STANDARDS DRIFT
  1. Home
  2. Standards
  3. Machinery
  4. Presumption ended

Machinery · Presumption ended

Machinery standards whose presumption of conformity has ended

Machinery Directive 2006/42/EC and Machinery Regulation (EU) 2023/1230. Rebuilt daily from the Commission's summary list. Record as of 8 October 2026; last movement on this set 28 September 2026.

435 Machinery standard references have an end of legal effect that has passed on every entry, so they no longer give presumption of conformity under Machinery Directive 2006/42/EC and Machinery Regulation (EU) 2023/1230, as of 8 October 2026.

Every entry for this reference carries an end of legal effect that has passed. The table is the full set, most recently ended first. Every reference links to its dated page with the Commission's own columns.

Dates are the Commission's own; blank means the list gives none. "Last moved" is the last day a row for this reference changed.
ReferenceTitleStatusFirst in OJEnd of legal effectLast moved
EN 15194:2017Cycles - Electrically power assisted cycles - EPAC BicyclesPresumption ended19 Mar 201915 May 202615 May 2026
EN 13557:2003+A2:2008Cranes - Controls and control stationsPresumption ended08 Sep 200916 Mar 202616 Mar 2026
EN 1570-1:2011+A1:2014Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landingsPresumption ended13 May 201616 Mar 202616 Mar 2026
EN 16005:2012Power operated pedestrian doorsets - Safety in use - Requirements and test methodsPresumption ended05 Apr 201316 Mar 202616 Mar 2026
EN 1218-1:1999+A1:2009Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding tablePresumption ended18 Dec 200915 Nov 202515 Nov 2025
EN 1218-2:2004+A1:2009Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fedPresumption ended08 Sep 200915 Nov 202515 Nov 2025
EN 1218-5:2004+A1:2009Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and Presumption ended18 Dec 200915 Nov 202515 Nov 2025
EN 1417:2014Plastics and rubber machines - Two-roll mills - Safety requirementsPresumption ended15 Jan 201615 Nov 202515 Nov 2025
EN 1501-4:2007Refuse collection vehicles and their associated lifting devices - General requirements and safety requirementsPresumption ended08 Sep 200915 Nov 202515 Nov 2025
EN 15700:2011Safety for conveyor belts for winter sport or leisure usePresumption ended29 Feb 201215 Nov 202515 Nov 2025
EN 16307-5:2013Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-pPresumption ended11 Jul 201415 Nov 202515 Nov 2025
EN 16590-1:2014Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: GeneraPresumption ended13 Feb 201515 Nov 202515 Nov 2025
EN 16590-2:2014Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: ConcepPresumption ended13 Feb 201515 Nov 202515 Nov 2025
EN 16590-3:2014Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: SeriesPresumption ended13 Feb 201515 Nov 202515 Nov 2025
EN 16590-4:2014Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: ProducPresumption ended13 Feb 201515 Nov 202515 Nov 2025
EN 1915-1:2013Aircraft ground support equipment - General requirements - Part 1: Basic safety requirementsPresumption ended28 Nov 201315 Nov 202515 Nov 2025
EN 1034-4:2005+A1:2009Safety of machinery - Safety requirements for the design and construction of paper making and finishing machinPresumption ended26 May 201002 Feb 202502 Feb 2025
EN 12158-1:2000+A1:2010Builders' hoists for goods - Part 1: Hoists with accessible platformsPresumption ended08 Apr 201102 Feb 202502 Feb 2025
EN 12355:2003+A1:2010Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requiremePresumption ended20 Oct 201002 Feb 202502 Feb 2025
EN 12418:2000+A1:2009Masonry and stone cutting-off machines for job site - SafetyPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 12750:2013Safety of woodworking machines - Four sided moulding machinesPresumption ended28 Nov 201302 Feb 202502 Feb 2025
EN 13001-3-5:2016Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooksPresumption ended09 Jun 201702 Feb 202502 Feb 2025
EN 13019:2001+A1:2008Machines for road surface cleaning - Safety requirementsPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 13021:2003+A1:2008Winter service machines - Safety requirementsPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 13118:2000+A1:2009Agricultural machinery - Potato harvesting equipment - SafetyPresumption ended18 Dec 200902 Feb 202502 Feb 2025
EN 13140:2000+A1:2009Agricultural machinery - Sugar beet and fodder beet harvesting equipment - SafetyPresumption ended18 Dec 200902 Feb 202502 Feb 2025
EN 13524:2003+A2:2014Highway maintenance machines - Safety requirementsPresumption ended11 Jul 201402 Feb 202502 Feb 2025
EN 13617-1:2012Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispPresumption ended24 Aug 201202 Feb 202502 Feb 2025
EN 13732:2013Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygienePresumption ended28 Nov 201302 Feb 202502 Feb 2025
EN 13862:2001+A1:2009Floor cutting-off machines - SafetyPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 13870:2015Food processing machinery - Portion cutting machines - Safety and hygiene requirementsPresumption ended15 Jan 201602 Feb 202502 Feb 2025
EN 13885:2005+A1:2010Food processing machinery - Clipping machines - Safety and hygiene requirementsPresumption ended20 Oct 201002 Feb 202502 Feb 2025
EN 15967:2011Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapoursPresumption ended18 Nov 201102 Feb 202502 Feb 2025
EN 16228-1:2014Drilling and foundation equipment - Safety - Part 1: Common requirementsPresumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-2:2014Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering,Presumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-3:2014Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)Presumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-4:2014Drilling and foundation equipment - Safety - Part 4: Foundation equipmentPresumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-5:2014Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipmentPresumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-6:2014Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipmentPresumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16228-7:2014Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipmentPresumption ended13 Feb 201502 Feb 202502 Feb 2025
EN 16952:2018Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - SafetyPresumption ended19 Mar 201902 Feb 202502 Feb 2025
EN 1807-1:2013Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-sawsPresumption ended28 Nov 201302 Feb 202502 Feb 2025
EN 280:2013+A1:2015Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - ExaminatiPresumption ended15 Jan 201602 Feb 202502 Feb 2025
EN 303-5:2021Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat outPresumption ended13 Apr 202202 Feb 202502 Feb 2025
EN 415-3:1999+A1:2009Safety of packaging machines - Part 3: Form, fill and seal machinesPresumption ended18 Dec 200902 Feb 202502 Feb 2025
EN 474-10:2006+A1:2009Earth-moving machinery - Safety - Part 10: Requirements for trenchersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-11:2006+A1:2008Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactorsPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-12:2006+A1:2008Earth-moving machinery - Safety - Part 12: Requirements for cable excavatorsPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-1:2006+A6:2019Earth-moving machinery - Safety - Part 1: General requirementsPresumption ended15 Oct 202102 Feb 202502 Feb 2025
EN 474-2:2006+A1:2008Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-3:2006+A1:2009Earth-moving machinery - Safety - Part 3: Requirements for loadersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-4:2006+A2:2012Earth-moving machinery - Safety - Part 4: Requirements for backhoe loadersPresumption ended23 Mar 201202 Feb 202502 Feb 2025
EN 474-5:2006+A3:2013Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavatorsPresumption ended28 Nov 201302 Feb 202502 Feb 2025
EN 474-6:2006+A1:2009Earth-moving machinery - Safety - Part 6: Requirements for dumpersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-7:2006+A1:2009Earth-moving machinery - Safety - Part 7: Requirements for scrapersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-8:2006+A1:2009Earth-moving machinery - Safety - Part 8: Requirements for gradersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 474-9:2006+A1:2009Earth-moving machinery - Safety - Part 9: Requirements for pipelayersPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN 500-4:2011Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machinesPresumption ended20 Jul 201102 Feb 202502 Feb 2025
EN 60335-2-77:2010Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walkPresumption ended08 Apr 201102 Feb 202502 Feb 2025
EN 60335-2-89:2010Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrPresumption ended09 Sep 201602 Feb 202528 Sep 2026
EN 60745-2-15:2009Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmersPresumption ended18 Dec 200902 Feb 202502 Feb 2025
EN 60745-2-3:2011Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers aPresumption ended18 Nov 201102 Feb 202502 Feb 2025
EN 619:2002+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling Presumption ended08 Apr 201102 Feb 202502 Feb 2025
EN 620:2002+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk matePresumption ended08 Apr 201102 Feb 202502 Feb 2025
EN 703:2004+A1:2009Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - SafetyPresumption ended18 Dec 200902 Feb 202502 Feb 2025
EN 710:1997+A1:2010Safety requirements for foundry moulding and coremaking machinery and plant associated equipmentPresumption ended20 Oct 201002 Feb 202502 Feb 2025
EN 746-3:1997+A1:2009Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gPresumption ended08 Sep 200902 Feb 202502 Feb 2025
EN ISO 11680-1:2011Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 11680-2:2011Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines fPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 11681-1:2011Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest sePresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 11681-2:2011Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree servPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 11806-1:2011Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 11806-2:2011Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 18217:2015Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)Presumption ended15 Jan 201602 Feb 202502 Feb 2025
EN ISO 19085-2:2017Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, CorrPresumption ended09 Mar 201802 Feb 202502 Feb 2025
EN ISO 19085-3:2017Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (Presumption ended24 Oct 201902 Feb 202502 Feb 2025
EN ISO 22867:2011Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustioPresumption ended29 Feb 201202 Feb 202502 Feb 2025
EN ISO 28881:2013Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)Presumption ended28 Nov 201302 Feb 202502 Feb 2025
EN ISO 28927-1:2009Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and verticaPresumption ended26 May 201002 Feb 202502 Feb 2025
EN ISO 3691-6:2015Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2Presumption ended13 May 201602 Feb 202502 Feb 2025
EN ISO 4254-6:2009Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)Presumption ended26 May 201002 Feb 202502 Feb 2025
EN 12012-4:2006+A1:2008Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomeratorsPresumption ended08 Sep 200902 Feb 202402 Feb 2024
EN 12331:2003+A2:2010Food processing machinery - Mincing machines - Safety and hygiene requirementsPresumption ended20 Oct 201002 Feb 202402 Feb 2024
EN 15163:2008Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diPresumption ended08 Sep 200902 Feb 202402 Feb 2024
EN 1755:2000+A2:2013Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mPresumption ended28 Nov 201302 Feb 202402 Feb 2024
EN 528:2008Rail dependent storage and retrieval equipment - Safety requirementsPresumption ended08 Sep 200902 Feb 202402 Feb 2024
EN 12312-5:2005+A1:2009Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipmentPresumption ended08 Sep 200911 Oct 202311 Oct 2023
EN 13001-2:2014Crane safety - General design - Part 2: Load actionsPresumption ended15 Jan 201611 Oct 202311 Oct 2023
EN 13001-3-6:2018Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylindersPresumption ended19 Mar 201911 Oct 202311 Oct 2023
EN 1501-1:2011+A1:2015Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collectPresumption ended15 Jan 201611 Oct 202311 Oct 2023
EN 1501-2:2005+A1:2009Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - ParPresumption ended29 Dec 200911 Oct 202311 Oct 2023
EN 1501-3:2008Refuse collection vehicles and their associated lifting devices - General requirements and safety requirementsPresumption ended08 Sep 200911 Oct 202311 Oct 2023
EN 1501-5:2011Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refusePresumption ended18 Nov 201111 Oct 202311 Oct 2023
EN 1756-1:2001+A1:2008Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goPresumption ended08 Sep 200911 Oct 202311 Oct 2023
EN 1829-1:2010High pressure water jet machines - Safety requirements - Part 1: MachinesPresumption ended26 May 201011 Oct 202311 Oct 2023
EN 303-5:2012Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat outPresumption ended24 Aug 201211 Oct 202311 Oct 2023
EN 62061:2005Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic cPresumption ended26 May 201011 Oct 202311 Oct 2023
EN ISO 19085-1:2017Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)Presumption ended09 Mar 201811 Oct 202311 Oct 2023
EN ISO 22868:2011Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion enPresumption ended20 Jul 201111 Oct 202311 Oct 2023
EN 60745-2-13:2009Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain sawsPresumption ended18 Dec 200903 May 202303 May 2023
EN 1175-1:1998+A1:2010Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered truckPresumption ended08 Apr 201115 Apr 202315 Apr 2023
EN 1175-2:1998+A1:2010Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion enPresumption ended08 Apr 201115 Apr 202315 Apr 2023
EN 1175-3:1998+A1:2010Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power tPresumption ended08 Apr 201115 Apr 202315 Apr 2023
EN 12312-3:2017Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehiclesPresumption ended09 Jun 201715 Apr 202315 Apr 2023
EN 12312-7:2005+A1:2009Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipmentPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 12999:2011+A2:2018Cranes - Loader cranesPresumption ended19 Mar 201915 Apr 202315 Apr 2023
EN 13411-1:2002+A1:2008Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slingsPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-2:2001+A1:2008Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slingsPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-3:2004+A1:2008Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securingPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-4:2011Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketingPresumption ended20 Jul 201115 Apr 202315 Apr 2023
EN 13411-5:2003+A1:2008Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope gripsPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-6:2004+A1:2008Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socketPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-7:2006+A1:2008Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socketPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 13411-8:2011Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swagingPresumption ended18 Nov 201115 Apr 202315 Apr 2023
EN 13586:2004+A1:2008Cranes - AccessPresumption ended08 Sep 200915 Apr 202315 Apr 2023
EN 15011:2011+A1:2014Cranes - Bridge and gantry cranesPresumption ended11 Jul 201415 Apr 202315 Apr 2023
EN 16307-1:2013+A1:2015Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propellPresumption ended15 Jan 201615 Apr 202315 Apr 2023
EN 16486:2014Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirementsPresumption ended15 Jan 201615 Apr 202315 Apr 2023
EN 16851:2017Cranes - Light crane systemsPresumption ended09 Jun 201715 Apr 202315 Apr 2023
EN 1804-1:2001+A1:2010Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support uniPresumption ended26 May 201015 Apr 202315 Apr 2023
EN 1804-2:2001+A1:2010Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set lPresumption ended26 May 201015 Apr 202315 Apr 2023
EN 1804-3:2006+A1:2010Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic cPresumption ended26 May 201015 Apr 202315 Apr 2023
EN 1837:1999+A1:2009Safety of machinery - Integral lighting of machinesPresumption ended18 Dec 200915 Apr 202315 Apr 2023
EN 1974:1998+A1:2009Food processing machinery - Slicing machines - Safety and hygiene requirementsPresumption ended18 Dec 200915 Apr 202315 Apr 2023
EN 201:2009Plastics and rubber machines - Injection moulding machines - Safety requirementsPresumption ended18 Dec 200915 Apr 202315 Apr 2023
EN 60745-2-6:2010Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammersPresumption ended20 Oct 201015 Apr 202315 Apr 2023
EN ISO 11553-1:2008Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)Presumption ended08 Sep 200915 Apr 202315 Apr 2023
EN ISO 3743-2:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods foPresumption ended18 Dec 200915 Apr 202315 Apr 2023
EN 12301:2000+A1:2008Plastics and rubber machines - Calenders - Safety requirementsPresumption ended08 Sep 200903 Sep 202203 Sep 2022
EN 12643:2014Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)Presumption ended11 Jul 201403 Sep 202203 Sep 2022
EN 12965:2003+A2:2009Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - SafPresumption ended18 Dec 200903 Sep 202203 Sep 2022
EN 1612-1:1997+A1:2008Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixinPresumption ended08 Sep 200903 Sep 202203 Sep 2022
EN 1870-19:2013Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without slPresumption ended11 Apr 201403 Sep 202203 Sep 2022
EN 1870-4:2012Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manualPresumption ended05 Jun 201203 Sep 202203 Sep 2022
EN 349:1993+A1:2008Safety of machinery - Minimum gaps to avoid crushing of parts of the human bodyPresumption ended08 Sep 200903 Sep 202203 Sep 2022
EN 574:1996+A1:2008Safety of machinery - Two-hand control devices - Functional aspects - Principles for designPresumption ended08 Sep 200903 Sep 202203 Sep 2022
EN 62841-3-9:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9Presumption ended13 May 201603 Sep 202203 Sep 2022
EN 940:2009+A1:2012Safety of woodworking machines - Combined woodworking machinesPresumption ended05 Jun 201203 Sep 202203 Sep 2022
EN ISO 13857:2008Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 138Presumption ended08 Sep 200903 Sep 202203 Sep 2022
EN ISO 15012-4:2016Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - ParPresumption ended09 Jun 201703 Sep 202203 Sep 2022
EN ISO 19432:2012Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-offPresumption ended15 Nov 201203 Sep 202203 Sep 2022
EN ISO 20361:2015Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)Presumption ended09 Sep 201603 Sep 202203 Sep 2022
EN ISO 7096:2008Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)Presumption ended08 Sep 200903 Sep 202203 Sep 2022
EN 60745-2-1:2010Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact driPresumption ended20 Oct 201019 Jan 202219 Jan 2022
EN 60745-1:2009Hand-held motor-operated electric tools - Safety - Part 1: General requirementsPresumption ended18 Dec 200915 Dec 202115 Dec 2021
EN 60745-2-17:2010Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmersPresumption ended08 Apr 201115 Dec 202115 Dec 2021
EN 61029-1:2009Safety of transportable motor-operated electric tools - Part 1: General requirementsPresumption ended18 Dec 200915 Dec 202115 Dec 2021
EN 474-1:2006+A5:2018Earth-moving machinery - Safety - Part 1: General requirementsPresumption ended19 Mar 201915 Oct 202115 Oct 2021
EN 1114-3:2001+A1:2008Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 1127-1:2011Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodologyPresumption ended18 Nov 201102 Oct 202102 Oct 2021
EN 12012-1:2007+A1:2008Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulatorsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 12012-3:2001+A1:2008Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shreddersPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 12312-8:2005+A1:2009Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platformsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 12733:2001+A1:2009Agricultural and forestry machinery - Pedestrian controlled motor mowers - SafetyPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 12981:2005+A1:2009Coating plants - Spray booths for application of organic powder coating material - Safety requirementsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 13355:2004+A1:2009Coating plants - Combined booths - Safety requirementsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 14018:2005+A1:2009Agricultural and forestry machinery - Seed drills - SafetyPresumption ended18 Dec 200902 Oct 202102 Oct 2021
EN 1459-2:2015Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucksPresumption ended15 Jan 201602 Oct 202102 Oct 2021
EN 1889-1:2011Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehiclesPresumption ended18 Nov 201102 Oct 202102 Oct 2021
EN 60204-11:2000Safety of machinery - Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages Presumption ended26 May 201002 Oct 202128 Sep 2026
EN 60204-1:2006Safety of machinery - Electrical equipment of machines -- Part 1: General requirementsPresumption ended26 May 201002 Oct 202128 Sep 2026
EN 60745-2-21:2009Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleanersPresumption ended18 Dec 200902 Oct 202102 Oct 2021
EN 707:1999+A1:2009Agricultural machinery - Slurry tankers - SafetyPresumption ended18 Dec 200902 Oct 202102 Oct 2021
EN 792-13:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving toolsPresumption ended08 Sep 200902 Oct 202102 Oct 2021
EN 848-3:2012Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controllePresumption ended05 Apr 201302 Oct 202102 Oct 2021
EN 859:2007+A2:2012Safety of woodworking machines - Hand fed surface planing machinesPresumption ended24 Aug 201202 Oct 202102 Oct 2021
EN 860:2007+A2:2012Safety of woodworking machines - One side thickness planing machinesPresumption ended24 Aug 201202 Oct 202102 Oct 2021
EN 861:2007+A2:2012Safety of woodworking machines - Surface planing and thicknessing machinesPresumption ended24 Aug 201202 Oct 202102 Oct 2021
EN ISO 10517:2009Powered hand-held hedge trimmers - Safety (ISO 10517:2009)Presumption ended18 Dec 200902 Oct 202102 Oct 2021
EN ISO 19353:2016Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)Presumption ended09 Sep 201602 Oct 202102 Oct 2021
EN ISO 3691-5:2014Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:201Presumption ended11 Jul 201402 Oct 202102 Oct 2021
EN 13736:2003+A1:2009Safety of machine tools - Pneumatic pressesPresumption ended08 Sep 200919 Sep 202119 Sep 2021
EN 692:2005+A1:2009Machine tools - Mechanical presses - SafetyPresumption ended08 Sep 200919 Sep 202119 Sep 2021
EN 693:2001+A2:2011Machine tools - Safety - Hydraulic pressesPresumption ended18 Nov 201119 Mar 202119 Mar 2021
EN 1037:1995+A1:2008Safety of machinery - Prevention of unexpected start-upPresumption ended08 Sep 200919 Sep 202019 Sep 2020
EN 12013:2000+A1:2008Plastics and rubber machines - Internal mixers - Safety requirementsPresumption ended08 Sep 200919 Sep 202019 Sep 2020
EN 12999:2011+A1:2012Cranes - Loader cranesPresumption ended24 Aug 201219 Sep 202019 Sep 2020
EN 13001-3-1:2012+A1:2013Cranes - General Design - Part 3-1: Limit States and proof competence of steel structurePresumption ended28 Nov 201319 Sep 202019 Sep 2020
EN 13135:2013Cranes - Safety - Design - Requirements for equipmentPresumption ended28 Nov 201319 Sep 202019 Sep 2020
EN 13684:2004+A3:2009Garden equipment - Pedestrian controlled lawn aerators and scarifiers - SafetyPresumption ended26 May 201019 Sep 202019 Sep 2020
EN 14017:2005+A2:2009Agricultural and forestry machinery - Solid fertilizer distributors - SafetyPresumption ended18 Dec 200919 Sep 202019 Sep 2020
EN 15895:2011Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking toolsPresumption ended18 Nov 201119 Sep 202019 Sep 2020
EN 1853:1999+A1:2009Agricultural machinery - Trailers with tipping body - SafetyPresumption ended18 Dec 200919 Sep 202019 Sep 2020
EN 1870-13:2007+A2:2012Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machinesPresumption ended05 Jun 201219 Sep 202019 Sep 2020
EN 1870-14:2007+A2:2012Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machinesPresumption ended05 Jun 201219 Sep 202019 Sep 2020
EN 1870-6:2002+A1:2009Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and Presumption ended18 Dec 200919 Sep 202019 Sep 2020
EN 474-1:2006+A4:2013Earth-moving machinery - Safety - Part 1: General requirementsPresumption ended28 Nov 201319 Sep 202019 Sep 2020
EN 61496-1:2013Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and testsPresumption ended11 Apr 201419 Sep 202019 Sep 2020
EN 786:1996+A2:2009Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - MechaPresumption ended18 Dec 200919 Sep 202019 Sep 2020
EN 848-1:2007+A2:2012Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle verticPresumption ended15 Nov 201219 Sep 202019 Sep 2020
EN ISO 11200:2014Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the deterPresumption ended13 Feb 201519 Sep 202019 Sep 2020
EN ISO 4254-5:2009Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)Presumption ended26 May 201019 Sep 202019 Sep 2020
EN ISO 4254-7:2009Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 425Presumption ended26 May 201019 Sep 202019 Sep 2020
EN 61029-2-4:2011Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grindersPresumption ended18 Nov 201124 Jun 202024 Jun 2020
EN 60745-2-8:2009Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblersPresumption ended18 Dec 200902 May 202002 May 2020
EN 1710:2005+A1:2008Equipment and components intended for use in potentially explosive atmospheres in underground minesPresumption ended08 Sep 200919 Mar 202019 Mar 2020
EN 60745-2-11:2010Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (Presumption ended20 Oct 201023 Dec 201923 Dec 2019
EN 61029-2-9:2012Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre sawsPresumption ended05 Apr 201315 Nov 201915 Nov 2019
EN 61029-2-10:2010Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off griPresumption ended20 Oct 201019 Oct 201919 Oct 2019
EN 60745-2-14:2009Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planersPresumption ended18 Dec 200931 Aug 201931 Aug 2019
EN 60745-2-2:2010Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impaPresumption ended20 Oct 201021 Aug 201921 Aug 2019
EN 60745-2-4:2009Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishersPresumption ended26 May 201021 Aug 201921 Aug 2019
EN 60745-2-5:2010Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular sawsPresumption ended08 Apr 201121 Aug 201921 Aug 2019
EN 60745-2-9:2009Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappersPresumption ended18 Dec 200921 Aug 201921 Aug 2019
EN 61029-2-1:2012Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benPresumption ended05 Apr 201321 Aug 201921 Aug 2019
EN 61029-2-6:2010Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills wPresumption ended20 Oct 201021 Aug 201921 Aug 2019
EN 115-1:2008+A1:2010Safety of escalators and moving walks - Part 1: Construction and installationPresumption ended26 May 201031 Jan 201931 Jan 2019
EN 1459:1998+A3:2012Safety of industrial trucks - Self-propelled variable reach trucksPresumption ended23 Mar 201230 Sep 201830 Sep 2018
EN 12312-12:2002+A1:2009Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipmentPresumption ended08 Sep 200930 Jun 201830 Jun 2018
EN 12312-13:2002+A1:2009Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipmentPresumption ended08 Sep 200930 Jun 201830 Jun 2018
EN 13241-1:2003+A1:2011Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistancPresumption ended18 Nov 201130 Jun 201830 Jun 2018
EN 13898:2003+A1:2009Machine tools - Safety - Sawing machines for cold metalPresumption ended08 Sep 200930 Jun 201830 Jun 2018
EN 14033-3:2009Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirPresumption ended26 May 201030 Jun 201830 Jun 2018
EN 14033-3:2009+A1:2011Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirPresumption ended29 Feb 201230 Jun 201830 Jun 2018
EN 15695-1:2009Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous subsPresumption ended26 May 201030 Jun 201830 Jun 2018
EN 15695-2:2009Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous subsPresumption ended26 May 201030 Jun 201830 Jun 2018
EN 1870-18:2013Safety of woodworking machines - Circular sawing machines - Part 18: Dimension sawsPresumption ended28 Nov 201330 Jun 201830 Jun 2018
EN 609-1:1999+A2:2009Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splittersPresumption ended18 Dec 200930 Jun 201830 Jun 2018
EN ISO 11554:2008Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and tempPresumption ended08 Sep 200930 Jun 201830 Jun 2018
EN 50223:2010Stationary electrostatic application equipment for ignitable flock material - Safety requirementsPresumption ended20 Oct 201013 Apr 201813 Apr 2018
EN 13204:2004+A1:2012Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirementsPresumption ended24 Aug 201230 Nov 201730 Nov 2017
EN 30326-1:1994Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (IPresumption ended08 Sep 200930 Nov 201730 Nov 2017
EN 378-2:2008+A1:2009Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, tPresumption ended08 Sep 200930 Nov 201730 Nov 2017
EN 378-2:2008+A2:2012Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, tPresumption ended24 Aug 201230 Nov 201730 Nov 2017
EN ISO 11111-1:2009Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)Presumption ended18 Dec 200930 Nov 201730 Nov 2017
EN 12312-6:2004+A1:2009Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipmentPresumption ended08 Sep 200930 Sep 201730 Sep 2017
EN 12312-3:2003+A1:2009Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehiclesPresumption ended08 Sep 200931 Jul 201731 Jul 2017
EN 12601:2010Reciprocating internal combustion engine driven generating sets - SafetyPresumption ended08 Apr 201130 Jun 201730 Jun 2017
EN 13218:2002+A1:2008Machine tools - Safety - Stationary grinding machinesPresumption ended08 Sep 200930 Jun 201730 Jun 2017
EN 15503:2009+A1:2013Garden equipment - Garden blowers, vacuums and blower/vacuums - SafetyPresumption ended11 Apr 201430 Jun 201730 Jun 2017
EN 13561:2004+A1:2008External blinds - Performance requirements including safetyPresumption ended08 Sep 200928 Feb 201728 Feb 2017
EN 13659:2004+A1:2008Shutters - Performance requirements including safetyPresumption ended08 Sep 200928 Feb 201728 Feb 2017
EN 280:2013Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - ExaminatiPresumption ended28 Nov 201328 Feb 201728 Feb 2017
EN 1417:1996+A1:2008Plastics and rubber machines - Two roll mills - Safety requirementsPresumption ended08 Sep 200931 Dec 201631 Dec 2016
EN ISO 14122-1:2001Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access betweenPresumption ended20 Oct 201031 Dec 201631 Dec 2016
EN ISO 14122-2:2001Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 141Presumption ended20 Oct 201031 Dec 201631 Dec 2016
EN ISO 14122-3:2001Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISPresumption ended20 Oct 201031 Dec 201631 Dec 2016
EN ISO 14122-4:2004Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004)Presumption ended08 Apr 201131 Dec 201631 Dec 2016
EN ISO 11145:2008Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)Presumption ended08 Sep 200930 Sep 201630 Sep 2016
EN 13478:2001+A1:2008Safety of machinery - Fire prevention and protectionPresumption ended08 Sep 200909 Sep 201609 Sep 2016
EN ISO 20361:2009Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)Presumption ended08 Sep 200909 Sep 201609 Sep 2016
EN 626-2:1996+A1:2008Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: MetPresumption ended08 Sep 200930 Jun 201630 Jun 2016
EN ISO 13849-1:2008Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 138Presumption ended08 Sep 200930 Jun 201630 Jun 2016
EN 12779:2004+A1:2009Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related perPresumption ended18 Dec 200931 May 201631 May 2016
EN 13020:2004+A1:2010Road surface treatment machines - Safety requirementsPresumption ended20 Oct 201031 May 201631 May 2016
EN 14973:2006+A1:2008Conveyor belts for use in underground installations - Electrical and flammability safety requirementsPresumption ended08 Sep 200931 May 201631 May 2016
EN 626-1:1994+A1:2008Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: PrPresumption ended08 Sep 200931 May 201631 May 2016
EN 953:1997+A1:2009Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guardPresumption ended08 Sep 200931 May 201631 May 2016
EN ISO 13850:2008Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)Presumption ended08 Sep 200931 May 201631 May 2016
EN 1539:2009Dryers and ovens, in which flammable substances are released - Safety requirementsPresumption ended26 May 201013 May 201613 May 2016
EN 1570-1:2011Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landingsPresumption ended29 Feb 201213 May 201613 May 2016
EN 1808:1999+A1:2010Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - TePresumption ended20 Oct 201013 May 201613 May 2016
EN 1870-17:2007+A2:2009Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawinPresumption ended18 Dec 200913 May 201613 May 2016
EN 1870-17:2012Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawinPresumption ended13 Feb 201513 May 201613 May 2016
EN ISO 3691-6:2013Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2Presumption ended11 Jul 201413 May 201613 May 2016
EN ISO 4254-1:2013Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)Presumption ended28 Nov 201313 May 201613 May 2016
EN 1218-4:2004+A2:2009Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)Presumption ended08 Sep 200931 Mar 201631 Mar 2016
EN 13870:2005+A1:2010Food processing machinery - Chop cutting machines - Safety and hygiene requirementsPresumption ended20 Oct 201031 Mar 201631 Mar 2016
EN 1674:2000+A1:2009Food processing machinery - Dough and pastry brakes - Safety and hygiene requirementsPresumption ended26 May 201031 Mar 201631 Mar 2016
EN 12041:2000+A1:2009Food processing machinery - Moulders - Safety and hygiene requirementsPresumption ended18 Dec 200929 Feb 201629 Feb 2016
EN 12043:2000+A1:2010Food processing machinery - Intermediate provers - Safety and hygiene requirementsPresumption ended08 Apr 201129 Feb 201629 Feb 2016
EN 12268:2003+A1:2010Food processing machinery - Band saw machines - Safety and hygiene requirementsPresumption ended20 Oct 201029 Feb 201629 Feb 2016
EN 12547:1999+A1:2009Centrifuges - Common safety requirementsPresumption ended08 Sep 200929 Feb 201629 Feb 2016
EN 12882:2008Conveyor belts for general purpose use - Electrical and flammability safety requirementsPresumption ended08 Sep 200929 Feb 201629 Feb 2016
EN 13001-1:2004+A1:2009Cranes - General design - Part 1: General principles and requirementsPresumption ended08 Sep 200929 Feb 201629 Feb 2016
EN 13001-2:2011Crane safety - General design - Part 2: Load actionsPresumption ended18 Nov 201129 Feb 201629 Feb 2016
EN 13871:2005+A1:2010Food processing machinery - Cubes cutting machinery - Safety and hygiene requirementsPresumption ended20 Oct 201029 Feb 201629 Feb 2016
EN 1501-1:2011Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collectPresumption ended18 Nov 201129 Feb 201629 Feb 2016
EN 15059:2009Snow grooming equipment - Safety requirementsPresumption ended08 Sep 200929 Feb 201629 Feb 2016
EN 15811:2009Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923Presumption ended18 Dec 200929 Feb 201629 Feb 2016
EN 16230-1:2013Leisure karts - Part 1: Safety requirements and test methods for kartsPresumption ended28 Nov 201329 Feb 201629 Feb 2016
EN 16307-1:2013Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propellPresumption ended05 Apr 201329 Feb 201629 Feb 2016
EN 415-1:2000+A1:2009Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipmPresumption ended08 Sep 200929 Feb 201629 Feb 2016
EN 453:2000+A1:2009Food processing machinery - Dough mixers - Safety and hygiene requirementsPresumption ended26 May 201029 Feb 201629 Feb 2016
EN 454:2000+A1:2009Food processing machinery - Planetary mixers - Safety and hygiene requirementsPresumption ended26 May 201029 Feb 201629 Feb 2016
EN ISO 23125:2010Machine tools - Safety - Turning machines (ISO 23125:2010)Presumption ended20 Oct 201029 Feb 201629 Feb 2016
EN 12851:2005+A1:2010Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiePresumption ended26 May 201015 Jan 201615 Jan 2016
EN 61029-2-11:2009Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre Presumption ended18 Dec 200903 Sep 201503 Sep 2015
EN 61029-2-1:2010Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benPresumption ended20 Oct 201003 Sep 201503 Sep 2015
EN 61029-2-9:2009Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre sawsPresumption ended18 Dec 200903 Sep 201503 Sep 2015
EN 61496-1:2004Safety of machinery - Electro-sensitive protective equipment -- Part 1: General requirements and testsPresumption ended26 May 201010 May 201528 Sep 2026
EN 60335-2-67:2009Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment Presumption ended18 Dec 200903 May 201503 May 2015
EN 60335-2-68:2009Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extractionPresumption ended18 Dec 200903 May 201503 May 2015
EN 60335-2-72:2009Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machinPresumption ended18 Dec 200903 May 201503 May 2015
EN 1088:1995+A2:2008Safety of machinery - Interlocking devices associated with guards - Principles for design and selectionPresumption ended08 Sep 200930 Apr 201530 Apr 2015
EN 60335-2-79:2009Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure clPresumption ended18 Dec 200903 Apr 201503 Apr 2015
EN 60335-2-69:2009Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuPresumption ended18 Dec 200928 Mar 201528 Mar 2015
EN 1127-2:2002+A1:2008Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mininPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 12042:2005+A1:2010Food processing machinery - Automatic dividers - Safety and hygiene requirementsPresumption ended08 Apr 201113 Feb 201513 Feb 2015
EN 12110:2002+A1:2008Tunnelling machines - Air locks - Safety requirementsPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 12111:2002+A1:2009Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirementsPresumption ended18 Dec 200913 Feb 201513 Feb 2015
EN 12312-14:2006+A1:2009Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boardingPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 12312-2:2002+A1:2009Aircraft ground support equipment - Specific requirements - Part 2: Catering vehiclesPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 12336:2005+A1:2008Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipmenPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 12881-1:2005+A1:2008Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner testsPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 13000:2010Cranes - Mobile cranesPresumption ended26 May 201013 Feb 201513 Feb 2015
EN 289:2004+A1:2008Plastics and rubber machines - Presses - Safety requirementsPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 791:1995+A1:2009Drill rigs - SafetyPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 815:1996+A2:2008Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirementsPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN 996:1995+A3:2009Piling equipment - Safety requirementsPresumption ended08 Sep 200913 Feb 201513 Feb 2015
EN ISO 11200:2009Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the deterPresumption ended18 Dec 200913 Feb 201513 Feb 2015
EN 280:2001+A2:2009Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - ExaminatiPresumption ended18 Dec 200931 Jan 201531 Jan 2015
EN 13525:2005+A2:2009Forestry machinery - Wood chippers - SafetyPresumption ended18 Dec 200908 Jan 201508 Jan 2015
EN 60335-1:2002Household and similar electrical appliances - Safety -- Part 1: General requirementsPresumption ended20 Oct 201021 Nov 201428 Sep 2026
EN 12312-4:2003+A1:2009Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridgesPresumption ended08 Sep 200930 Sep 201430 Sep 2014
EN 836:1997+A4:2011Garden equipment - Powered lawnmowers - SafetyPresumption ended18 Nov 201130 Sep 201430 Sep 2014
EN 12643:1997+A1:2008Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)Presumption ended08 Sep 200931 Aug 201431 Aug 2014
EN 13120:2009Internal blinds - Performance requirements including safetyPresumption ended08 Sep 200931 Aug 201431 Aug 2014
EN 13524:2003+A1:2009Highway maintenance machines - Safety requirementsPresumption ended08 Sep 200931 Aug 201431 Aug 2014
EN 15011:2011Cranes - Bridge and gantry cranesPresumption ended20 Jul 201131 Aug 201431 Aug 2014
EN ISO 3691-5:2009Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:200Presumption ended28 Nov 201331 Aug 201431 Aug 2014
EN 1127-1:2007Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodologyPresumption ended18 Dec 200931 Jul 201431 Jul 2014
EN 14043:2005+A1:2009High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and perfPresumption ended08 Sep 200931 Jul 201431 Jul 2014
EN 14044:2005+A1:2009High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and pePresumption ended08 Sep 200931 Jul 201431 Jul 2014
EN ISO 2867:2008Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)Presumption ended08 Sep 200931 Jul 201431 Jul 2014
EN 1870-1:2007+A1:2009Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliPresumption ended08 Sep 200931 May 201431 May 2014
EN 12622:2009Safety of machine tools - Hydraulic press brakesPresumption ended26 May 201030 Apr 201430 Apr 2014
EN 15503:2009Garden equipment - Garden blowers, vacuums and blower/vacuums - SafetyPresumption ended26 May 201030 Apr 201430 Apr 2014
EN 1870-11:2003+A1:2009Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cPresumption ended18 Dec 200930 Apr 201430 Apr 2014
EN 1870-12:2003+A1:2009Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machinesPresumption ended18 Dec 200930 Apr 201430 Apr 2014
EN 690:1994+A1:2009Agricultural machinery - Manure spreaders - SafetyPresumption ended18 Dec 200930 Apr 201430 Apr 2014
EN 1953:1998+A1:2009Atomising and spraying equipment for coating materials - Safety requirementsPresumption ended18 Dec 200931 Mar 201431 Mar 2014
EN 12016:2004+A1:2008Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - ImmunityPresumption ended08 Sep 200928 Feb 201428 Feb 2014
EN 12957:2001+A1:2009Machine tools - Safety - Electro discharge machinesPresumption ended08 Sep 200928 Feb 201428 Feb 2014
EN ISO 11252:2008Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)Presumption ended08 Sep 200928 Feb 201428 Feb 2014
EN 13001-3-1:2012Cranes - General Design - Part 3-1: Limit States and proof competence of steel structurePresumption ended05 Jun 201231 Jan 201431 Jan 2014
EN 13732:2002+A2:2009Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitabiliPresumption ended08 Sep 200931 Jan 201431 Jan 2014
EN 1760-3:2004+A1:2009Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and tePresumption ended08 Sep 200931 Jan 201431 Jan 2014
EN 1846-3:2002+A1:2008Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performancePresumption ended08 Sep 200931 Jan 201431 Jan 2014
EN 474-5:2006+A1:2009Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavatorsPresumption ended23 Mar 201231 Jan 201431 Jan 2014
EN 13418:2004+A1:2008Plastics and rubber machines - Winding machines for film or sheet - Safety requirementsPresumption ended08 Sep 200930 Nov 201330 Nov 2013
EN 1870-10:2003+A1:2009Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automaticPresumption ended18 Dec 200930 Nov 201330 Nov 2013
EN 415-6:2006+A1:2009Safety of packaging machines - Part 6: Pallet wrapping machinesPresumption ended18 Dec 200930 Nov 201330 Nov 2013
EN ISO 12100-1:2003Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (Presumption ended18 Dec 200930 Nov 201330 Nov 2013
EN ISO 12100-2:2003Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-Presumption ended18 Dec 200930 Nov 201330 Nov 2013
EN ISO 14121-1:2007Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)Presumption ended08 Sep 200930 Nov 201330 Nov 2013
EN ISO 3164:2008Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limitPresumption ended08 Sep 200930 Nov 201330 Nov 2013
EN ISO 4254-1:2009Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)Presumption ended18 Dec 200930 Nov 201330 Nov 2013
EN 12312-1:2001+A1:2009Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairsPresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 12312-9:2005+A1:2009Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loadersPresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 12750:2001+A1:2009Safety of woodworking machines - Four-sided moulding machinesPresumption ended18 Dec 200928 Nov 201328 Nov 2013
EN 13135-1:2003+A1:2010Cranes - Equipment - Part 1: Electrotechnical equipmentPresumption ended20 Oct 201028 Nov 201328 Nov 2013
EN 13135-2:2004+A1:2010Cranes - Equipment - Part 2: Non-electrotechnical equipmentPresumption ended08 Apr 201128 Nov 201328 Nov 2013
EN 1755:2000+A1:2009Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mPresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 1760-1:1997+A1:2009Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and tePresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 1760-2:2001+A1:2009Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and tePresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 1807:1999+A1:2009Safety of woodworking machines - Band sawing machinesPresumption ended18 Dec 200928 Nov 201328 Nov 2013
EN 1846-2:2009Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performancePresumption ended18 Dec 200928 Nov 201328 Nov 2013
EN 1915-1:2001+A1:2009Aircraft ground support equipment - General requirements - Part 1: Basic safety requirementsPresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 474-1:2006+A1:2009Earth-moving machinery - Safety - Part 1: General requirementsPresumption ended08 Sep 200928 Nov 201328 Nov 2013
EN 792-12:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciPresumption ended08 Sep 200930 Jun 201330 Jun 2013
EN ISO 11148-3:2010Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010)Presumption ended08 Apr 201130 Jun 201330 Jun 2013
EN ISO 11148-4:2010Hand-held non-electric power tools - Safety requirements - Part 4: Non­rotary percussive power tools (ISO 1114Presumption ended08 Apr 201130 Jun 201330 Jun 2013
EN ISO 11148-6:2010Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fastenersPresumption ended08 Apr 201130 Jun 201330 Jun 2013
EN 12159:2000+A1:2009Builders hoists for persons and materials with vertically guided cagesPresumption ended18 Dec 200931 May 201331 May 2013
EN 1870-8:2001+A1:2009Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing maPresumption ended18 Dec 200931 May 201331 May 2013
EN 1870-15:2004+A1:2009Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines withPresumption ended18 Dec 200930 Apr 201330 Apr 2013
EN 1870-16:2005+A1:2009Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cuttinPresumption ended18 Dec 200930 Apr 201330 Apr 2013
EN 1870-7:2002+A1:2009Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with intePresumption ended18 Dec 200930 Apr 201330 Apr 2013
EN 848-3:2007+A2:2009Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controllPresumption ended18 Dec 200930 Apr 201330 Apr 2013
EN ISO 13849-2:2008Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)Presumption ended08 Sep 200930 Apr 201330 Apr 2013
EN 1870-5:2002+A1:2009Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sPresumption ended18 Dec 200931 Mar 201331 Mar 2013
EN 1870-9:2000+A1:2009Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for Presumption ended18 Dec 200931 Mar 201331 Mar 2013
EN 848-1:2007+A1:2009Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle verticPresumption ended18 Dec 200931 Mar 201331 Mar 2013
EN 848-2:2007+A1:2009Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fPresumption ended18 Dec 200931 Mar 201331 Mar 2013
EN 12001:2003+A1:2009Conveying, spraying and placing machines for concrete and mortar - Safety requirementsPresumption ended26 May 201028 Mar 201328 Mar 2013
EN 792-7:2001+A1:2008Hand-held non-electric power tools - Safety requirements - Part 7: GrindersPresumption ended08 Sep 200928 Feb 201328 Feb 2013
EN ISO 19432:2008Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-offPresumption ended08 Sep 200931 Jan 201331 Jan 2013
EN ISO 10218-1:2008Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:20Presumption ended08 Sep 200901 Jan 201301 Jan 2013
EN 12999:2011Cranes - Loader cranesPresumption ended08 Apr 201131 Dec 201231 Dec 2012
EN 745:1999+A1:2009Agricultural machinery - Rotary mowers and flail-mowers - SafetyPresumption ended18 Dec 200931 Dec 201231 Dec 2012
EN 859:2007+A1:2009Safety of woodworking machines - Hand fed surface planing machinesPresumption ended26 May 201031 Dec 201231 Dec 2012
EN 860:2007+A1:2009Safety of woodworking machines - One side thickness planing machinesPresumption ended18 Dec 200931 Dec 201231 Dec 2012
EN 861:2007+A1:2009Safety of woodworking machines - Surface planing and thicknessing machinesPresumption ended18 Dec 200931 Dec 201231 Dec 2012
EN 13617-1:2004+A1:2009Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispPresumption ended08 Sep 200930 Nov 201230 Nov 2012
EN 13951:2003+A1:2008Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in usePresumption ended08 Sep 200931 Oct 201231 Oct 2012
EN 1870-13:2007+A1:2009Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machinesPresumption ended18 Dec 200930 Sep 201230 Sep 2012
EN 1870-14:2007+A1:2009Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machinesPresumption ended18 Dec 200930 Sep 201230 Sep 2012
EN 1870-4:2001+A1:2009Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manualPresumption ended18 Dec 200930 Sep 201230 Sep 2012
EN ISO 3745:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for Presumption ended18 Dec 200930 Sep 201230 Sep 2012
EN 940:2009Safety of woodworking machines - Combined woodworking machinesPresumption ended18 Dec 200931 Aug 201231 Aug 2012
EN 792-1:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechaPresumption ended08 Sep 200924 Aug 201224 Aug 2012
EN 1034-3:1999+A1:2009Safety of machinery - Safety requirements for the design and construction of paper making and finishing machinPresumption ended26 May 201030 Jun 201230 Jun 2012
EN 792-10:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 10: Compression power toolsPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN 792-11:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shearsPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN 792-2:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power toolsPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN 792-5:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drillsPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN 792-8:2001+A1:2008Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishersPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 11680-1:2008Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fittPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 11680-2:2008Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for Presumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 11681-1:2008Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest sePresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 11681-2:2008Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree servPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 11806:2008Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN ISO 22867:2008Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - VibPresumption ended08 Sep 200930 Jun 201230 Jun 2012
EN 792-9:2001+A1:2008Hand-held non-electric power tools - Safety requirements - Part 9: Die grindersPresumption ended08 Sep 200901 Jun 201201 Jun 2012
EN 14861:2004+A1:2009Forest machinery - Self propelled machinery - Safety requirementsPresumption ended18 Dec 200931 May 201231 May 2012
EN ISO 3450:2008Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and tPresumption ended08 Sep 200931 May 201231 May 2012
EN 12409:2008Plastics and rubber machines - Thermoforming machines - Safety requirementsPresumption ended08 Sep 200930 Apr 201230 Apr 2012
EN 1570:1998+A2:2009Safety requirements for lifting tablesPresumption ended18 Dec 200930 Apr 201230 Apr 2012
EN 15746-2:2010Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requiremenPresumption ended20 Oct 201030 Apr 201230 Apr 2012
EN 693:2001+A1:2009Machine tools - Safety - Hydraulic pressesPresumption ended08 Sep 200931 Mar 201231 Mar 2012
EN 1501-1:1998+A2:2009Refuse collection vehicles and their associated lifting devices - General requirements and safety requirementsPresumption ended29 Dec 200929 Feb 201229 Feb 2012
EN 267:2009Automatic forced draught burners for liquid fuelsPresumption ended26 May 201029 Feb 201229 Feb 2012
EN 12649:2008Concrete compactors and smoothing machines - SafetyPresumption ended08 Sep 200931 Jan 201231 Jan 2012
EN 982:1996+A1:2008Safety of machinery - Safety requirements for fluid power systems and their components - HydraulicsPresumption ended08 Sep 200930 Nov 201130 Nov 2011
EN 983:1996+A1:2008Safety of machinery - Safety requirements for fluid power systems and their components - PneumaticsPresumption ended08 Sep 200930 Nov 201130 Nov 2011
EN 13001-2:2004+A3:2009Crane safety - General design - Part 2: Load effectsPresumption ended08 Sep 200918 Nov 201118 Nov 2011
EN 13411-4:2002+A1:2008Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketingPresumption ended08 Sep 200930 Sep 201130 Sep 2011
EN ISO 22868:2008Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - EngineePresumption ended08 Sep 200930 Sep 201130 Sep 2011
EN 13683:2003+A1:2009Garden equipment - Integrally powered shredders/chippers - SafetyPresumption ended08 Sep 200920 Jul 201120 Jul 2011
EN 704:1999+A1:2009Agricultural machinery - Pick-up balers - SafetyPresumption ended18 Dec 200930 Jun 201130 Jun 2011
EN ISO 3746:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using anPresumption ended18 Dec 200930 Jun 201130 Jun 2011
EN ISO 3747:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in sPresumption ended18 Dec 200930 Jun 201130 Jun 2011
EN 792-3:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappersPresumption ended08 Sep 200930 Apr 201130 Apr 2011
EN 792-4:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power toolsPresumption ended08 Sep 200930 Apr 201130 Apr 2011
EN 792-6:2000+A1:2008Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fastenersPresumption ended08 Sep 200930 Apr 201130 Apr 2011
EN ISO 3741:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for Presumption ended18 Dec 200930 Apr 201130 Apr 2011
EN ISO 3743-1:2009Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sourPresumption ended18 Dec 200930 Apr 201130 Apr 2011
EN ISO 3744:2009Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in Presumption ended18 Dec 200930 Apr 201130 Apr 2011
EN 1493:1998+A1:2008Vehicle liftsPresumption ended08 Sep 200908 Apr 201108 Apr 2011
EN 1846-2:2001+A3:2009Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performancePresumption ended08 Sep 200928 Feb 201128 Feb 2011
EN 709:1997+A2:2009Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoPresumption ended08 Sep 200931 Dec 201031 Dec 2010
EN 999:1998+A1:2008Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the huPresumption ended08 Sep 200930 Nov 201030 Nov 2010
EN ISO 11201:2009Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workPresumption ended18 Dec 200930 Nov 201030 Nov 2010
EN ISO 11202:2009Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workPresumption ended18 Dec 200930 Nov 201030 Nov 2010
EN ISO 11204:2009Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a workPresumption ended18 Dec 200930 Nov 201030 Nov 2010
EN 1114-2:1998+A1:2008Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletPresumption ended08 Sep 200920 Oct 201020 Oct 2010
EN 12012-2:2001+A2:2008Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisersPresumption ended08 Sep 200920 Oct 201020 Oct 2010
EN 115-1:2008Safety of escalators and moving walks - Part 1: Construction and installationPresumption ended08 Sep 200930 Sep 201030 Sep 2010
EN 12254:1998+A2:2008Screens for laser working places - Safety requirements and testingPresumption ended08 Sep 200930 Sep 201030 Sep 2010
EN 1777:2004+A1:2009Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testingPresumption ended08 Sep 200930 Sep 201030 Sep 2010
EN 1777:2010Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testingPresumption ended26 May 201030 Sep 201030 Sep 2010
EN 13684:2004+A2:2009Garden equipment - Pedestrian controlled lawn aerators and scarifiers - SafetyPresumption ended18 Dec 200930 Jun 201030 Jun 2010
EN 14017:2005+A1:2008Agricultural and forestry machinery - Solid fertilizer distributors - SafetyPresumption ended08 Sep 200931 Jan 201031 Jan 2010
EN ISO 10821:2005Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)Presumption ended18 Dec 200928 Dec 200928 Dec 2009
Presumption ended
Every entry for this reference carries an end of legal effect that has passed.