2-49:2003 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm | https://standardsdrift.com/standards/en-60335-2-49-2003/ | EN 60335-2-49:2003/A11:2012, EN 60335-2-49:2003/AC:2007 EN 60335-2-58:2005 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | https://standardsdrift.com/standards/en-60335-2-58-2005/ | EN 60335-2-58:2005/A12:2016, EN 60335-2-58:2005/A2:2015 EN 60335-2-65:2003 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances | https://standardsdrift.com/standards/en-60335-2-65-2003/ | EN 60335-2-65:2003/A11:2012 EN 60335-2-67:2009 | Machinery | ended | 2009-12-18 | 2015-05-03 | | 2015-05-03 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use | https://standardsdrift.com/standards/en-60335-2-67-2009/ | EN 60335-2-67:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use | https://standardsdrift.com/standards/en-60335-2-67-2012/ | EN 60335-2-68:2009 | Machinery | ended | 2009-12-18 | 2015-05-03 | | 2015-05-03 | Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use | https://standardsdrift.com/standards/en-60335-2-68-2009/ | EN 60335-2-68:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use | https://standardsdrift.com/standards/en-60335-2-68-2012/ | EN 60335-2-69:2009 | Machinery | ended | 2009-12-18 | 2015-03-28 | | 2015-03-28 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use | https://standardsdrift.com/standards/en-60335-2-69-2009/ | EN 60335-2-69:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use | https://standardsdrift.com/standards/en-60335-2-69-2012/ | EN 60335-2-72:2009 | Machinery | ended | 2009-12-18 | 2015-05-03 | | 2015-05-03 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use | https://standardsdrift.com/standards/en-60335-2-72-2009/ | EN 60335-2-72:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use | https://standardsdrift.com/standards/en-60335-2-72-2012/ | EN 60335-2-77:2010 | Machinery | ended | 2011-04-08 | 2025-02-02 | | 2025-02-02 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers | https://standardsdrift.com/standards/en-60335-2-77-2010/ | EN 60335-2-79:2009 | Machinery | ended | 2009-12-18 | 2015-04-03 | | 2015-04-03 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners | https://standardsdrift.com/standards/en-60335-2-79-2009/ | EN 60335-2-79:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners | https://standardsdrift.com/standards/en-60335-2-79-2012/ | EN 60335-2-89:2010 | Machinery | ended | 2016-09-09 | 2025-02-02 | | 2026-09-28 | Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor | https://standardsdrift.com/standards/en-60335-2-89-2010/ | EN 60335-2-89:2010/A1:2016, EN 60335-2-89:2010/A2:2017 EN 60335-2-8:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances | https://standardsdrift.com/standards/en-60335-2-8-2015/ | EN 60335-2-8:2015/A1:2016 EN 60335-2-95:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use | https://standardsdrift.com/standards/en-60335-2-95-2015/ | EN 60335-2-95:2015/A1:2015 EN 60335-2-97:2006 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment | https://standardsdrift.com/standards/en-60335-2-97-2006/ | EN 60335-2-97:2006/A12:2015 EN 60519-1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements | https://standardsdrift.com/standards/en-60519-1-2015/ | EN 60745-1:2009 | Machinery | ended | 2009-12-18 | 2021-12-15 | | 2021-12-15 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-60745-1-2009/ | EN 60745-1:2009/A11:2010, EN 60745-1:2009/AC:2009 EN 60745-2-11:2010 | Machinery | ended | 2010-10-20 | 2019-12-23 | | 2019-12-23 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) | https://standardsdrift.com/standards/en-60745-2-11-2010/ | EN 60745-2-12:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators | https://standardsdrift.com/standards/en-60745-2-12-2009/ | EN 60745-2-13:2009 | Machinery | ended | 2009-12-18 | 2023-05-03 | | 2023-05-03 | Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws | https://standardsdrift.com/standards/en-60745-2-13-2009/ | EN 60745-2-13:2009/A1:2010 EN 60745-2-14:2009 | Machinery | ended | 2009-12-18 | 2019-08-31 | | 2019-08-31 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers | https://standardsdrift.com/standards/en-60745-2-14-2009/ | EN 60745-2-14:2009/A2:2010 EN 60745-2-15:2009 | Machinery | ended | 2009-12-18 | 2025-02-02 | | 2025-02-02 | Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers | https://standardsdrift.com/standards/en-60745-2-15-2009/ | EN 60745-2-15:2009/A1:2010 EN 60745-2-16:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers | https://standardsdrift.com/standards/en-60745-2-16-2010/ | EN 60745-2-17:2010 | Machinery | ended | 2011-04-08 | 2021-12-15 | | 2021-12-15 | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers | https://standardsdrift.com/standards/en-60745-2-17-2010/ | EN 60745-2-18:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools | https://standardsdrift.com/standards/en-60745-2-18-2009/ | EN 60745-2-19:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers | https://standardsdrift.com/standards/en-60745-2-19-2009/ | EN 60745-2-19:2009/A1:2010 EN 60745-2-1:2010 | Machinery | ended | 2010-10-20 | 2022-01-19 | | 2022-01-19 | Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills | https://standardsdrift.com/standards/en-60745-2-1-2010/ | EN 60745-2-20:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws | https://standardsdrift.com/standards/en-60745-2-20-2009/ | EN 60745-2-21:2009 | Machinery | ended | 2009-12-18 | 2021-10-02 | | 2021-10-02 | Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners | https://standardsdrift.com/standards/en-60745-2-21-2009/ | EN 60745-2-21:2009/A1:2010 EN 60745-2-22:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines | https://standardsdrift.com/standards/en-60745-2-22-2011/ | EN 60745-2-22:2011/A11:2013 EN 60745-2-23:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools | https://standardsdrift.com/standards/en-60745-2-23-2013/ | EN 60745-2-2:2010 | Machinery | ended | 2010-10-20 | 2019-08-21 | | 2019-08-21 | Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches | https://standardsdrift.com/standards/en-60745-2-2-2010/ | EN 60745-2-3:2011 | Machinery | ended | 2011-11-18 | 2025-02-02 | | 2025-02-02 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | https://standardsdrift.com/standards/en-60745-2-3-2011/ | EN 60745-2-3:2011/A11:2014, EN 60745-2-3:2011/A12:2014, EN 60745-2-3:2011/A13:2015, EN 60745-2-3:2011/A2:2013 EN 60745-2-4:2009 | Machinery | ended | 2010-05-26 | 2019-08-21 | | 2019-08-21 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type | https://standardsdrift.com/standards/en-60745-2-4-2009/ | EN 60745-2-4:2009/A11:2011 EN 60745-2-5:2010 | Machinery | ended | 2011-04-08 | 2019-08-21 | | 2019-08-21 | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws | https://standardsdrift.com/standards/en-60745-2-5-2010/ | EN 60745-2-6:2010 | Machinery | ended | 2010-10-20 | 2023-04-15 | | 2023-04-15 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers | https://standardsdrift.com/standards/en-60745-2-6-2010/ | EN 60745-2-8:2009 | Machinery | ended | 2009-12-18 | 2020-05-02 | | 2020-05-02 | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers | https://standardsdrift.com/standards/en-60745-2-8-2009/ | EN 60745-2-9:2009 | Machinery | ended | 2009-12-18 | 2019-08-21 | | 2019-08-21 | Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers | https://standardsdrift.com/standards/en-60745-2-9-2009/ | EN 609-1:1999+A2:2009 | Machinery | ended | 2009-12-18 | 2018-06-30 | | 2018-06-30 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters | https://standardsdrift.com/standards/en-609-1-1999-a2-2009/ | EN 609-1:2017 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters | https://standardsdrift.com/standards/en-609-1-2017/ | EN 609-2:1999+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters | https://standardsdrift.com/standards/en-609-2-1999-a1-2009/ | EN 60947-5-3:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | https://standardsdrift.com/standards/en-60947-5-3-2013/ | EN 60947-5-5:1997 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | https://standardsdrift.com/standards/en-60947-5-5-1997/ | EN 60947-5-5:1997/A11:2013, EN 60947-5-5:1997/A1:2005, EN 60947-5-5:1997/A2:2017 EN 61029-1:2009 | Machinery | ended | 2009-12-18 | 2021-12-15 | | 2021-12-15 | Safety of transportable motor-operated electric tools - Part 1: General requirements | https://standardsdrift.com/standards/en-61029-1-2009/ | EN 61029-1:2009/A11:2010, EN 61029-1:2009/AC:2009 EN 61029-2-10:2010 | Machinery | ended | 2010-10-20 | 2019-10-19 | | 2019-10-19 | Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders | https://standardsdrift.com/standards/en-61029-2-10-2010/ | EN 61029-2-10:2010/A11:2013 EN 61029-2-11:2009 | Machinery | ended | 2009-12-18 | 2015-09-03 | | 2015-09-03 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws | https://standardsdrift.com/standards/en-61029-2-11-2009/ | EN 61029-2-11:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws | https://standardsdrift.com/standards/en-61029-2-11-2012/ | EN 61029-2-11:2012/A11:2013 EN 61029-2-12:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines | https://standardsdrift.com/standards/en-61029-2-12-2011/ | EN 61029-2-1:2010 | Machinery | ended | 2010-10-20 | 2015-09-03 | | 2015-09-03 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches | https://standardsdrift.com/standards/en-61029-2-1-2010/ | EN 61029-2-1:2012 | Machinery | ended | 2013-04-05 | 2019-08-21 | | 2019-08-21 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches | https://standardsdrift.com/standards/en-61029-2-1-2012/ | EN 61029-2-3:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers | https://standardsdrift.com/standards/en-61029-2-3-2011/ | EN 61029-2-4:2011 | Machinery | ended | 2011-11-18 | 2020-06-24 | | 2020-06-24 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders | https://standardsdrift.com/standards/en-61029-2-4-2011/ | EN 61029-2-5:2011 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws | https://standardsdrift.com/standards/en-61029-2-5-2011/ | EN 61029-2-5:2011/A11:2015 EN 61029-2-6:2010 | Machinery | ended | 2010-10-20 | 2019-08-21 | | 2019-08-21 | Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply | https://standardsdrift.com/standards/en-61029-2-6-2010/ | EN 61029-2-8:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders | https://standardsdrift.com/standards/en-61029-2-8-2010/ | EN 61029-2-9:2009 | Machinery | ended | 2009-12-18 | 2015-09-03 | | 2015-09-03 | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws | https://standardsdrift.com/standards/en-61029-2-9-2009/ | EN 61029-2-9:2012 | Machinery | ended | 2013-04-05 | 2019-11-15 | | 2019-11-15 | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws | https://standardsdrift.com/standards/en-61029-2-9-2012/ | EN 61029-2-9:2012/A11:2013 EN 61310-1:2008 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals | https://standardsdrift.com/standards/en-61310-1-2008/ | EN 61310-2:2008 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking | https://standardsdrift.com/standards/en-61310-2-2008/ | EN 61310-3:2008 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators | https://standardsdrift.com/standards/en-61310-3-2008/ | EN 614-1:2006+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles | https://standardsdrift.com/standards/en-614-1-2006-a1-2009/ | EN 614-2:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks | https://standardsdrift.com/standards/en-614-2-2000-a1-2008/ | EN 61496-1:2004 | Machinery | ended | 2010-05-26 | 2015-05-10 | | 2026-09-28 | Safety of machinery - Electro-sensitive protective equipment -- Part 1: General requirements and tests | https://standardsdrift.com/standards/en-61496-1-2004/ | EN 61496-1:2004/A1:2008, EN 61496-1:2004/AC:2010 EN 61496-1:2013 | Machinery | ended | 2014-04-11 | 2020-09-19 | | 2020-09-19 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests | https://standardsdrift.com/standards/en-61496-1-2013/ | EN 617:2001+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers | https://standardsdrift.com/standards/en-617-2001-a1-2010/ | EN 61800-5-2:2007 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Adjustable speed electrical power drive systems -- Part 5-2: Safety requirements - Functional | https://standardsdrift.com/standards/en-61800-5-2-2007/ | EN 618:2002+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors | https://standardsdrift.com/standards/en-618-2002-a1-2010/ | EN 619:2002+A1:2010 | Machinery | ended | 2011-04-08 | 2025-02-02 | | 2025-02-02 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads | https://standardsdrift.com/standards/en-619-2002-a1-2010/ | EN 619:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads | https://standardsdrift.com/standards/en-619-2022/ | EN 62061:2005 | Machinery | ended | 2010-05-26 | 2023-10-11 | | 2023-10-11 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | https://standardsdrift.com/standards/en-62061-2005/ | EN 62061:2005/A1:2013, EN 62061:2005/A2:2015, EN 62061:2005/AC:2010 EN 620:2002+A1:2010 | Machinery | ended | 2011-04-08 | 2025-02-02 | | 2025-02-02 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials | https://standardsdrift.com/standards/en-620-2002-a1-2010/ | EN 620:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials | https://standardsdrift.com/standards/en-620-2021/ | EN 626-1:1994+A1:2008 | Machinery | ended | 2009-09-08 | 2016-05-31 | | 2016-05-31 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers | https://standardsdrift.com/standards/en-626-1-1994-a1-2008/ | EN 626-2:1996+A1:2008 | Machinery | ended | 2009-09-08 | 2016-06-30 | | 2016-06-30 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures | https://standardsdrift.com/standards/en-626-2-1996-a1-2008/ | EN 62745:2017 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Safety of machinery - Requirements for cableless control systems of machinery | https://standardsdrift.com/standards/en-62745-2017/ | EN 62745:2017/A11:2020 EN 62841-1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | 2023/1586, 2024/1256 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | https://standardsdrift.com/standards/en-62841-1-2015/ | EN 62841-1:2015/A11:2022, EN 62841-1:2015/AC:2015 EN 62841-2-10:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers | https://standardsdrift.com/standards/en-62841-2-10-2017/ | EN 62841-2-11:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | 2021/377, 2024/1256, 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | https://standardsdrift.com/standards/en-62841-2-11-2016/ | EN 62841-2-11:2016/A11:2024, EN 62841-2-11:2016/A1:2020 EN 62841-2-14:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers | https://standardsdrift.com/standards/en-62841-2-14-2015/ | EN 62841-2-17:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers | https://standardsdrift.com/standards/en-62841-2-17-2017/ | EN 62841-2-1:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436, 2020/480, 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills | https://standardsdrift.com/standards/en-62841-2-1-2018/ | EN 62841-2-1:2018/A11:2019, EN 62841-2-1:2018/A12:2022, EN 62841-2-1:2018/A1:2022 EN 62841-2-21:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners | https://standardsdrift.com/standards/en-62841-2-21-2019/ | EN 62841-2-2:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) | https://standardsdrift.com/standards/en-62841-2-2-2014/ | EN 62841-2-2:2014/AC:2015 EN 62841-2-4:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) | https://standardsdrift.com/standards/en-62841-2-4-2014/ | EN 62841-2-4:2014/AC:2015 EN 62841-2-5:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) | https://standardsdrift.com/standards/en-62841-2-5-2014/ | EN 62841-2-8:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers | https://standardsdrift.com/standards/en-62841-2-8-2016/ | EN 62841-2-9:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders | https://standardsdrift.com/standards/en-62841-2-9-2015/ | EN 62841-2-9:2015/AC:2016-10 EN 62841-3-10:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | 2019/436, 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | https://standardsdrift.com/standards/en-62841-3-10-2015/ | EN 62841-3-10:2015/A11:2017, EN 62841-3-10:2015/A12:2022, EN 62841-3-10:2015/A1:2022, EN 62841-3-10:2015/AC:2016-07 EN 62841-3-12:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines | https://standardsdrift.com/standards/en-62841-3-12-2019/ | EN 62841-3-13:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills | https://standardsdrift.com/standards/en-62841-3-13-2017/ | EN 62841-3-14:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners | https://standardsdrift.com/standards/en-62841-3-14-2017/ | EN 62841-3-1:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | 2019/436, 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | https://standardsdrift.com/standards/en-62841-3-1-2014/ | EN 62841-3-1:2014/A11:2017, EN 62841-3-1:2014/A12:2021, EN 62841-3-1:2014/A1:2021, EN 62841-3-1:2014/AC:2015 EN 62841-3-4:2016 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436, 2021/377 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | https://standardsdrift.com/standards/en-62841-3-4-2016/ | EN 62841-3-4:2016/A11:2017, EN 62841-3-4:2016/A12:2020, EN 62841-3-4:2016/A1:2020 EN 62841-3-6:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | 2019/436, 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | https://standardsdrift.com/standards/en-62841-3-6-2014/ | EN 62841-3-6:2014/A11:2017, EN 62841-3-6:2014/A12:2022, EN 62841-3-6:2014/A1:2022, EN 62841-3-6:2014/AC:2015 EN 62841-3-9:2015 | Machinery | ended | 2016-05-13 | 2022-09-03 | 2019/436 | 2022-09-03 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | https://standardsdrift.com/standards/en-62841-3-9-2015/ | EN 62841-3-9:2015/A11:2017, EN 62841-3-9:2015/AC:2016-09 EN 62841-4-1:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws | https://standardsdrift.com/standards/en-62841-4-1-2020/ | EN 62841-4-2:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480, 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers | https://standardsdrift.com/standards/en-62841-4-2-2019/ | EN 62841-4-2:2019/A11:2022, EN 62841-4-2:2019/A1:2022 EN 676:2003+A2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Automatic forced draught burners for gaseous fuels | https://standardsdrift.com/standards/en-676-2003-a2-2008/ | EN 676:2003+A2:2008/AC:2008 EN 690:1994+A1:2009 | Machinery | ended | 2009-12-18 | 2014-04-30 | | 2014-04-30 | Agricultural machinery - Manure spreaders - Safety | https://standardsdrift.com/standards/en-690-1994-a1-2009/ | EN 690:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Manure spreaders - Safety | https://standardsdrift.com/standards/en-690-2013/ | EN 692:2005+A1:2009 | Machinery | ended | 2009-09-08 | 2021-09-19 | | 2021-09-19 | Machine tools - Mechanical presses - Safety | https://standardsdrift.com/standards/en-692-2005-a1-2009/ | EN 693:2001+A1:2009 | Machinery | ended | 2009-09-08 | 2012-03-31 | | 2012-03-31 | Machine tools - Safety - Hydraulic presses | https://standardsdrift.com/standards/en-693-2001-a1-2009/ | EN 693:2001+A2:2011 | Machinery | ended | 2011-11-18 | 2021-03-19 | | 2021-03-19 | Machine tools - Safety - Hydraulic presses | https://standardsdrift.com/standards/en-693-2001-a2-2011/ | EN 703:2004+A1:2009 | Machinery | ended | 2009-12-18 | 2025-02-02 | | 2025-02-02 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety | https://standardsdrift.com/standards/en-703-2004-a1-2009/ | EN 703:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines | https://standardsdrift.com/standards/en-703-2021/ | EN 704:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2011-06-30 | | 2011-06-30 | Agricultural machinery - Pick-up balers - Safety | https://standardsdrift.com/standards/en-704-1999-a1-2009/ | EN 706:1996+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Vine shoot tipping machines - Safety | https://standardsdrift.com/standards/en-706-1996-a1-2009/ | EN 707:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2021-10-02 | | 2021-10-02 | Agricultural machinery - Slurry tankers - Safety | https://standardsdrift.com/standards/en-707-1999-a1-2009/ | EN 707:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Agricultural machinery - Slurry tankers - Safety | https://standardsdrift.com/standards/en-707-2018/ | EN 709:1997+A2:2009 | Machinery | ended | 2009-09-08 | 2010-12-31 | | 2010-12-31 | Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety | https://standardsdrift.com/standards/en-709-1997-a2-2009/ | EN 709:1997+A4:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety | https://standardsdrift.com/standards/en-709-1997-a4-2009/ | EN 709:1997+A4:2009/AC:2012 EN 710:1997+A1:2010 | Machinery | ended | 2010-10-20 | 2025-02-02 | | 2025-02-02 | Safety requirements for foundry moulding and coremaking machinery and plant associated equipment | https://standardsdrift.com/standards/en-710-1997-a1-2010/ | EN 710:1997+A1:2010/AC:2012 EN 716-1:2017+AC:2019 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements | https://standardsdrift.com/standards/en-716-1-2017-ac-2019/ | EN 741:2000+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials | https://standardsdrift.com/standards/en-741-2000-a1-2010/ | EN 745:1999+A1:2009 | Machinery | ended | 2009-12-18 | 2012-12-31 | | 2012-12-31 | Agricultural machinery - Rotary mowers and flail-mowers - Safety | https://standardsdrift.com/standards/en-745-1999-a1-2009/ | EN 746-1:1997+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment | https://standardsdrift.com/standards/en-746-1-1997-a1-2009/ | EN 746-2:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems | https://standardsdrift.com/standards/en-746-2-2010/ | EN 746-3:1997+A1:2009 | Machinery | ended | 2009-09-08 | 2025-02-02 | | 2025-02-02 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases | https://standardsdrift.com/standards/en-746-3-1997-a1-2009/ | EN 746-3:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases | https://standardsdrift.com/standards/en-746-3-2021/ | EN 786:1996+A2:2009 | Machinery | ended | 2009-12-18 | 2020-09-19 | | 2020-09-19 | Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety | https://standardsdrift.com/standards/en-786-1996-a2-2009/ | EN 791:1995+A1:2009 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Drill rigs - Safety | https://standardsdrift.com/standards/en-791-1995-a1-2009/ | EN 792-10:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools | https://standardsdrift.com/standards/en-792-10-2000-a1-2008/ | EN 792-11:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears | https://standardsdrift.com/standards/en-792-11-2000-a1-2008/ | EN 792-12:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2013-06-30 | | 2013-06-30 | Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws | https://standardsdrift.com/standards/en-792-12-2000-a1-2008/ | EN 792-13:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2021-10-02 | | 2021-10-02 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools | https://standardsdrift.com/standards/en-792-13-2000-a1-2008/ | EN 792-1:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2012-08-24 | | 2012-08-24 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners | https://standardsdrift.com/standards/en-792-1-2000-a1-2008/ | EN 792-2:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools | https://standardsdrift.com/standards/en-792-2-2000-a1-2008/ | EN 792-3:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2011-04-30 | | 2011-04-30 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers | https://standardsdrift.com/standards/en-792-3-2000-a1-2008/ | EN 792-4:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2011-04-30 | | 2011-04-30 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools | https://standardsdrift.com/standards/en-792-4-2000-a1-2008/ | EN 792-5:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills | https://standardsdrift.com/standards/en-792-5-2000-a1-2008/ | EN 792-6:2000+A1:2008 | Machinery | ended | 2009-09-08 | 2011-04-30 | | 2011-04-30 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners | https://standardsdrift.com/standards/en-792-6-2000-a1-2008/ | EN 792-7:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2013-02-28 | | 2013-02-28 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders | https://standardsdrift.com/standards/en-792-7-2001-a1-2008/ | EN 792-8:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers | https://standardsdrift.com/standards/en-792-8-2001-a1-2008/ | EN 792-9:2001+A1:2008 | Machinery | ended | 2009-09-08 | 2012-06-01 | | 2012-06-01 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders | https://standardsdrift.com/standards/en-792-9-2001-a1-2008/ | EN 809:1998+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Pumps and pump units for liquids - Common safety requirements | https://standardsdrift.com/standards/en-809-1998-a1-2009/ | EN 809:1998+A1:2009/AC:2010 EN 815:1996+A2:2008 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements | https://standardsdrift.com/standards/en-815-1996-a2-2008/ | EN 818-1:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance | https://standardsdrift.com/standards/en-818-1-1996-a1-2008/ | EN 818-2:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 | https://standardsdrift.com/standards/en-818-2-1996-a1-2008/ | EN 818-3:1999+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 | https://standardsdrift.com/standards/en-818-3-1999-a1-2008/ | EN 818-4:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 | https://standardsdrift.com/standards/en-818-4-1996-a1-2008/ | EN 818-5:1999+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 | https://standardsdrift.com/standards/en-818-5-1999-a1-2008/ | EN 818-6:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer | https://standardsdrift.com/standards/en-818-6-2000-a1-2008/ | EN 818-7:2002+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) | https://standardsdrift.com/standards/en-818-7-2002-a1-2008/ | EN 836:1997+A4:2011 | Machinery | ended | 2011-11-18 | 2014-09-30 | | 2014-09-30 | Garden equipment - Powered lawnmowers - Safety | https://standardsdrift.com/standards/en-836-1997-a4-2011/ | EN 842:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Visual danger signals - General requirements, design and testing | https://standardsdrift.com/standards/en-842-1996-a1-2008/ | EN 848-1:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2013-03-31 | | 2013-03-31 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines | https://standardsdrift.com/standards/en-848-1-2007-a1-2009/ | EN 848-1:2007+A2:2012 | Machinery | ended | 2012-11-15 | 2020-09-19 | | 2020-09-19 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines | https://standardsdrift.com/standards/en-848-1-2007-a2-2012/ | EN 848-2:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2013-03-31 | | 2013-03-31 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines | https://standardsdrift.com/standards/en-848-2-2007-a1-2009/ | EN 848-2:2007+A2:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines | https://standardsdrift.com/standards/en-848-2-2007-a2-2012/ | EN 848-3:2007+A2:2009 | Machinery | ended | 2009-12-18 | 2013-04-30 | | 2013-04-30 | Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines | https://standardsdrift.com/standards/en-848-3-2007-a2-2009/ | EN 848-3:2012 | Machinery | ended | 2013-04-05 | 2021-10-02 | | 2021-10-02 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines | https://standardsdrift.com/standards/en-848-3-2012/ | EN 859:2007+A1:2009 | Machinery | ended | 2010-05-26 | 2012-12-31 | | 2012-12-31 | Safety of woodworking machines - Hand fed surface planing machines | https://standardsdrift.com/standards/en-859-2007-a1-2009/ | EN 859:2007+A2:2012 | Machinery | ended | 2012-08-24 | 2021-10-02 | | 2021-10-02 | Safety of woodworking machines - Hand fed surface planing machines | https://standardsdrift.com/standards/en-859-2007-a2-2012/ | EN 860:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2012-12-31 | | 2012-12-31 | Safety of woodworking machines - One side thickness planing machines | https://standardsdrift.com/standards/en-860-2007-a1-2009/ | EN 860:2007+A2:2012 | Machinery | ended | 2012-08-24 | 2021-10-02 | | 2021-10-02 | Safety of woodworking machines - One side thickness planing machines | https://standardsdrift.com/standards/en-860-2007-a2-2012/ | EN 861:2007+A1:2009 | Machinery | ended | 2009-12-18 | 2012-12-31 | | 2012-12-31 | Safety of woodworking machines - Surface planing and thicknessing machines | https://standardsdrift.com/standards/en-861-2007-a1-2009/ | EN 861:2007+A2:2012 | Machinery | ended | 2012-08-24 | 2021-10-02 | | 2021-10-02 | Safety of woodworking machines - Surface planing and thicknessing machines | https://standardsdrift.com/standards/en-861-2007-a2-2012/ | EN 869:2006+A1:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety requirements for pressure metal diecasting units | https://standardsdrift.com/standards/en-869-2006-a1-2009/ | EN 894-1:1997+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators | https://standardsdrift.com/standards/en-894-1-1997-a1-2008/ | EN 894-2:1997+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays | https://standardsdrift.com/standards/en-894-2-1997-a1-2008/ | EN 894-3:2000+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators | https://standardsdrift.com/standards/en-894-3-2000-a1-2008/ | EN 894-4:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators | https://standardsdrift.com/standards/en-894-4-2010/ | EN 908:1999+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Reel machines for irrigation - Safety | https://standardsdrift.com/standards/en-908-1999-a1-2009/ | EN 909:1998+A1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety | https://standardsdrift.com/standards/en-909-1998-a1-2009/ | EN 913:2018 | General Product Safety | ended | 2019-10-10 | 2026-03-13 | 2019/1698 | 2026-04-27 | Gymnastic equipment - General safety requirements and test methods | https://standardsdrift.com/standards/en-913-2018/ | EN 913:2018+A1:2021 | General Product Safety | cited | 2024-09-13 | | 2024/2406 | 2024-12-13 | Gymnastic equipment - General safety requirements and test methods | https://standardsdrift.com/standards/en-913-2018-a1-2021/ | EN 914:2020 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety | https://standardsdrift.com/standards/en-914-2020/ | EN 915:2008 | General Product Safety | ceasing | 2014-07-11 | 2027-10-27 | | 2026-04-27 | Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety | https://standardsdrift.com/standards/en-915-2008/ | EN 915:2024 | General Product Safety | cited | 2026-04-27 | | 2026/901 | 2026-04-27 | Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety | https://standardsdrift.com/standards/en-915-2024/ | EN 916:2003 | General Product Safety | cited | 2005-10-15 | | | 2024-12-13 | Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety | https://standardsdrift.com/standards/en-916-2003/ | EN 930:1997+A2:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements | https://standardsdrift.com/standards/en-930-1997-a2-2009/ | EN 931:1997+A2:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Footwear manufacturing machines - Lasting machines - Safety requirements | https://standardsdrift.com/standards/en-931-1997-a2-2009/ | EN 940:2009 | Machinery | ended | 2009-12-18 | 2012-08-31 | | 2012-08-31 | Safety of woodworking machines - Combined woodworking machines | https://standardsdrift.com/standards/en-940-2009/ | EN 940:2009+A1:2012 | Machinery | ended | 2012-06-05 | 2022-09-03 | | 2022-09-03 | Safety of woodworking machines - Combined woodworking machines | https://standardsdrift.com/standards/en-940-2009-a1-2012/ | EN 953:1997+A1:2009 | Machinery | ended | 2009-09-08 | 2016-05-31 | | 2016-05-31 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards | https://standardsdrift.com/standards/en-953-1997-a1-2009/ | EN 957-2:2003 | General Product Safety | cited | 2006-07-22 | | | 2024-12-13 | Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods | https://standardsdrift.com/standards/en-957-2-2003/ | EN 957-6:2010+A1:2014 | General Product Safety, Machinery | ceasing | 2015-01-16 | 2027-01-20 | | 2026-09-28 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods | https://standardsdrift.com/standards/en-957-6-2010-a1-2014/ | EN 957-7:1998 | General Product Safety | cited | 2006-07-22 | | | 2024-12-13 | Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods | https://standardsdrift.com/standards/en-957-7-1998/ | EN 972:1998+A1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Tannery machines - Reciprocating roller machines - Safety requirements | https://standardsdrift.com/standards/en-972-1998-a1-2010/ | EN 972:1998+A1:2010/AC:2011 EN 981:1996+A1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - System of auditory and visual danger and information signals | https://standardsdrift.com/standards/en-981-1996-a1-2008/ | EN 982:1996+A1:2008 | Machinery | ended | 2009-09-08 | 2011-11-30 | | 2011-11-30 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics | https://standardsdrift.com/standards/en-982-1996-a1-2008/ | EN 983:1996+A1:2008 | Machinery | ended | 2009-09-08 | 2011-11-30 | | 2011-11-30 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics | https://standardsdrift.com/standards/en-983-1996-a1-2008/ | EN 996:1995+A3:2009 | Machinery | ended | 2009-09-08 | 2015-02-13 | | 2015-02-13 | Piling equipment - Safety requirements | https://standardsdrift.com/standards/en-996-1995-a3-2009/ | EN 999:1998+A1:2008 | Machinery | ended | 2009-09-08 | 2010-11-30 | | 2010-11-30 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body | https://standardsdrift.com/standards/en-999-1998-a1-2008/ | EN IEC 60204-11:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV | https://standardsdrift.com/standards/en-iec-60204-11-2019/ | EN IEC 60335-2-119:2024 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances | https://standardsdrift.com/standards/en-iec-60335-2-119-2024/ | EN IEC 60335-2-119:2024/A11:2024 EN IEC 60335-2-34:2023 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors | https://standardsdrift.com/standards/en-iec-60335-2-34-2023/ | EN IEC 60335-2-34:2023/A11:2023, EN IEC 60335-2-34:2023/A12:2025 EN IEC 60335-2-40:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | https://standardsdrift.com/standards/en-iec-60335-2-40-2024/ | EN IEC 60335-2-40:2024/A11:2024 EN IEC 60335-2-41:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Household and similar electrical appliances - Safety - Particular requirements for pumps | https://standardsdrift.com/standards/en-iec-60335-2-41-2021/ | EN IEC 60335-2-41:2021/A11:2021 EN IEC 60335-2-58:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | https://standardsdrift.com/standards/en-iec-60335-2-58-2025/ | EN IEC 60335-2-58:2025/A11:2025 EN IEC 60335-2-89:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586, 2024/1329 | 2026-09-28 | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor | https://standardsdrift.com/standards/en-iec-60335-2-89-2022/ | EN IEC 60335-2-89:2022/A11:2022, EN IEC 60335-2-89:2022/AC:2023-11 EN IEC 62061:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621, 2026/2015 | 2026-09-28 | Safety of machinery - Functional safety of safety-related control systems | https://standardsdrift.com/standards/en-iec-62061-2021/ | EN IEC 62061:2021/A1:2024 EN IEC 62368-1:2020 | General Product Safety | restricted | 2022-08-16 | | 2022/1401, 2026/901 | 2026-04-27 | Audio/video, information and communication technology equipment - Part 1: Safety requirements | https://standardsdrift.com/standards/en-iec-62368-1-2020/ | EN IEC 62368-1:2020/A11:2020 EN IEC 62841-2-12:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators | https://standardsdrift.com/standards/en-iec-62841-2-12-2024/ | EN IEC 62841-2-12:2024/A11:2024, EN IEC 62841-2-12:2024/AC:2025-11 EN IEC 62841-2-18:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-18: Particular requirements for hand-held strapping tools | https://standardsdrift.com/standards/en-iec-62841-2-18-2026/ | EN IEC 62841-2-18:2026/A11:2026 EN IEC 62841-2-19:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-19: Particular requirements for hand-held jointers | https://standardsdrift.com/standards/en-iec-62841-2-19-2025/ | EN IEC 62841-2-19:2025/A11:2025 EN IEC 62841-2-20:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-20: Particular requirements for hand-held band saws | https://standardsdrift.com/standards/en-iec-62841-2-20-2025/ | EN IEC 62841-2-20:2025/A11:2025 EN IEC 62841-2-22:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-22: Particular requirements for hand-held cut-off machines | https://standardsdrift.com/standards/en-iec-62841-2-22-2025/ | EN IEC 62841-2-22:2025/A11:2025 EN IEC 62841-2-23:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-23: Particular requirements for hand-held die grinders and small rotary tools | https://standardsdrift.com/standards/en-iec-62841-2-23-2026/ | EN IEC 62841-2-23:2026/A11:2026 EN IEC 62841-2-3:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | https://standardsdrift.com/standards/en-iec-62841-2-3-2021/ | EN IEC 62841-2-3:2021/A11:2021 EN IEC 62841-2-6:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813, 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers | https://standardsdrift.com/standards/en-iec-62841-2-6-2020/ | EN IEC 62841-2-6:2020/A11:2020, EN IEC 62841-2-6:2020/A12:2024, EN IEC 62841-2-6:2020/A1:2024, EN IEC 62841-2-6:2020/AC:2024-11 EN IEC 62841-2-7:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns | https://standardsdrift.com/standards/en-iec-62841-2-7-2024/ | EN IEC 62841-2-7:2024/A11:2024, EN IEC 62841-2-7:2024/AC:2025-07 EN IEC 62841-3-16:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-16: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders | https://standardsdrift.com/standards/en-iec-62841-3-16-2026/ | EN IEC 62841-3-16:2026/A11:2026 EN IEC 62841-3-5:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws | https://standardsdrift.com/standards/en-iec-62841-3-5-2022/ | EN IEC 62841-3-5:2022/A11:2022 EN IEC 62841-3-7:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws | https://standardsdrift.com/standards/en-iec-62841-3-7-2021/ | EN IEC 62841-3-7:2021/A11:2021 EN IEC 62841-3-9:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | https://standardsdrift.com/standards/en-iec-62841-3-9-2020/ | EN IEC 62841-3-9:2020/A11:2020 EN IEC 62841-4-3:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers | https://standardsdrift.com/standards/en-iec-62841-4-3-2021/ | EN IEC 62841-4-3:2021/A11:2021 EN IEC 62841-4-4:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws | https://standardsdrift.com/standards/en-iec-62841-4-4-2026/ | EN IEC 62841-4-4:2026/A11:2026, EN IEC 62841-4-4:2026/A1:2026 EN IEC 62841-4-5:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586, 2024/1329 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears | https://standardsdrift.com/standards/en-iec-62841-4-5-2021/ | EN IEC 62841-4-5:2021/A11:2021, EN IEC 62841-4-5:2021/AC:2024-01 EN IEC 62841-4-6:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums | https://standardsdrift.com/standards/en-iec-62841-4-6-2024/ | EN IEC 62841-4-6:2024/A11:2024 EN IEC 62841-4-7:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586, 2024/1329 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators | https://standardsdrift.com/standards/en-iec-62841-4-7-2022/ | EN IEC 62841-4-7:2022/A11:2022, EN IEC 62841-4-7:2022/AC:2023-05, EN IEC 62841-4-7:2022/AC:2023-10 EN IEC 62841-4-8:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-8: Particular requirements for shredders/chippers | https://standardsdrift.com/standards/en-iec-62841-4-8-2025/ | EN IEC 62841-4-8:2025/A11:2025 EN ISO 10218-1:2008 | Machinery | ended | 2009-09-08 | 2013-01-01 | | 2013-01-01 | Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007) | https://standardsdrift.com/standards/en-iso-10218-1-2008/ | EN ISO 10218-1:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) | https://standardsdrift.com/standards/en-iso-10218-1-2011/ | EN ISO 10218-1:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Robotics - Safety requirements - Part 1: Industrial robots (ISO 10218-1:2025) | https://standardsdrift.com/standards/en-iso-10218-1-2025/ | EN ISO 10218-2:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) | https://standardsdrift.com/standards/en-iso-10218-2-2011/ | EN ISO 10218-2:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Robotics - Safety requirements - Part 2: Industrial robot applications and robot cells (ISO 10218-2:2025) | https://standardsdrift.com/standards/en-iso-10218-2-2025/ | EN ISO 10326-1:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02) | https://standardsdrift.com/standards/en-iso-10326-1-2016/ | EN ISO 10472-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) | https://standardsdrift.com/standards/en-iso-10472-1-2008/ | EN ISO 10472-2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) | https://standardsdrift.com/standards/en-iso-10472-2-2008/ | EN ISO 10472-3:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) | https://standardsdrift.com/standards/en-iso-10472-3-2008/ | EN ISO 10472-4:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) | https://standardsdrift.com/standards/en-iso-10472-4-2008/ | EN ISO 10472-5:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) | https://standardsdrift.com/standards/en-iso-10472-5-2008/ | EN ISO 10472-6:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) | https://standardsdrift.com/standards/en-iso-10472-6-2008/ | EN ISO 10517:2009 | Machinery | ended | 2009-12-18 | 2021-10-02 | | 2021-10-02 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) | https://standardsdrift.com/standards/en-iso-10517-2009/ | EN ISO 10517:2009/A1:2013 EN ISO 10517:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Powered hand-held hedge trimmers - Safety (ISO 10517:2019) | https://standardsdrift.com/standards/en-iso-10517-2019/ | EN ISO 10821:2005 | Machinery | ended | 2009-12-18 | 2009-12-28 | | 2009-12-28 | Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) | https://standardsdrift.com/standards/en-iso-10821-2005/ | EN ISO 10821:2005/A1:2009 EN ISO 11102-1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) | https://standardsdrift.com/standards/en-iso-11102-1-2009/ | EN ISO 11102-2:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) | https://standardsdrift.com/standards/en-iso-11102-2-2009/ | EN ISO 11111-1:2009 | Machinery | ended | 2009-12-18 | 2017-11-30 | | 2017-11-30 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009) | https://standardsdrift.com/standards/en-iso-11111-1-2009/ | EN ISO 11111-1:2016 | Machinery | ceasing | 2017-06-09 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) | https://standardsdrift.com/standards/en-iso-11111-1-2016/ | EN ISO 11111-2:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) | https://standardsdrift.com/standards/en-iso-11111-2-2005/ | EN ISO 11111-2:2005/A1:2009, EN ISO 11111-2:2005/A2:2016 EN ISO 11111-3:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) | https://standardsdrift.com/standards/en-iso-11111-3-2005/ | EN ISO 11111-3:2005/A1:2009, EN ISO 11111-3:2005/A2:2016 EN ISO 11111-4:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) | https://standardsdrift.com/standards/en-iso-11111-4-2005/ | EN ISO 11111-4:2005/A1:2009, EN ISO 11111-4:2005/A2:2016 EN ISO 11111-5:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) | https://standardsdrift.com/standards/en-iso-11111-5-2005/ | EN ISO 11111-5:2005/A1:2009, EN ISO 11111-5:2005/A2:2016 EN ISO 11111-6:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) | https://standardsdrift.com/standards/en-iso-11111-6-2005/ | EN ISO 11111-6:2005/A1:2009, EN ISO 11111-6:2005/A2:2016 EN ISO 11111-7:2005 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) | https://standardsdrift.com/standards/en-iso-11111-7-2005/ | EN ISO 11111-7:2005/A1:2009, EN ISO 11111-7:2005/A2:2016 EN ISO 11145:2008 | Machinery | ended | 2009-09-08 | 2016-09-30 | | 2016-09-30 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) | https://standardsdrift.com/standards/en-iso-11145-2008/ | EN ISO 11145:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) | https://standardsdrift.com/standards/en-iso-11145-2016/ | EN ISO 11148-10:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) | https://standardsdrift.com/standards/en-iso-11148-10-2011/ | EN ISO 11148-11:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) | https://standardsdrift.com/standards/en-iso-11148-11-2011/ | EN ISO 11148-12:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) | https://standardsdrift.com/standards/en-iso-11148-12-2012/ | EN ISO 11148-13:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) | https://standardsdrift.com/standards/en-iso-11148-13-2018/ | EN ISO 11148-1:2011 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) | https://standardsdrift.com/standards/en-iso-11148-1-2011/ | EN ISO 11148-2:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) | https://standardsdrift.com/standards/en-iso-11148-2-2011/ | EN ISO 11148-3:2010 | Machinery | ended | 2011-04-08 | 2013-06-30 | | 2013-06-30 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010) | https://standardsdrift.com/standards/en-iso-11148-3-2010/ | EN ISO 11148-3:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) | https://standardsdrift.com/standards/en-iso-11148-3-2012/ | EN ISO 11148-4:2010 | Machinery | ended | 2011-04-08 | 2013-06-30 | | 2013-06-30 | Hand-held non-electric power tools - Safety requirements - Part 4: Non­rotary percussive power tools (ISO 11148-4:2010) | https://standardsdrift.com/standards/en-iso-11148-4-2010/ | EN ISO 11148-4:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) | https://standardsdrift.com/standards/en-iso-11148-4-2012/ | EN ISO 11148-5:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) | https://standardsdrift.com/standards/en-iso-11148-5-2011/ | EN ISO 11148-6:2010 | Machinery | ended | 2011-04-08 | 2013-06-30 | | 2013-06-30 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010) | https://standardsdrift.com/standards/en-iso-11148-6-2010/ | EN ISO 11148-6:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) | https://standardsdrift.com/standards/en-iso-11148-6-2012/ | EN ISO 11148-7:2012 | Machinery | ceasing | 2012-11-15 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) | https://standardsdrift.com/standards/en-iso-11148-7-2012/ | EN ISO 11148-8:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) | https://standardsdrift.com/standards/en-iso-11148-8-2011/ | EN ISO 11148-9:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) | https://standardsdrift.com/standards/en-iso-11148-9-2011/ | EN ISO 11161:2007 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) | https://standardsdrift.com/standards/en-iso-11161-2007/ | EN ISO 11161:2007/A1:2010 EN ISO 11200:2009 | Machinery | ended | 2009-12-18 | 2015-02-13 | | 2015-02-13 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) | https://standardsdrift.com/standards/en-iso-11200-2009/ | EN ISO 11200:2014 | Machinery | ended | 2015-02-13 | 2020-09-19 | | 2020-09-19 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) | https://standardsdrift.com/standards/en-iso-11200-2014/ | EN ISO 11201:2009 | Machinery | ended | 2009-12-18 | 2010-11-30 | | 2010-11-30 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) | https://standardsdrift.com/standards/en-iso-11201-2009/ | EN ISO 11201:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) | https://standardsdrift.com/standards/en-iso-11201-2010/ | EN ISO 11202:2009 | Machinery | ended | 2009-12-18 | 2010-11-30 | | 2010-11-30 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995) | https://standardsdrift.com/standards/en-iso-11202-2009/ | EN ISO 11202:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | 2022/621 | 2026-09-28 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | https://standardsdrift.com/standards/en-iso-11202-2010/ | EN ISO 11202:2010/A1:2021 EN ISO 11203:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | 2021/377 | 2026-09-28 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | https://standardsdrift.com/standards/en-iso-11203-2009/ | EN ISO 11203:2009/A1:2020 EN ISO 11204:2009 | Machinery | ended | 2009-12-18 | 2010-11-30 | | 2010-11-30 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997) | https://standardsdrift.com/standards/en-iso-11204-2009/ | EN ISO 11204:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) | https://standardsdrift.com/standards/en-iso-11204-2010/ | EN ISO 11205:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) | https://standardsdrift.com/standards/en-iso-11205-2009/ | EN ISO 11243:2016 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2016) | https://standardsdrift.com/standards/en-iso-11243-2016/ | EN ISO 11252:2008 | Machinery | ended | 2009-09-08 | 2014-02-28 | | 2014-02-28 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004) | https://standardsdrift.com/standards/en-iso-11252-2008/ | EN ISO 11252:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) | https://standardsdrift.com/standards/en-iso-11252-2013/ | EN ISO 11546-1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) | https://standardsdrift.com/standards/en-iso-11546-1-2009/ | EN ISO 11546-2:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) | https://standardsdrift.com/standards/en-iso-11546-2-2009/ | EN ISO 11553-1:2008 | Machinery | ended | 2009-09-08 | 2023-04-15 | | 2023-04-15 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) | https://standardsdrift.com/standards/en-iso-11553-1-2008/ | EN ISO 11553-1:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) | https://standardsdrift.com/standards/en-iso-11553-1-2020/ | EN ISO 11553-1:2020/A11:2020 EN ISO 11553-2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) | https://standardsdrift.com/standards/en-iso-11553-2-2008/ | EN ISO 11553-3:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) | https://standardsdrift.com/standards/en-iso-11553-3-2013/ | EN ISO 11554:2008 | Machinery | ended | 2009-09-08 | 2018-06-30 | | 2018-06-30 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) | https://standardsdrift.com/standards/en-iso-11554-2008/ | EN ISO 11554:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) | https://standardsdrift.com/standards/en-iso-11554-2017/ | EN ISO 11680-1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) | https://standardsdrift.com/standards/en-iso-11680-1-2008/ | EN ISO 11680-1:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) | https://standardsdrift.com/standards/en-iso-11680-1-2011/ | EN ISO 11680-1:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021) | https://standardsdrift.com/standards/en-iso-11680-1-2021/ | EN ISO 11680-2:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) | https://standardsdrift.com/standards/en-iso-11680-2-2008/ | EN ISO 11680-2:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) | https://standardsdrift.com/standards/en-iso-11680-2-2011/ | EN ISO 11680-2:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021) | https://standardsdrift.com/standards/en-iso-11680-2-2021/ | EN ISO 11680:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Machinery for forestry - Safety requirements and testing for portable pole mounted powered pruners (ISO 11680:2025) | https://standardsdrift.com/standards/en-iso-11680-2025/ | EN ISO 11681-1:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007) | https://standardsdrift.com/standards/en-iso-11681-1-2008/ | EN ISO 11681-1:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) | https://standardsdrift.com/standards/en-iso-11681-1-2011/ | EN ISO 11681-1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022) | https://standardsdrift.com/standards/en-iso-11681-1-2022/ | EN ISO 11681-2:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006) | https://standardsdrift.com/standards/en-iso-11681-2-2008/ | EN ISO 11681-2:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) | https://standardsdrift.com/standards/en-iso-11681-2-2011/ | EN ISO 11681-2:2011/A1:2017 EN ISO 11681-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022) | https://standardsdrift.com/standards/en-iso-11681-2-2022/ | EN ISO 11688-1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) | https://standardsdrift.com/standards/en-iso-11688-1-2009/ | EN ISO 11691:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) | https://standardsdrift.com/standards/en-iso-11691-2009/ | EN ISO 11806-1:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) | https://standardsdrift.com/standards/en-iso-11806-1-2011/ | EN ISO 11806-1:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022) | https://standardsdrift.com/standards/en-iso-11806-1-2022/ | EN ISO 11806-2:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) | https://standardsdrift.com/standards/en-iso-11806-2-2011/ | EN ISO 11806-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022) | https://standardsdrift.com/standards/en-iso-11806-2-2022/ | EN ISO 11806:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) | https://standardsdrift.com/standards/en-iso-11806-2008/ | EN ISO 11850:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - General safety requirements (ISO 11850:2011) | https://standardsdrift.com/standards/en-iso-11850-2011/ | EN ISO 11850:2011/A1:2016, EN ISO 11850:2011/A2:2022 EN ISO 11957:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) | https://standardsdrift.com/standards/en-iso-11957-2009/ | EN ISO 12100-1:2003 | Machinery | ended | 2009-12-18 | 2013-11-30 | | 2013-11-30 | Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003) | https://standardsdrift.com/standards/en-iso-12100-1-2003/ | EN ISO 12100-1:2003/A1:2009 EN ISO 12100-2:2003 | Machinery | ended | 2009-12-18 | 2013-11-30 | | 2013-11-30 | Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) | https://standardsdrift.com/standards/en-iso-12100-2-2003/ | EN ISO 12100-2:2003/A1:2009 EN ISO 12100:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) | https://standardsdrift.com/standards/en-iso-12100-2010/ | EN ISO 13482:2014 | Machinery | ceasing | 2014-07-11 | 2027-01-20 | | 2026-09-28 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) | https://standardsdrift.com/standards/en-iso-13482-2014/ | EN ISO 13732-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) | https://standardsdrift.com/standards/en-iso-13732-1-2008/ | EN ISO 13732-3:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) | https://standardsdrift.com/standards/en-iso-13732-3-2008/ | EN ISO 13753:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) | https://standardsdrift.com/standards/en-iso-13753-2008/ | EN ISO 13766-2:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) | https://standardsdrift.com/standards/en-iso-13766-2-2018/ | EN ISO 13849-1:2008 | Machinery | ended | 2009-09-08 | 2016-06-30 | | 2016-06-30 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006) | https://standardsdrift.com/standards/en-iso-13849-1-2008/ | EN ISO 13849-1:2008/AC:2009 EN ISO 13849-1:2015 | Machinery | ceasing | 2016-05-13 | 2027-05-15 | | 2024-05-15 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) | https://standardsdrift.com/standards/en-iso-13849-1-2015/ | EN ISO 13849-1:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023) | https://standardsdrift.com/standards/en-iso-13849-1-2023/ | EN ISO 13849-2:2008 | Machinery | ended | 2009-09-08 | 2013-04-30 | | 2013-04-30 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003) | https://standardsdrift.com/standards/en-iso-13849-2-2008/ | EN ISO 13849-2:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) | https://standardsdrift.com/standards/en-iso-13849-2-2012/ | EN ISO 13850:2008 | Machinery | ended | 2009-09-08 | 2016-05-31 | | 2016-05-31 | Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006) | https://standardsdrift.com/standards/en-iso-13850-2008/ | EN ISO 13850:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) | https://standardsdrift.com/standards/en-iso-13850-2015/ | EN ISO 13851:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019) | https://standardsdrift.com/standards/en-iso-13851-2019/ | EN ISO 13854:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) | https://standardsdrift.com/standards/en-iso-13854-2019/ | EN ISO 13855:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) | https://standardsdrift.com/standards/en-iso-13855-2010/ | EN ISO 13855:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Safety of machinery - Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024) | https://standardsdrift.com/standards/en-iso-13855-2024/ | EN ISO 13856-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) | https://standardsdrift.com/standards/en-iso-13856-1-2013/ | EN ISO 13856-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) | https://standardsdrift.com/standards/en-iso-13856-2-2013/ | EN ISO 13856-3:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) | https://standardsdrift.com/standards/en-iso-13856-3-2013/ | EN ISO 13857:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) | https://standardsdrift.com/standards/en-iso-13857-2008/ | EN ISO 13857:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) | https://standardsdrift.com/standards/en-iso-13857-2019/ | EN ISO 14118:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) | https://standardsdrift.com/standards/en-iso-14118-2018/ | EN ISO 14119:2013 | Machinery | ceasing | 2014-04-11 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013) | https://standardsdrift.com/standards/en-iso-14119-2013/ | EN ISO 14119:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2024) | https://standardsdrift.com/standards/en-iso-14119-2025/ | EN ISO 14119:2025/A11:2026 EN ISO 14120:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) | https://standardsdrift.com/standards/en-iso-14120-2015/ | EN ISO 14121-1:2007 | Machinery | ended | 2009-09-08 | 2013-11-30 | | 2013-11-30 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) | https://standardsdrift.com/standards/en-iso-14121-1-2007/ | EN ISO 14122-1:2001 | Machinery | ended | 2010-10-20 | 2016-12-31 | | 2016-12-31 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) | https://standardsdrift.com/standards/en-iso-14122-1-2001/ | EN ISO 14122-1:2001/A1:2010 EN ISO 14122-1:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) | https://standardsdrift.com/standards/en-iso-14122-1-2016/ | EN ISO 14122-2:2001 | Machinery | ended | 2010-10-20 | 2016-12-31 | | 2016-12-31 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) | https://standardsdrift.com/standards/en-iso-14122-2-2001/ | EN ISO 14122-2:2001/A1:2010 EN ISO 14122-2:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) | https://standardsdrift.com/standards/en-iso-14122-2-2016/ | EN ISO 14122-3:2001 | Machinery | ended | 2010-10-20 | 2016-12-31 | | 2016-12-31 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) | https://standardsdrift.com/standards/en-iso-14122-3-2001/ | EN ISO 14122-3:2001/A1:2010 EN ISO 14122-3:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) | https://standardsdrift.com/standards/en-iso-14122-3-2016/ | EN ISO 14122-4:2004 | Machinery | ended | 2011-04-08 | 2016-12-31 | | 2016-12-31 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) | https://standardsdrift.com/standards/en-iso-14122-4-2004/ | EN ISO 14122-4:2004/A1:2010 EN ISO 14122-4:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) | https://standardsdrift.com/standards/en-iso-14122-4-2016/ | EN ISO 14123-1:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) | https://standardsdrift.com/standards/en-iso-14123-1-2015/ | EN ISO 14123-2:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015) | https://standardsdrift.com/standards/en-iso-14123-2-2015/ | EN ISO 14159:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) | https://standardsdrift.com/standards/en-iso-14159-2008/ | EN ISO 14314:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) | https://standardsdrift.com/standards/en-iso-14314-2009/ | EN ISO 14738:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) | https://standardsdrift.com/standards/en-iso-14738-2008/ | EN ISO 14982:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) | https://standardsdrift.com/standards/en-iso-14982-2009/ | EN ISO 15012-4:2016 | Machinery | ended | 2017-06-09 | 2022-09-03 | | 2022-09-03 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) | https://standardsdrift.com/standards/en-iso-15012-4-2016/ | EN ISO 15536-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) | https://standardsdrift.com/standards/en-iso-15536-1-2008/ | EN ISO 15744:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) | https://standardsdrift.com/standards/en-iso-15744-2008/ | EN ISO 16089:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | | 2026-09-28 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) | https://standardsdrift.com/standards/en-iso-16089-2015/ | EN ISO 16089:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2025) | https://standardsdrift.com/standards/en-iso-16089-2025/ | EN ISO 16092-1:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017) | https://standardsdrift.com/standards/en-iso-16092-1-2018/ | EN ISO 16092-2:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019) | https://standardsdrift.com/standards/en-iso-16092-2-2020/ | EN ISO 16092-3:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) | https://standardsdrift.com/standards/en-iso-16092-3-2018/ | EN ISO 16092-4:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019) | https://standardsdrift.com/standards/en-iso-16092-4-2020/ | EN ISO 16093:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) | https://standardsdrift.com/standards/en-iso-16093-2017/ | EN ISO 16119-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013) | https://standardsdrift.com/standards/en-iso-16119-1-2013/ | EN ISO 16119-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03) | https://standardsdrift.com/standards/en-iso-16119-2-2013/ | EN ISO 16119-3:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) | https://standardsdrift.com/standards/en-iso-16119-3-2013/ | EN ISO 16119-4:2014 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) | https://standardsdrift.com/standards/en-iso-16119-4-2014/ | EN ISO 16230-1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015) | https://standardsdrift.com/standards/en-iso-16230-1-2015/ | EN ISO 16231-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013) | https://standardsdrift.com/standards/en-iso-16231-1-2013/ | EN ISO 16231-2:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015) | https://standardsdrift.com/standards/en-iso-16231-2-2015/ | EN ISO 17916:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Safety of thermal cutting machines (ISO 17916:2016) | https://standardsdrift.com/standards/en-iso-17916-2016/ | EN ISO 18063-2:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021) | https://standardsdrift.com/standards/en-iso-18063-2-2021/ | EN ISO 18217:2015 | Machinery | ended | 2016-01-15 | 2025-02-02 | | 2025-02-02 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) | https://standardsdrift.com/standards/en-iso-18217-2015/ | EN ISO 18497-1:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 1: Machine design principles and vocabulary (ISO 18497-1:2024) | https://standardsdrift.com/standards/en-iso-18497-1-2024/ | EN ISO 18497-2:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 2: Design principles for obstacle protection systems (ISO 18497-2:2024) | https://standardsdrift.com/standards/en-iso-18497-2-2024/ | EN ISO 18497-3:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 3: Autonomous operating zones (ISO 18497-3:2024) | https://standardsdrift.com/standards/en-iso-18497-3-2024/ | EN ISO 18497-4:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 4: Verification methods and validation principles (ISO 18497-4:2024) | https://standardsdrift.com/standards/en-iso-18497-4-2024/ | EN ISO 18497:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018) | https://standardsdrift.com/standards/en-iso-18497-2018/ | EN ISO 19085-10:2019 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) | https://standardsdrift.com/standards/en-iso-19085-10-2019/ | EN ISO 19085-10:2019/A11:2020 EN ISO 19085-11:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020) | https://standardsdrift.com/standards/en-iso-19085-11-2020/ | EN ISO 19085-11:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2024) | https://standardsdrift.com/standards/en-iso-19085-11-2024/ | EN ISO 19085-12:2021 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021) | https://standardsdrift.com/standards/en-iso-19085-12-2021/ | EN ISO 19085-12:2021/A11:2023 EN ISO 19085-12:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 12: Tenoning-profiling machines (ISO 19085-12:2024) | https://standardsdrift.com/standards/en-iso-19085-12-2024/ | EN ISO 19085-13:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) | https://standardsdrift.com/standards/en-iso-19085-13-2020/ | EN ISO 19085-13:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2025) | https://standardsdrift.com/standards/en-iso-19085-13-2025/ | EN ISO 19085-14:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021) | https://standardsdrift.com/standards/en-iso-19085-14-2021/ | EN ISO 19085-15:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021) | https://standardsdrift.com/standards/en-iso-19085-15-2021/ | EN ISO 19085-15:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2025) | https://standardsdrift.com/standards/en-iso-19085-15-2025/ | EN ISO 19085-16:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021) | https://standardsdrift.com/standards/en-iso-19085-16-2021/ | EN ISO 19085-17:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021) | https://standardsdrift.com/standards/en-iso-19085-17-2021/ | EN ISO 19085-1:2017 | Machinery | ended | 2018-03-09 | 2023-10-11 | | 2023-10-11 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) | https://standardsdrift.com/standards/en-iso-19085-1-2017/ | EN ISO 19085-1:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021) | https://standardsdrift.com/standards/en-iso-19085-1-2021/ | EN ISO 19085-2:2017 | Machinery | ended | 2018-03-09 | 2025-02-02 | | 2025-02-02 | Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01) | https://standardsdrift.com/standards/en-iso-19085-2-2017/ | EN ISO 19085-2:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021) | https://standardsdrift.com/standards/en-iso-19085-2-2021/ | EN ISO 19085-3:2017 | Machinery | ended | 2019-10-24 | 2025-02-02 | 2019/1766 | 2025-02-02 | Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) | https://standardsdrift.com/standards/en-iso-19085-3-2017/ | EN ISO 19085-3:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021) | https://standardsdrift.com/standards/en-iso-19085-3-2021/ | EN ISO 19085-4:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) | https://standardsdrift.com/standards/en-iso-19085-4-2018/ | EN ISO 19085-4:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2024) | https://standardsdrift.com/standards/en-iso-19085-4-2024/ | EN ISO 19085-5:2017 | Machinery | ceasing | 2018-03-09 | 2027-01-20 | | 2026-09-28 | Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017) | https://standardsdrift.com/standards/en-iso-19085-5-2017/ | EN ISO 19085-5:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2024) | https://standardsdrift.com/standards/en-iso-19085-5-2024/ | EN ISO 19085-6:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017) | https://standardsdrift.com/standards/en-iso-19085-6-2017/ | EN ISO 19085-6:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (toupie) (ISO 19085-6:2024) | https://standardsdrift.com/standards/en-iso-19085-6-2024/ | EN ISO 19085-7:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) | https://standardsdrift.com/standards/en-iso-19085-7-2019/ | EN ISO 19085-7:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 7: Surface planing, thickness planing and combined surface/thickness planing machines (ISO 19085-7:2024) | https://standardsdrift.com/standards/en-iso-19085-7-2024/ | EN ISO 19085-8:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) | https://standardsdrift.com/standards/en-iso-19085-8-2018/ | EN ISO 19085-8:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 8: Wide belt sanding machines and surface treating machines (ISO 19085-8:2024) | https://standardsdrift.com/standards/en-iso-19085-8-2024/ | EN ISO 19085-9:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019) | https://standardsdrift.com/standards/en-iso-19085-9-2020/ | EN ISO 19085-9:2024 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024) | https://standardsdrift.com/standards/en-iso-19085-9-2024/ | EN ISO 19225:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436, 2021/377 | 2026-09-28 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | https://standardsdrift.com/standards/en-iso-19225-2017/ | EN ISO 19225:2017/A1:2019 EN ISO 19296:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Mining - Mobile machines working underground - Machine safety (ISO 19296:2018) | https://standardsdrift.com/standards/en-iso-19296-2018/ | EN ISO 19353:2016 | Machinery | ended | 2016-09-09 | 2021-10-02 | | 2021-10-02 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) | https://standardsdrift.com/standards/en-iso-19353-2016/ | EN ISO 19353:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2019) | https://standardsdrift.com/standards/en-iso-19353-2019/ | EN ISO 19432-1:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020) | https://standardsdrift.com/standards/en-iso-19432-1-2020/ | EN ISO 19432:2008 | Machinery | ended | 2009-09-08 | 2013-01-31 | | 2013-01-31 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006) | https://standardsdrift.com/standards/en-iso-19432-2008/ | EN ISO 19432:2012 | Machinery | ended | 2012-11-15 | 2022-09-03 | | 2022-09-03 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) | https://standardsdrift.com/standards/en-iso-19432-2012/ | EN ISO 19472-2:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022) | https://standardsdrift.com/standards/en-iso-19472-2-2022/ | EN ISO 19932-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013) | https://standardsdrift.com/standards/en-iso-19932-1-2013/ | EN ISO 19932-1:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2025) | https://standardsdrift.com/standards/en-iso-19932-1-2025/ | EN ISO 19932-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013) | https://standardsdrift.com/standards/en-iso-19932-2-2013/ | EN ISO 19932-2:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2025) | https://standardsdrift.com/standards/en-iso-19932-2-2025/ | EN ISO 20361:2009 | Machinery | ended | 2009-09-08 | 2016-09-09 | | 2016-09-09 | Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) | https://standardsdrift.com/standards/en-iso-20361-2009/ | EN ISO 20361:2015 | Machinery | ended | 2016-09-09 | 2022-09-03 | | 2022-09-03 | Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) | https://standardsdrift.com/standards/en-iso-20361-2015/ | EN ISO 20361:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) | https://standardsdrift.com/standards/en-iso-20361-2019/ | EN ISO 20361:2019/A11:2020 EN ISO 20430:2020 | Machinery | ceasing | 2021-10-15 | 2027-01-20 | 2021/1813 | 2026-09-28 | Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) | https://standardsdrift.com/standards/en-iso-20430-2020/ | EN ISO 20607:2019 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019) | https://standardsdrift.com/standards/en-iso-20607-2019/ | EN ISO 20643:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) | https://standardsdrift.com/standards/en-iso-20643-2008/ | EN ISO 20643:2008/A1:2012 EN ISO 20957-10:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017) | https://standardsdrift.com/standards/en-iso-20957-10-2017/ | EN ISO 20957-1:2013 | General Product Safety | cited | 2014-07-11 | | | 2024-12-13 | Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013) | https://standardsdrift.com/standards/en-iso-20957-1-2013/ | EN ISO 20957-4:2016 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016) | https://standardsdrift.com/standards/en-iso-20957-4-2016/ | EN ISO 20957-5:2016 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016) | https://standardsdrift.com/standards/en-iso-20957-5-2016/ | EN ISO 20957-8:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017) | https://standardsdrift.com/standards/en-iso-20957-8-2017/ | EN ISO 20957-9:2016 | General Product Safety | cited | 2020-12-01 | | 2020/1808 | 2024-12-13 | Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016) | https://standardsdrift.com/standards/en-iso-20957-9-2016/ | EN ISO 20957-9:2016/A1:2019 EN ISO 2151:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) | https://standardsdrift.com/standards/en-iso-2151-2008/ | EN ISO 21904-1:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) | https://standardsdrift.com/standards/en-iso-21904-1-2020/ | EN ISO 22291:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022) | https://standardsdrift.com/standards/en-iso-22291-2022/ | EN ISO 22867:2008 | Machinery | ended | 2009-09-08 | 2012-06-30 | | 2012-06-30 | Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006) | https://standardsdrift.com/standards/en-iso-22867-2008/ | EN ISO 22867:2011 | Machinery | ended | 2012-02-29 | 2025-02-02 | | 2025-02-02 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) | https://standardsdrift.com/standards/en-iso-22867-2011/ | EN ISO 22867:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021) | https://standardsdrift.com/standards/en-iso-22867-2021/ | EN ISO 22868:2008 | Machinery | ended | 2009-09-08 | 2011-09-30 | | 2011-09-30 | Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005) | https://standardsdrift.com/standards/en-iso-22868-2008/ | EN ISO 22868:2011 | Machinery | ended | 2011-07-20 | 2023-10-11 | | 2023-10-11 | Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) | https://standardsdrift.com/standards/en-iso-22868-2011/ | EN ISO 22868:2021 | Machinery | ceasing | 2022-04-13 | 2027-01-20 | 2022/621 | 2026-09-28 | Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021) | https://standardsdrift.com/standards/en-iso-22868-2021/ | EN ISO 23062:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022) | https://standardsdrift.com/standards/en-iso-23062-2022/ | EN ISO 23063:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Foundry machinery - Safety requirements for high pressure die casting machines (ISO 23063:2024) | https://standardsdrift.com/standards/en-iso-23063-2025/ | EN ISO 23125:2010 | Machinery | ended | 2010-10-20 | 2016-02-29 | | 2016-02-29 | Machine tools - Safety - Turning machines (ISO 23125:2010) | https://standardsdrift.com/standards/en-iso-23125-2010/ | EN ISO 23125:2010/A1:2012 EN ISO 23125:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | | 2026-09-28 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) | https://standardsdrift.com/standards/en-iso-23125-2015/ | EN ISO 23779:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024) | https://standardsdrift.com/standards/en-iso-23779-2025/ | EN ISO 25119-1:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018) | https://standardsdrift.com/standards/en-iso-25119-1-2023/ | EN ISO 25119-1:2023/A1:2023 EN ISO 25119-2:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019) | https://standardsdrift.com/standards/en-iso-25119-2-2023/ | EN ISO 25119-3:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018) | https://standardsdrift.com/standards/en-iso-25119-3-2023/ | EN ISO 25119-3:2023/A1:2023 EN ISO 25119-4:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018) | https://standardsdrift.com/standards/en-iso-25119-4-2023/ | EN ISO 25119-4:2023/A1:2023 EN ISO 25649-1:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) | https://standardsdrift.com/standards/en-iso-25649-1-2017/ | EN ISO 25649-2:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017) | https://standardsdrift.com/standards/en-iso-25649-2-2017/ | EN ISO 25649-3:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017) | https://standardsdrift.com/standards/en-iso-25649-3-2017/ | EN ISO 25649-4:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) | https://standardsdrift.com/standards/en-iso-25649-4-2017/ | EN ISO 25649-5:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017) | https://standardsdrift.com/standards/en-iso-25649-5-2017/ | EN ISO 25649-6:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017) | https://standardsdrift.com/standards/en-iso-25649-6-2017/ | EN ISO 25649-7:2017 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) | https://standardsdrift.com/standards/en-iso-25649-7-2017/ | EN ISO 28139:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) | https://standardsdrift.com/standards/en-iso-28139-2009/ | EN ISO 28139:2021 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods (ISO 28139:2019) | https://standardsdrift.com/standards/en-iso-28139-2021/ | EN ISO 28139:2021/A1:2024 EN ISO 2860:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) | https://standardsdrift.com/standards/en-iso-2860-2008/ | EN ISO 2867:2008 | Machinery | ended | 2009-09-08 | 2014-07-31 | | 2014-07-31 | Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008) | https://standardsdrift.com/standards/en-iso-2867-2008/ | EN ISO 2867:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Access systems (ISO 2867:2011) | https://standardsdrift.com/standards/en-iso-2867-2011/ | EN ISO 28881:2013 | Machinery | ended | 2013-11-28 | 2025-02-02 | | 2025-02-02 | Machine tools - Safety - Electro-discharge machines (ISO 28881:2013) | https://standardsdrift.com/standards/en-iso-28881-2013/ | EN ISO 28881:2013/AC:2013 EN ISO 28881:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Machine tools - Safety - Electrical discharge machines (ISO 28881:2022) | https://standardsdrift.com/standards/en-iso-28881-2022/ | EN ISO 28927-10:2011 | Machinery | ceasing | 2011-11-18 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) | https://standardsdrift.com/standards/en-iso-28927-10-2011/ | EN ISO 28927-11:2011 | Machinery | ceasing | 2011-07-20 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) | https://standardsdrift.com/standards/en-iso-28927-11-2011/ | EN ISO 28927-12:2012 | Machinery | ceasing | 2013-04-05 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) | https://standardsdrift.com/standards/en-iso-28927-12-2012/ | EN ISO 28927-13:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022) | https://standardsdrift.com/standards/en-iso-28927-13-2022/ | EN ISO 28927-1:2009 | Machinery | ended | 2010-05-26 | 2025-02-02 | | 2025-02-02 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) | https://standardsdrift.com/standards/en-iso-28927-1-2009/ | EN ISO 28927-1:2009/A1:2017 EN ISO 28927-1:2019 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019) | https://standardsdrift.com/standards/en-iso-28927-1-2019/ | EN ISO 28927-2:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | 2019/436 | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | https://standardsdrift.com/standards/en-iso-28927-2-2009/ | EN ISO 28927-2:2009/A1:2017 EN ISO 28927-3:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) | https://standardsdrift.com/standards/en-iso-28927-3-2009/ | EN ISO 28927-4:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | 2020/480 | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) | https://standardsdrift.com/standards/en-iso-28927-4-2010/ | EN ISO 28927-4:2010/A1:2018 EN ISO 28927-5:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) | https://standardsdrift.com/standards/en-iso-28927-5-2009/ | EN ISO 28927-5:2009/A1:2015 EN ISO 28927-6:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) | https://standardsdrift.com/standards/en-iso-28927-6-2009/ | EN ISO 28927-7:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) | https://standardsdrift.com/standards/en-iso-28927-7-2009/ | EN ISO 28927-8:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) | https://standardsdrift.com/standards/en-iso-28927-8-2009/ | EN ISO 28927-8:2009/A1:2015 EN ISO 28927-9:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) | https://standardsdrift.com/standards/en-iso-28927-9-2009/ | EN ISO 3164:2008 | Machinery | ended | 2009-09-08 | 2013-11-30 | | 2013-11-30 | Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995) | https://standardsdrift.com/standards/en-iso-3164-2008/ | EN ISO 3164:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | 2024/2408 | 2026-09-28 | Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) | https://standardsdrift.com/standards/en-iso-3164-2013/ | EN ISO 3164:2013/A1:2024 EN ISO 3266:2010 | Machinery | ceasing | 2010-10-20 | 2027-01-20 | | 2026-09-28 | Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) | https://standardsdrift.com/standards/en-iso-3266-2010/ | EN ISO 3266:2010/A1:2015 EN ISO 3411:2007 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) | https://standardsdrift.com/standards/en-iso-3411-2007/ | EN ISO 3449:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) | https://standardsdrift.com/standards/en-iso-3449-2008/ | EN ISO 3450:2008 | Machinery | ended | 2009-09-08 | 2012-05-31 | | 2012-05-31 | Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) | https://standardsdrift.com/standards/en-iso-3450-2008/ | EN ISO 3450:2011 | Machinery | ceasing | 2012-02-29 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) | https://standardsdrift.com/standards/en-iso-3450-2011/ | EN ISO 3457:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) | https://standardsdrift.com/standards/en-iso-3457-2008/ | EN ISO 3471:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) | https://standardsdrift.com/standards/en-iso-3471-2008/ | EN ISO 3691-1:2015 | Machinery | ceasing | 2016-01-15 | 2027-01-20 | 2021/377 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | https://standardsdrift.com/standards/en-iso-3691-1-2015/ | EN ISO 3691-1:2015/A1:2020, EN ISO 3691-1:2015/AC:2016 EN ISO 3691-4:2023 | Machinery | ceasing | 2024-05-15 | 2027-01-20 | 2024/1329 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023) | https://standardsdrift.com/standards/en-iso-3691-4-2023/ | EN ISO 3691-5:2009 | Machinery | ended | 2013-11-28 | 2014-08-31 | | 2014-08-31 | Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009) | https://standardsdrift.com/standards/en-iso-3691-5-2009/ | EN ISO 3691-5:2014 | Machinery | ended | 2014-07-11 | 2021-10-02 | | 2021-10-02 | Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | https://standardsdrift.com/standards/en-iso-3691-5-2014/ | EN ISO 3691-5:2014/AC:2014 EN ISO 3691-5:2015 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480, 2021/377 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | https://standardsdrift.com/standards/en-iso-3691-5-2015/ | EN ISO 3691-5:2015/A1:2020 EN ISO 3691-6:2013 | Machinery | ended | 2014-07-11 | 2016-05-13 | | 2016-05-13 | Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) | https://standardsdrift.com/standards/en-iso-3691-6-2013/ | EN ISO 3691-6:2013/AC:2014 EN ISO 3691-6:2015 | Machinery | ended | 2016-05-13 | 2025-02-02 | | 2025-02-02 | Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) | https://standardsdrift.com/standards/en-iso-3691-6-2015/ | EN ISO 3691-6:2015/AC:2016 EN ISO 3691-6:2021 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021) | https://standardsdrift.com/standards/en-iso-3691-6-2021/ | EN ISO 3741:2009 | Machinery | ended | 2009-12-18 | 2011-04-30 | | 2011-04-30 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001) | https://standardsdrift.com/standards/en-iso-3741-2009/ | EN ISO 3741:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) | https://standardsdrift.com/standards/en-iso-3741-2010/ | EN ISO 3743-1:2009 | Machinery | ended | 2009-12-18 | 2011-04-30 | | 2011-04-30 | Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) | https://standardsdrift.com/standards/en-iso-3743-1-2009/ | EN ISO 3743-1:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) | https://standardsdrift.com/standards/en-iso-3743-1-2010/ | EN ISO 3743-2:2009 | Machinery | ended | 2009-12-18 | 2023-04-15 | | 2023-04-15 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) | https://standardsdrift.com/standards/en-iso-3743-2-2009/ | EN ISO 3743-2:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018) | https://standardsdrift.com/standards/en-iso-3743-2-2019/ | EN ISO 3744:2009 | Machinery | ended | 2009-12-18 | 2011-04-30 | | 2011-04-30 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) | https://standardsdrift.com/standards/en-iso-3744-2009/ | EN ISO 3744:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) | https://standardsdrift.com/standards/en-iso-3744-2010/ | EN ISO 3744:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2025, including corrected version 2026-01) | https://standardsdrift.com/standards/en-iso-3744-2026/ | EN ISO 3745:2009 | Machinery | ended | 2009-12-18 | 2012-09-30 | | 2012-09-30 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) | https://standardsdrift.com/standards/en-iso-3745-2009/ | EN ISO 3745:2012 | Machinery | ceasing | 2012-06-05 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) | https://standardsdrift.com/standards/en-iso-3745-2012/ | EN ISO 3745:2012/A1:2017 EN ISO 3746:2009 | Machinery | ended | 2009-12-18 | 2011-06-30 | | 2011-06-30 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) | https://standardsdrift.com/standards/en-iso-3746-2009/ | EN ISO 3746:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) | https://standardsdrift.com/standards/en-iso-3746-2010/ | EN ISO 3747:2009 | Machinery | ended | 2009-12-18 | 2011-06-30 | | 2011-06-30 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000) | https://standardsdrift.com/standards/en-iso-3747-2009/ | EN ISO 3747:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) | https://standardsdrift.com/standards/en-iso-3747-2010/ | EN ISO 3991:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery - Robotic feed systems - Safety (ISO 3991:2025) | https://standardsdrift.com/standards/en-iso-3991-2025/ | EN ISO 4210-1:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 1: Terms and definitions (ISO 4210-1:2014) | https://standardsdrift.com/standards/en-iso-4210-1-2014/ | EN ISO 4210-2:2015 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015) | https://standardsdrift.com/standards/en-iso-4210-2-2015/ | EN ISO 4210-3:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 3: Common test methods (ISO 4210-3:2014) | https://standardsdrift.com/standards/en-iso-4210-3-2014/ | EN ISO 4210-4:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 4: Braking test methods (ISO 4210-4:2014) | https://standardsdrift.com/standards/en-iso-4210-4-2014/ | EN ISO 4210-5:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO 4210-5:2014, Corrected version 2015-02-01) | https://standardsdrift.com/standards/en-iso-4210-5-2014/ | EN ISO 4210-6:2015 | General Product Safety | cited | 2019-10-10 | | 2019/1698 | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods (ISO 4210-6:2015) | https://standardsdrift.com/standards/en-iso-4210-6-2015/ | EN ISO 4210-7:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods (ISO 4210-7:2014) | https://standardsdrift.com/standards/en-iso-4210-7-2014/ | EN ISO 4210-8:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system test methods (ISO 4210-8:2014) | https://standardsdrift.com/standards/en-iso-4210-8-2014/ | EN ISO 4210-9:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2014) | https://standardsdrift.com/standards/en-iso-4210-9-2014/ | EN ISO 4254-10:2009 | Machinery | ceasing | 2010-05-26 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) | https://standardsdrift.com/standards/en-iso-4254-10-2009/ | EN ISO 4254-10:2009/AC:2010 EN ISO 4254-11:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | 2021/377 | 2026-09-28 | Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | https://standardsdrift.com/standards/en-iso-4254-11-2010/ | EN ISO 4254-11:2010/A1:2020 EN ISO 4254-12:2012 | Machinery | ceasing | 2012-08-24 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) | https://standardsdrift.com/standards/en-iso-4254-12-2012/ | EN ISO 4254-12:2012/A1:2017 EN ISO 4254-14:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) | https://standardsdrift.com/standards/en-iso-4254-14-2016/ | EN ISO 4254-17:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022) | https://standardsdrift.com/standards/en-iso-4254-17-2022/ | EN ISO 4254-1:2009 | Machinery | ended | 2009-12-18 | 2013-11-30 | | 2013-11-30 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008) | https://standardsdrift.com/standards/en-iso-4254-1-2009/ | EN ISO 4254-1:2009/AC:2010 EN ISO 4254-1:2013 | Machinery | ended | 2013-11-28 | 2016-05-13 | | 2016-05-13 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) | https://standardsdrift.com/standards/en-iso-4254-1-2013/ | EN ISO 4254-1:2015 | Machinery | ceasing | 2016-05-13 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) | https://standardsdrift.com/standards/en-iso-4254-1-2015/ | EN ISO 4254-1:2015/A1:2021 EN ISO 4254-20:2025 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Agricultural machinery - Safety - Part 20: Grape, olives and coffee harvesters (ISO 4254-20:2025) | https://standardsdrift.com/standards/en-iso-4254-20-2025/ | EN ISO 4254-5:2009 | Machinery | ended | 2010-05-26 | 2020-09-19 | | 2020-09-19 | Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008) | https://standardsdrift.com/standards/en-iso-4254-5-2009/ | EN ISO 4254-5:2009/AC:2010 EN ISO 4254-5:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018) | https://standardsdrift.com/standards/en-iso-4254-5-2018/ | EN ISO 4254-6:2009 | Machinery | ended | 2010-05-26 | 2025-02-02 | | 2025-02-02 | Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) | https://standardsdrift.com/standards/en-iso-4254-6-2009/ | EN ISO 4254-6:2009/AC:2010 EN ISO 4254-6:2020 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020) | https://standardsdrift.com/standards/en-iso-4254-6-2020/ | EN ISO 4254-6:2020/A11:2021 EN ISO 4254-7:2009 | Machinery | ended | 2010-05-26 | 2020-09-19 | | 2020-09-19 | Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) | https://standardsdrift.com/standards/en-iso-4254-7-2009/ | EN ISO 4254-7:2009/AC:2010 EN ISO 4254-7:2017 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436, 2026/2015 | 2026-09-28 | Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) | https://standardsdrift.com/standards/en-iso-4254-7-2017/ | EN ISO 4254-7:2017/A1:2026 EN ISO 4254-8:2018 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) | https://standardsdrift.com/standards/en-iso-4254-8-2018/ | EN ISO 4254-9:2018 | Machinery | ceasing | 2020-04-02 | 2027-01-20 | 2020/480 | 2026-09-28 | Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018) | https://standardsdrift.com/standards/en-iso-4254-9-2018/ | EN ISO 4413:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) | https://standardsdrift.com/standards/en-iso-4413-2010/ | EN ISO 4414:2010 | Machinery | ceasing | 2011-04-08 | 2027-01-20 | | 2026-09-28 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) | https://standardsdrift.com/standards/en-iso-4414-2010/ | EN ISO 4871:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) | https://standardsdrift.com/standards/en-iso-4871-2009/ | EN ISO 5010:2019 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) | https://standardsdrift.com/standards/en-iso-5010-2019/ | EN ISO 5136:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) | https://standardsdrift.com/standards/en-iso-5136-2009/ | EN ISO 5395-1:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | 2019/436 | 2026-09-28 | Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | https://standardsdrift.com/standards/en-iso-5395-1-2013/ | EN ISO 5395-1:2013/A1:2018 EN ISO 5395-2:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | | 2026-09-28 | Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) | https://standardsdrift.com/standards/en-iso-5395-2-2013/ | EN ISO 5395-2:2013/A1:2016, EN ISO 5395-2:2013/A2:2017 EN ISO 5395-3:2013 | Machinery | ceasing | 2013-11-28 | 2027-01-20 | 2019/436 | 2026-09-28 | Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | https://standardsdrift.com/standards/en-iso-5395-3-2013/ | EN ISO 5395-3:2013/A1:2017, EN ISO 5395-3:2013/A2:2018 EN ISO 5674:2009 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) | https://standardsdrift.com/standards/en-iso-5674-2009/ | EN ISO 6682:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) | https://standardsdrift.com/standards/en-iso-6682-2008/ | EN ISO 6683:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) | https://standardsdrift.com/standards/en-iso-6683-2008/ | EN ISO 6909 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Machine tools - Safety - Press brakes (ISO/FDIS 6909:2025) | https://standardsdrift.com/standards/en-iso-6909/ | EN ISO 7096:2008 | Machinery | ended | 2009-09-08 | 2022-09-03 | | 2022-09-03 | Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) | https://standardsdrift.com/standards/en-iso-7096-2008/ | EN ISO 7096:2008/AC:2009 EN ISO 7096:2020 | Machinery | ceasing | 2021-03-03 | 2027-01-20 | 2021/377 | 2026-09-28 | Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020) | https://standardsdrift.com/standards/en-iso-7096-2020/ | EN ISO 7235:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) | https://standardsdrift.com/standards/en-iso-7235-2009/ | EN ISO 7731:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) | https://standardsdrift.com/standards/en-iso-7731-2008/ | EN ISO 8098:2014 | General Product Safety | cited | 2015-10-09 | | | 2024-12-13 | Cycles - Safety requirements for bicycles for young children (ISO 8098:2014) | https://standardsdrift.com/standards/en-iso-8098-2014/ | EN ISO 8230-1:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) | https://standardsdrift.com/standards/en-iso-8230-1-2008/ | EN ISO 8230-2:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) | https://standardsdrift.com/standards/en-iso-8230-2-2008/ | EN ISO 8230-3:2008 | Machinery | ceasing | 2009-09-08 | 2027-01-20 | | 2026-09-28 | Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) | https://standardsdrift.com/standards/en-iso-8230-3-2008/ | EN ISO 8437-1:2021 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests (ISO 8437-1:2019) | https://standardsdrift.com/standards/en-iso-8437-1-2021/ | EN ISO 8437-1:2021/A1:2026 EN ISO 8437-2:2021 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Snow throwers - Safety requirements and test procedures - Part 2: Pedestrian-controlled snow throwers (ISO 8437-2:2019) | https://standardsdrift.com/standards/en-iso-8437-2-2021/ | EN ISO 8437-2:2021/A1:2026 EN ISO 8437-3:2021 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Snow throwers - Safety requirements and test procedures - Part 3: Ride-on snow throwers (ISO 8437-3:2019) | https://standardsdrift.com/standards/en-iso-8437-3-2021/ | EN ISO 8437-3:2021/A1:2026 EN ISO 8437-4:2021 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Snow throwers - Safety requirements and test procedures - Part 4: Additional national and regional requirements (ISO 8437-4:2019) | https://standardsdrift.com/standards/en-iso-8437-4-2021/ | EN ISO 8437-4:2021/A1:2026 EN ISO 8528-10:2022 | Machinery | ceasing | 2023-08-02 | 2027-01-20 | 2023/1586 | 2026-09-28 | Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022) | https://standardsdrift.com/standards/en-iso-8528-10-2022/ | EN ISO 8528-13:2016 | Machinery | ceasing | 2016-09-09 | 2027-01-20 | | 2026-09-28 | Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) | https://standardsdrift.com/standards/en-iso-8528-13-2016/ | EN ISO 8528-13:2026 | Machinery | ceasing | 2026-09-07 | 2027-01-20 | 2026/2015 | 2026-09-28 | Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO/FDIS 8528-13:2025) | https://standardsdrift.com/standards/en-iso-8528-13-2026/ | EN ISO 9614-1:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) | https://standardsdrift.com/standards/en-iso-9614-1-2009/ | EN ISO 9614-3:2009 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) | https://standardsdrift.com/standards/en-iso-9614-3-2009/ | EN ISO 9902-1:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) | https://standardsdrift.com/standards/en-iso-9902-1-2001/ | EN ISO 9902-1:2001/A1:2009, EN ISO 9902-1:2001/A2:2014 EN ISO 9902-2:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) | https://standardsdrift.com/standards/en-iso-9902-2-2001/ | EN ISO 9902-2:2001/A1:2009, EN ISO 9902-2:2001/A2:2014 EN ISO 9902-3:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) | https://standardsdrift.com/standards/en-iso-9902-3-2001/ | EN ISO 9902-3:2001/A1:2009, EN ISO 9902-3:2001/A2:2014 EN ISO 9902-4:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) | https://standardsdrift.com/standards/en-iso-9902-4-2001/ | EN ISO 9902-4:2001/A1:2009, EN ISO 9902-4:2001/A2:2014 EN ISO 9902-5:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) | https://standardsdrift.com/standards/en-iso-9902-5-2001/ | EN ISO 9902-5:2001/A1:2009, EN ISO 9902-5:2001/A2:2014 EN ISO 9902-6:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) | https://standardsdrift.com/standards/en-iso-9902-6-2001/ | EN ISO 9902-6:2001/A1:2009, EN ISO 9902-6:2001/A2:2014 EN ISO 9902-7:2001 | Machinery | ceasing | 2009-12-18 | 2027-01-20 | | 2026-09-28 | Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) | https://standardsdrift.com/standards/en-iso-9902-7-2001/ | EN ISO 9902-7:2001/A1:2009, EN ISO 9902-7:2001/A2:2014 EN ISO 9994:2019 | General Product Safety | cited | 2022-08-16 | | 2022/1401 | 2024-12-13 | Lighters - Safety specification (ISO 9994:2018) | https://standardsdrift.com/standards/en-iso-9994-2019/ | EN ISO/IEC 80079-38:2016 | Machinery | ceasing | 2019-03-19 | 2027-01-20 | 2019/436 | 2026-09-28 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | https://standardsdrift.com/standards/en-iso-iec-80079-38-2016/ | EN ISO/IEC 80079-38:2016/A1:2018 EN 18286:2026 | AI Act | published | | | | 2026-07-22 | Published by the ESO, not yet cited: Quality management system for EU AI Act regulatory purposes | https://standardsdrift.com/standards/en-18286-2026/ EN 304 617 | Cyber Resilience Act | draft | | | | 2026-09-28 | In drafting: CRA essential cyber reqts for browsers Topic # 17 | https://standardsdrift.com/standards/en-304-617/ EN 304 618 | Cyber Resilience Act | draft | | | | 2026-09-22 | In drafting: CRA password managers Topic # 18 full | https://standardsdrift.com/standards/en-304-618/ EN 304 619 | Cyber Resilience Act | draft | | | | 2026-10-01 | In drafting: CRA antivirus software Topic # 19 full | https://standardsdrift.com/standards/en-304-619/ EN 304 620 | Cyber Resilience Act | draft | | | | 2026-09-28 | In drafting: CRA VPNs Topic # 20 | https://standardsdrift.com/standards/en-304-620/ EN 304 621 | Cyber Resilience Act | draft | | | | 2026-08-13 | In drafting: CRA Network Management Topic # 21 | https://standardsdrift.com/standards/en-304-621/ EN 304 622 | Cyber Resilience Act | draft | | | | 2026-08-13 | In drafting: CRA SIEM systemsTopic # 22 | https://standardsdrift.com/standards/en-304-622/ EN 304 623 | Cyber Resilience Act | draft | | | | 2026-09-16 | In drafting: CRA boot managersTopic # 23 Full | https://standardsdrift.com/standards/en-304-623/ EN 304 624 | Cyber Resilience Act | draft | | | | 2026-08-10 | In drafting: CRA PKI and digital certificate issuance software - Topic #24 | https://standardsdrift.com/standards/en-304-624/ EN 304 625 | Cyber Resilience Act | draft | | | | 2026-09-28 | In drafting: Essential cybersec reqts for physical and virtual network interfaces | https://standardsdrift.com/standards/en-304-625/ EN 304 626 | Cyber Resilience Act | draft | | | | 2026-09-28 | In drafting: CRA operating systemsTopic # 26 Part 1/N | https://standardsdrift.com/standards/en-304-626/ EN 304 627 | Cyber Resilience Act | draft | | | | 2026-10-01 | In drafting: CRA routers, modems, and switches Topic # 27 Part 1/2 | https://standardsdrift.com/standards/en-304-627/ EN 304 631 | Cyber Resilience Act | draft | | | | 2026-09-17 | In drafting: CRA Smart home assistants Topic # 31 full | https://standardsdrift.com/standards/en-304-631/ EN 304 632 | Cyber Resilience Act | draft | | | | 2026-09-11 | In drafting: CRA Smart home security products Topic # 32 full | https://standardsdrift.com/standards/en-304-632/ EN 304 633 | Cyber Resilience Act | draft | | | | 2026-09-11 | In drafting: CRA Internet connected toys Topic # 33 full scope | https://standardsdrift.com/standards/en-304-633/ EN 304 634 | Cyber Resilience Act | draft | | | | 2026-09-23 | In drafting: CRA Personal wearables Topic # 34 full scope | https://standardsdrift.com/standards/en-304-634/ EN 304 635 | Cyber Resilience Act | draft | | | | 2026-09-17 | In drafting: Essential cybersec reqts for hypervisors and container runtime systems | https://standardsdrift.com/standards/en-304-635/ EN 304 636 | Cyber Resilience Act | draft | | | | 2026-10-06 | In drafting: Essential cybersec reqts for firewalls, intrusion detection and prevention systems | https://standardsdrift.com/standards/en-304-636/ EN 304 642 | Cyber Resilience Act | draft | | | | 2026-07-31 | In drafting: Cybersecurity reqts for Network functions of Telecoms systems | https://standardsdrift.com/standards/en-304-642/ prCEN/CLC/TR 18347 | AI Act | draft | | | | 2025-10-17 | In drafting: Overview and architecture of standards in support of the EU AI Act | https://standardsdrift.com/standards/prcen-clc-tr-18347/ prEN 18228 | AI Act | draft | | | | 2026-07-30 | Under approval: AI Risk Management | https://standardsdrift.com/standards/pren-18228/ prEN 18229-1 | AI Act | draft | | | | 2026-08-20 | Under approval: AI trustworthiness framework – Part 1: Logging | https://standardsdrift.com/standards/pren-18229-1/ prEN 18229-2 | AI Act | draft | | | | 2026-01-06 | In drafting: AI trustworthiness framework – Part 2: Transparency | https://standardsdrift.com/standards/pren-18229-2/ prEN 18229-3 | AI Act | draft | | | | 2026-07-30 | Public enquiry: AI trustworthiness framework – Part 3: Human oversight | https://standardsdrift.com/standards/pren-18229-3/ prEN 18229-4 | AI Act | draft | | | | 2026-06-24 | In drafting: AI trustworthiness framework – Part 4: Accuracy | https://standardsdrift.com/standards/pren-18229-4/ prEN 18229-5 | AI Act | draft | | | | 2026-06-24 | In drafting: AI trustworthiness framework – Part 5: Robustness | https://standardsdrift.com/standards/pren-18229-5/ prEN 18281 | AI Act | draft | | | | 2026-06-11 | Under approval: Evaluation methods for accurate computer vision systems | https://standardsdrift.com/standards/pren-18281/ prEN 18282 | AI Act | draft | | | | 2026-07-30 | Under approval: Cybersecurity specifications for AI systems | https://standardsdrift.com/standards/pren-18282/ prEN 18283 | AI Act | draft | | | | 2026-10-01 | Public enquiry: Concepts, measures and requirements for managing bias in AI systems | https://standardsdrift.com/standards/pren-18283/ prEN 18284 | AI Act | draft | | | | 2024-09-05 | In drafting: Quality and governance of datasets in AI | https://standardsdrift.com/standards/pren-18284/ prEN 18285 | AI Act | draft | | | | 2024-10-16 | In drafting: AI conformity assessment framework | https://standardsdrift.com/standards/pren-18285/ prEN 18288 | AI Act | draft | | | | 2026-07-16 | Under approval: Taxonomy of AI tasks in computer vision | https://standardsdrift.com/standards/pren-18288/ prEN ISO/IEC 23282 | AI Act | draft | | | | 2026-09-03 | Public enquiry: Evaluation methods for accurate natural-language-processing systems | https://standardsdrift.com/standards/pren-iso-iec-23282/ prEN ISO/IEC 24970 | AI Act | draft | | | | 2026-08-27 | Under approval: AI system logging | https://standardsdrift.com/standards/pren-iso-iec-24970/