STANDARDS DRIFT
  1. Home
  2. Standards
  3. Machinery
  4. Decision (EU) 2020/480

Machinery · implementing decision

Commission Implementing Decision (EU) 2020/480: Machinery harmonised standards it cited and withdrew

Machinery Directive 2006/42/EC and Machinery Regulation (EU) 2023/1230. What the Commission's summary list attributes to this decision; the decision text itself is on EUR-Lex. Record as of 8 October 2026.

Commission Implementing Decision (EU) 2020/480, Official Journal dates 19 March 2019 to 2 April 2020, is named on the Machinery list as the citing decision for 28 references and as the withdrawing decision for 26, as of 8 October 2026.

The "Cited by" and "Withdrawn by" columns are the Commission's own. A decision can appear on both sides: it cites a newer edition and sets an end of legal effect on the older one. Each reference links to its dated page.

References this decision cited (28)

ReferenceTitleStatus todayOJ date on the rowEnd of legal effect
EN 1114-3:2019Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offsCited, cessation date set2 April 202020 January 2027
EN 1127-1:2019Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodologyCited, cessation date set2 April 202020 January 2027
EN 12012-1:2018Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators andCited, cessation date set2 April 202020 January 2027
EN 12312-8:2018Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platformCited, cessation date set2 April 202020 January 2027
EN 12733:2018Agricultural and forestry machinery - Pedestrian controlled motor mowers - SafetyCited, cessation date set2 April 202020 January 2027
EN 14033-4:2019Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirementCited, cessation date set2 April 202020 January 2027
EN 1459-2:2015+A1:2018Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucksCited, cessation date set2 April 202020 January 2027
EN 16712-4:2018Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipmenCited, cessation date set2 April 202020 January 2027
EN 16770:2018Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirementCited, cessation date set2 April 202020 January 2027
EN 16985:2018Spray booths for organic coating material - Safety requirementsCited, cessation date set2 April 202020 January 2027
EN 17067:2018Forestry machinery - Safety requirements on radio remote controlsCited, cessation date set2 April 202020 January 2027
EN 60204-1:2018Safety of machinery - Electrical equipment of machines - Part 1: General requirementsCited, cessation date set2 April 202020 January 2027
EN 62841-2-1:2018Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1Cited, cessation date set2 April 20202 February 2025
EN 62841-2-21:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2Cited, cessation date set2 April 202020 January 2027
EN 62841-3-12:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1Cited, cessation date set2 April 202020 January 2027
EN 62841-4-2:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2Cited, cessation date set2 April 20202 February 2025
EN 707:2018Agricultural machinery - Slurry tankers - SafetyCited, cessation date set2 April 202020 January 2027
EN IEC 60204-11:2019Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages abovCited, cessation date set2 April 202020 January 2027
EN ISO 10517:2019Powered hand-held hedge trimmers - Safety (ISO 10517:2019)Cited, cessation date set2 April 202020 January 2027
EN ISO 11148-13:2018Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)Cited, cessation date set2 April 202020 January 2027
EN ISO 18497:2018Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for designCited, cessation date set2 April 202020 January 2027
EN ISO 19085-7:2019Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planingCited, cessation date set2 April 202020 January 2027
EN ISO 19296:2018Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)Cited, cessation date set2 April 202020 January 2027
EN ISO 19353:2019Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)Cited, cessation date set2 April 202020 January 2027
EN ISO 20607:2019Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019)Cited, cessation date set2 April 202020 January 2027
EN ISO 28927-4:2010Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grindersCited, cessation date set2 April 202020 January 2027
EN ISO 3691-5:2015Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:201Cited, cessation date set2 April 20203 September 2022
EN ISO 4254-9:2018Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)Cited, cessation date set2 April 202020 January 2027

References this decision withdrew or gave an end of legal effect (26)

ReferenceTitleStatus todayOJ date on the rowEnd of legal effect
EN 1114-3:2001+A1:2008Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offsPresumption ended8 September 20092 October 2021
EN 1127-1:2011Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodologyPresumption ended18 November 20112 October 2021
EN 12012-1:2007+A1:2008Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulatorsPresumption ended8 September 20092 October 2021
EN 12012-3:2001+A1:2008Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shreddersPresumption ended8 September 20092 October 2021
EN 12312-8:2005+A1:2009Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platformsPresumption ended8 September 20092 October 2021
EN 12733:2001+A1:2009Agricultural and forestry machinery - Pedestrian controlled motor mowers - SafetyPresumption ended8 September 20092 October 2021
EN 12981:2005+A1:2009Coating plants - Spray booths for application of organic powder coating material - Safety requirementsPresumption ended8 September 20092 October 2021
EN 13355:2004+A1:2009Coating plants - Combined booths - Safety requirementsPresumption ended8 September 20092 October 2021
EN 14018:2005+A1:2009Agricultural and forestry machinery - Seed drills - SafetyPresumption ended18 December 20092 October 2021
EN 1459-2:2015Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucksPresumption ended15 January 20162 October 2021
EN 1889-1:2011Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehiclesPresumption ended18 November 20112 October 2021
EN 60204-11:2000Safety of machinery - Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages Presumption ended26 May 20102 October 2021
EN 60204-1:2006Safety of machinery - Electrical equipment of machines -- Part 1: General requirementsPresumption ended26 May 20102 October 2021
EN 60745-2-21:2009Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleanersPresumption ended20 July 20112 October 2021
EN 62841-2-1:2018Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1Cited, cessation date set19 March 20192 October 2021
EN 707:1999+A1:2009Agricultural machinery - Slurry tankers - SafetyPresumption ended18 December 20092 October 2021
EN 792-13:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving toolsPresumption ended8 September 20092 October 2021
EN 848-3:2012Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controllePresumption ended5 April 20132 October 2021
EN 859:2007+A2:2012Safety of woodworking machines - Hand fed surface planing machinesPresumption ended24 August 20122 October 2021
EN 860:2007+A2:2012Safety of woodworking machines - One side thickness planing machinesPresumption ended24 August 20122 October 2021
EN 861:2007+A2:2012Safety of woodworking machines - Surface planing and thicknessing machinesPresumption ended24 August 20122 October 2021
EN ISO 10517:2009Powered hand-held hedge trimmers - Safety (ISO 10517:2009)Presumption ended28 November 20132 October 2021
EN ISO 19353:2016Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)Presumption ended9 September 20162 October 2021
EN ISO 28927-2:2009Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunnCited, cessation date set26 May 20102 October 2021
EN ISO 28927-4:2010Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grindersCited, cessation date set8 April 20112 April 2020
EN ISO 3691-5:2014Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:201Presumption ended11 July 20142 October 2021